PDA

View Full Version : MIHEC 359-125 FB (9mm) Rerun 4 Cav HP or 6 Cav Solid Brass



Wasalmonslayer
03-04-2021, 05:27 PM
Hello Guys the design has been asked about several times so here we go let’s rerun it.
We are going to keep it simple in options 1 HP design 1 Solid design.


-Casts .359 - 125 grain HP or 130 grain solid
- Hi Tek is an option also adds another 5 grns roughly 130 hp 135 solid
-Steel sprue plate
-Hardened steel alignment pins
- Allen keys are included
-RCBS/Lyman top punch is included
- Use LEE 6 cavity handle or MP mold handles (NOT included)
-Sample of sprue lube is included (15ml)
- 3 set of pins (round, penta, blank)


-Price is as follows
- 4 Cavity Brass HP: 135 euros plus shipping, all pins, top punch and allen keys
- 6 Cavity Brass Solid: 95 euros plus shipping, top punch and allen keys
- 8 Cavity Aluminum Solid: 95 euros plus shipping, top punch and allen keys
- Group buy discount of 15% off will be given at check out time
- Shipping is approximately 16 euros for first mold.
If you purchase 2 molds it is 18 euros (for both)
If you take 3 molds shipping is approx 20 euros....

Shipping is with DHL, these are live rates AND CAN CHANGE UP OR DOWN



Please give your disguised address and what mold design you would like.

EYE CANDY -278964278964278965

Wasalmonslayer
03-04-2021, 05:29 PM
Group Buy Sign Up List -

HP List

1) max at yvmarine dot com - 4 Cav HP Hi Tek
2) Bda UZat 8 0 AT g Mai L dot coM - 4 Cav HP Hi tek
3) Spanglercustomknives at medot com - 4 Cav HP
4) Bsbenj at msn dot com - 4 Cav HP
5) Etijsma85 AT Gmail - 4 Cav HP HiTek
6) Spanglercustomknives at medot com - 4 Cav HP
7) ess ess pee one at hotmail dot com - 4 Cav HP
8) ess ess pee one at hotmail dot com - 4 Cav HP
9) ess ess pee one at hotmail dot com - 4 Cav HP HiTek
10) 6shot at gmail dot com - 4 Cav HP HiTek
11) Lumberman31 at gmail dot com - 4 Cav HP
12) 6shot at gmail dot com - 4 Cav HP HiTek
13)
14)

Solid List

1) max at yvmarine dot com - 6 Cav Brass Hi Tek
2) HHWADKINSIII at aol dot com - 8 Cav Alum
3) mvintx 85 at yahoo dot com - 8 Cav Alum with Handles
4)
5)
6)
7)

Wasalmonslayer
03-04-2021, 05:31 PM
Awesome photo compliments of Gamseks great photo skills :)

Lets get her rolling

Need a 100 HP pins to go active on this one and then it is up to Miha to close it when production is happening!

Thanks Gents
WS

DAFzipper
03-05-2021, 07:37 AM
Any chance you can offer a .357 diameter? Less sizing after powder coat.

Sent from my SM-T713 using Tapatalk

Wasalmonslayer
03-05-2021, 11:45 AM
Any chance you can offer a .357 diameter? Less sizing after powder coat.

Sent from my SM-T713 using Tapatalk

Trying to streamline buys to make production easier.
These size easy after coating to .357.
These are what I cast and powder coat now and size to .357 like butter!

Grits&giggles
03-05-2021, 03:03 PM
Love the design and weight, sorry, but holding out for a gas check also. In

Wasalmonslayer
03-08-2021, 04:47 PM
Love the design and weight, sorry, but holding out for a gas check also. In

This design has never had a gas check and probable won't it does not need one it shoots perfect in every 9mm/38-357 I have tried it in if you get fit and alloy right it will scare you how good it shoots!

Not sure if the design lends itself to a GC as you would machine off most of the rear band and if you use a star lube sizer the hydraulic pressure it creates would unseat the check off the base of the bullet.

Ask me how I know....
I designed a bullet that way once and it was perfect up until I tried to size and lube it :-?

Grits&giggles
03-10-2021, 10:41 AM
Grits, Bda UZat 8 0 AT g Mai L dot coM. 4 cav hp hi- tec.

