ACTIVE: RERUN - MP 358-93 HP or 100 SOLID

[Lakehouse2012]

This GB is now closed and awaiting invoicing to all customers.


https://www.mp-molds.com/product/mp-358-93-hp-pb/

- Casting at .358
- HP or Solid (You Choose)
- Flat Base
- Grooved
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys are included
- RCBS/Lyman top punch is included
- Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +$20)
-Sample of sprue lube is included (15ml)

Pins included will be Round and a Blank pin.


Weight is based on using Wheel Weights:
100 grains as a Solid
93 grains as an HP

Click image for larger version.

278832

Mold Choices and Pricing


- 4-cav Brass for HP --> TBD Euro
- 6-cav Brass for Solid --> TBD Euro
- 8-cav Aluminum for Solid --> TBD Euro


NEW SHIPPING DETAILS

16 euros for 1 mold.
18 euros for 2 molds
20 euros for 3 or more molds

Shipping is with DHL, these are live rates AND CAN CHANGE UP OR DOWN

GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.

Group Buy List

4 cavity HP (Brass mold)
1) (Gone_rabid) - 4-cav, HP +handles - Etijsma85 AT gmail.com
2) (rdwarrior) - 4-cav, HP - rdwarrior AT charter DOT net
3) (jcduchock) - 4-cav, HP - jduchock AT bellsouth DOT net
4) (glockky) - 4-cav, HP - twgrubb3 at g mail dot com
5) (Blkpwdrbuff) - 4-cav, HP - redroo1956 AT g mail dot com
6) (Cooperman) - 4 cav, HP +Handles - tdbrosnan AT gmail DOT com
7) (Old School Big Bore) - 4 cav, HP +handles - cctxsniper AT yahoo DOT com
8) (mrmachinist) - 4 cav, HP +handles - Kylesavoie at gmail dot com
9)
10) (SoonerEd) - 4 cavity brass HP - ed at trilogy-health dot com.
11) (monkey wrangler) - 4 cavity HP, all pins +handles - m gehlen mesa at aol dot com
12) (Jackbrush) - 4 cav HP, all pins +handles - robertcawbrush Aaattt gmail dot com
13) (psychodad) - 4 cav HP - psychodad1000 at yahoo dot com.
14)
15)
16)
17)
18)


6 cavity Solid (Brass mold)
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)

8-cav (Aluminum mold)
1) (Wheelgun) - 8cav aluminum - Sullinszane at yahoo dot com
2) (Lakehouse2012) - 8cav - sorgatz At ameritech d0t net
3)
4)
5)
6)
7)
8)
9)
10)

[Gone_rabid]

I’m interested.

Etijsma85 AT gmail.com

4 cavity HP brass

[Lakehouse2012]

I’m interested.

Etijsma85 AT gmail.com

4 cavity HP brass

You are 1st on the list!

[rdwarrior]

I'm in
- 4-cav Brass for HP --> TBD Euro

rdwarrior AT charter DOT net

[StuBach]

https://uploads.tapatalk-cdn.com/20210302/03bd83a3ae59be8bee618ae3b4f82550.jpg


For those interested in this mold, it’s a fantastic caster for both 9mm and 380.

My nephew refers to these as deadly crayons.

[Gamsek]

https://uploads.tapatalk-cdn.com/20210302/fe0d7188628274a59b088dbf0d08e4a3.jpg
https://uploads.tapatalk-cdn.com/20210302/b77a21cd4b681c7eac2d6b0a8b8d4b10.jpg
https://uploads.tapatalk-cdn.com/20210302/d42d7065b15af81206418fcee386164a.jpg
Perfect for .380. Easy to cast.
https://uploads.tapatalk-cdn.com/20210302/b14ea2119d0d2ce09ed0bcfe7051b46f.jpg
In .380 case...

[Lakehouse2012]

I've added you to the list. When I hear back from Miha I'll put the cost in. Thanks!


I'm in
- 4-cav Brass for HP --> TBD Euro

rdwarrior AT charter DOT net

[jcduchock]

I'm in.

4 cavity HP (Brass mold)

jduchock AT bellsouth DOT net

[glockky]

I’m in 4 cavity HP twgrubb3 at g mail dot com

[Blkpwdrbuff]

I'm in for a 4 cavity brass HP.
redroo1956 AT g mail dot com
Blkpwdrbuff

[Lakehouse2012]

I'm in.

4 cavity HP (Brass mold)

jduchock AT bellsouth DOT net

You are on the list

[Lakehouse2012]

I’m in 4 cavity HP twgrubb3 at g mail dot com

You are on the list

[Lakehouse2012]

I'm in for a 4 cavity brass HP.
redroo1956 AT g mail dot com
Blkpwdrbuff

You are on the list!

[Cooperman]

Put me down for 4 cavity brass HP, tdbrosnan AT gmail DOT com

[Lakehouse2012]

Put me down for 4 cavity brass HP, tdbrosnan AT gmail DOT com

I've got you on the list.

[Wheelgun]

Put me down for a 8cav aluminum mold.
Sullinszane at yahoo dot com
Thanks

[Lakehouse2012]

Put me down for a 8cav aluminum mold.
Sullinszane at yahoo dot com
Thanks

You're on the list!

[Old School Big Bore]

Please count me in!
cctxsniper AT yahoo DOT com
4 cav brass HP plus one pair handles.
Thanks very much - Ed <><

[mrmachinist]

I’m in 4 cav brass hp with handles

Kylesavoie at gmail dot com


Sent from my iPhone using Tapatalk

[Gone_rabid]

I need handles too. Not sure if that matters right now or not.

[Lakehouse2012]

OK Guys, I've got you all fixed up!


I need handles too. Not sure if that matters right now or not.


I’m in 4 cav brass hp with handles

Kylesavoie at gmail dot com


Sent from my iPhone using Tapatalk


Please count me in!
cctxsniper AT yahoo DOT com
4 cav brass HP plus one pair handles.
Thanks very much - Ed <><

[Cooperman]

Put me down for 4 cavity brass HP, tdbrosnan AT gmail DOT com
Please add a handle to my order
Thank you.

[Lakehouse2012]

Please add a handle to my order
Thank you.

I've added you. thanks

[glockky]

Bump for a good lead saver mold

[Lakehouse2012]

10 molds get this bumped over to the active section... only need 1 