Grits&giggles
03-10-2021, 10:46 AM
I'm in for the 4 cav hp hi-tec mold, just thought there would be ample room for a gc with the hi-tech option. Concerns for double base powders dissolving pc.

oldhenry
03-10-2021, 11:32 PM
I'll take a 8 cav. aluminum with lube grooves & BB if available as an option.
HHWADKINSIII at aol dot com

BJK
03-11-2021, 12:53 PM
deleted. I allowed my exuberance to get ahead of my expertise.

mvintx
03-11-2021, 11:52 PM
OK, sign me up. 8 cav aluminum solid, lube groove with handles; mvintx 85 at yahoo dot com

Wasalmonslayer
03-12-2021, 12:16 AM
All added guys

Thanks
WS

Wasalmonslayer
03-12-2021, 12:18 AM
I'm in for the 4 cav hp hi-tec mold, just thought there would be ample room for a gc with the hi-tech option. Concerns for double base powders dissolving pc.

There would be room on hi tek but that would require a new cherry and we would be waiting that much longer this one he has a cherry inhouse and it is quicker because it is a rerun.

If enough interest is there would could start another buy in GC but it may take a couple of years to get the mold

Thanks
WS

oldhenry
03-12-2021, 08:55 AM
My request was for a solid aluminum 8 cav. with lube groove. You have it listed for Hi Tek: please correct.
Thanks,
Henry

Wasalmonslayer
03-12-2021, 09:43 AM
My request was for a solid aluminum 8 cav. with lube groove. You have it listed for Hi Tek: please correct.
Thanks,
Henry

Thanks you for verifying all fixed up.
WS

Low Budget Shooter
03-12-2021, 12:29 PM
Wasalmonslayer, thanks for running this. For those of you who are not yet familiar with this bullet, this is the best cast 9mm bullet ever. The combination of accuracy, expansion, ease of loading (shallow in case), weight, is cast bullet 9mm perfection. This is all I use for 9mm anymore. If in doubt, just get two of this mold, sell all your other 9mm molds, and be happy!

Gone_rabid
03-14-2021, 12:39 PM
Pardon the ignorance but was is “hi tek option”?

Michael J. Spangler
03-14-2021, 08:51 PM
Please set me up with a 4 cavity HP brass
Spanglercustomknives at medot com

Wasalmonslayer
03-15-2021, 04:00 PM
Please set me up with a 4 cavity HP brass
Spanglercustomknives at medot com


You are added

Thank you
WS

Grits&giggles
03-15-2021, 10:13 PM
Wasalmonslayer, can you please remove " Grits, "and the space after, as this is not in my email address, sorry. Trying to reduce confusion. Thanks

Grits&giggles
03-16-2021, 10:45 PM
There would be room on hi tek but that would require a new cherry and we would be waiting that much longer this one he has a cherry inhouse and it is quicker because it is a rerun.

If enough interest is there would could start another buy in GC but it may take a couple of years to get the mold

Thanks
WS
I think I'll try this mold out first, thanks.

Wasalmonslayer
03-17-2021, 08:59 AM
Wasalmonslayer, can you please remove " Grits, "and the space after, as this is not in my email address, sorry. Trying to reduce confusion. Thanks

Sorry bout that got it fixed now.

Thanks for catching it!
WS

Johns87
03-18-2021, 03:42 PM
Pardon the ignorance but was is “hi tek option”?

I was wondering what he meant by this also. Anyone?

DAFzipper
03-18-2021, 08:40 PM
Pardon the ignorance but was is “hi tek option”?No lube grooves for alternative coating like hi-tech or powder coating

Sent from my SM-T713 using Tapatalk

Wasalmonslayer
03-19-2021, 08:22 AM
Sorry for the delay I scanned right over your post. Hope the explanation below helps.

You have two designs one for traditional wax based lube applied with a lube sizer.
The other design is HiTek or smooth side no lube groove and this is for powder coating, HiTek coating, bcb coating.
I have tried all three and they all work very well. Each has its own attributes and all have a place on my loading bench it just depends what you are trying to do.

Johns87
03-20-2021, 07:51 PM
DA and Wasal. Thanks for the explanation. Just wanted to be sure before adding my name to the group buy.

Johns87 at comcast dot net 8 cavity aluminum solid + handles

Thanks

Stmtrn
03-21-2021, 02:00 AM
Put me in for a 4 cav brass with lube groove. Bsbenj at msn dot com.

Wasalmonslayer
03-21-2021, 09:42 AM
DA and Wasal. Thanks for the explanation. Just wanted to be sure before adding my name to the group buy.

Johns87 at comcast dot net 8 cavity aluminum solid + handles

Thanks

You are added under regular lube groove as you did not state hi tek let me know if that is NOT correct.

Thanks
WS

Wasalmonslayer
03-21-2021, 09:45 AM
Put me in for a 4 cav brass with lube groove. Bsbenj at msn dot com.

You are added under 4 Cav hp as 4 Cav solid is not an option please let me know if this is NOT correct.

Thank you
WS

Gamsek
03-21-2021, 12:26 PM
https://uploads.tapatalk-cdn.com/20210321/bb4996d68ca3c3e7b862d192427f3aeb.jpg
https://uploads.tapatalk-cdn.com/20210321/a2186d66dcf3cfd283398caf3ad999c3.jpg
https://uploads.tapatalk-cdn.com/20210321/d813b7608c2e38c1e9dabe88ad9d8d39.jpg

One of the best 9mm bullets, specially in HP

Johns87
03-21-2021, 07:48 PM
You are added under regular lube groove as you did not state hi tek let me know if that is NOT correct.

Thanks
WS

WS,

Please put me in for Hi Tek. I'll get the hang of this lingo soon, I hope.

Thanks, John

Wasalmonslayer
03-22-2021, 12:25 AM
https://uploads.tapatalk-cdn.com/20210321/bb4996d68ca3c3e7b862d192427f3aeb.jpg
https://uploads.tapatalk-cdn.com/20210321/a2186d66dcf3cfd283398caf3ad999c3.jpg
https://uploads.tapatalk-cdn.com/20210321/d813b7608c2e38c1e9dabe88ad9d8d39.jpg

One of the best 9mm bullets, specially in HP

Very nice!

Makes me want to go cast more of them :)
Already have two coffee cans cast and coated but those look amazing!

Wasalmonslayer
03-22-2021, 12:27 AM
WS,

Please put me in for Hi Tek. I'll get the hang of this lingo soon, I hope.

Thanks, John

Got you fixed up :)

Stmtrn
03-22-2021, 12:50 AM
Yes with the hp. Thanks brian

Wasalmonslayer
03-22-2021, 10:52 PM
Your welcome

Gone_rabid
03-23-2021, 05:17 AM
I’ll take this please.

- HITEK. 4 Cavity Brass HP: 135 euros plus shipping, all pins, top punch and Allen keys

Wasalmonslayer
03-23-2021, 08:35 AM
I’ll take this please.

- HITEK. 4 Cavity Brass HP: 135 euros plus shipping, all pins, top punch and Allen keys

Need your disguised email address to get you listed.

Thank you
WS

Michael J. Spangler
03-23-2021, 09:01 AM
Can you put me down for a second 4 cavity HP all pins please? Ordering one for a friend. Thank you!

Gone_rabid
03-23-2021, 09:03 AM
Need your disguised email address to get you listed.

Thank you
WS

Oops. It was still early. Etijsma85 AT Gmail

Wasalmonslayer
03-23-2021, 01:23 PM
Got you guys fixed up

Thank you
WS

Johns87
04-02-2021, 08:11 PM
WS,

would you please remove me from the list. I received an Email from Miha that he had the mold in stock and since this is my first mold, I wanted to get it now so I can start casting. Thanks and sorry for the inconvenience.

John (Johns87)

T bone
04-03-2021, 11:35 PM
How do I get on the list for the 4 cavity mold

ssp1
04-04-2021, 07:43 AM
Would like 2 of the 125 hp and one 130 hp hi tek.
Thanks ess ess pee one at hotmail

ssp1
04-04-2021, 07:46 AM
Would like 2 of the 125 hp and one 130 hp hi tek.
Thanks, ess ess pee one at hotmail dot com
4 cavity on all three

sixshot
04-04-2021, 03:37 PM
4 cavity HP hi tek. 6shot@gmail.com

Dick

Wasalmonslayer
04-05-2021, 11:43 PM
WS,

would you please remove me from the list. I received an Email from Miha that he had the mold in stock and since this is my first mold, I wanted to get it now so I can start casting. Thanks and sorry for the inconvenience.

John (Johns87)

Got you removed glad you got one :)

Wasalmonslayer
04-05-2021, 11:44 PM
How do I get on the list for the 4 cavity mold

Please just post your disguised email address and what design you want.

Thanks
WS

Wasalmonslayer
04-05-2021, 11:46 PM
Would like 2 of the 125 hp and one 130 hp hi tek.
Thanks, ess ess pee one at hotmail dot com
4 cavity on all three

Got you added.

Thanks
WS

Wasalmonslayer
04-05-2021, 11:47 PM
4 cavity HP hi tek. 6shot@gmail.com

Dick

Got you added

Thank you
WS

Wasalmonslayer
04-05-2021, 11:47 PM
Almost live boys please tell all your friends :)

Lumberman31
04-06-2021, 02:34 PM
4 cav brass HP lube groove
Lumberman31 at gmail dot com
Thanks

Wasalmonslayer
04-08-2021, 10:48 PM
4 cav brass HP lube groove
Lumberman31 at gmail dot com
Thanks

Got you added

Thanks
WS

sixshot
04-10-2021, 12:51 PM
Please change my order to 2 of the 4 cavity Hi Tek HP molds. Thanks!

Dick

Wasalmonslayer
04-10-2021, 04:29 PM
Please change my order to 2 of the 4 cavity Hi Tek HP molds. Thanks!

Dick

Done deal

Thank you!
WS

justingrosche
04-17-2021, 06:13 AM
Max, I’ll take a brass 4 cav Hi tek please. JustingroscheATyahoo.com

monkey wrangler
04-17-2021, 06:29 AM
Put me down for the brass HP mold all pins

m gehlen mesa at aol dot com

Wasalmonslayer
04-25-2021, 11:10 AM
Will update as soon as we can modify this buy list sorry about this guys....

Thanks
WS

Wasalmonslayer
04-27-2021, 03:27 PM
[QUOTE=Wasalmonslayer;5135334]Group Buy Sign Up List -

HP List

1) max at yvmarine dot com - 4 Cav HP Hi Tek
2) Bda UZat 8 0 AT g Mai L dot coM - 4 Cav HP Hi tek
3) Spanglercustomknives at medot com - 4 Cav HP
4) Bsbenj at msn dot com - 4 Cav HP
5) Etijsma85 AT Gmail - 4 Cav HP HiTek
6) Spanglercustomknives at medot com - 4 Cav HP
7) ess ess pee one at hotmail dot com - 4 Cav HP
8) ess ess pee one at hotmail dot com - 4 Cav HP
9) ess ess pee one at hotmail dot com - 4 Cav HP HiTek
10) 6shot at gmail dot com - 4 Cav HP HiTek
11) Lumberman31 at gmail dot com - 4 Cav HP
12) 6shot at gmail dot com - 4 Cav HP HiTek
13) JustingroscheATyahoo.com - 4 Cav HP HiTek
14) m gehlen mesa at aol dot com - 4 Cav HP
15)
16)
17)
18)
19)
20)

Solid List

1) max at yvmarine dot com - 6 Cav Brass Hi Tek
2) HHWADKINSIII at aol dot com - 8 Cav Alum
3)
4)
5)
6)
7)

Wasalmonslayer
04-27-2021, 03:29 PM
List is moving down the page now guys new forum changes are creating a little hiccup but we will get through it :)

Thanks
WS

mvintx
05-03-2021, 12:37 PM
I've signed up for the 147/155 GB. Can you take me off this list please?

mvintx
05-03-2021, 12:38 PM
I've signed up for the 147/155 GB. Can you take me off this list please? I'm #3 on the solid list. mvintx85.

mvintx
05-04-2021, 09:53 AM
I've signed up for the 147/155 GB. Can you take me off this list please? I'm $3 on the solid list. mvintx85.

Wasalmonslayer
05-04-2021, 03:42 PM
Got you removed.

Thanks
WS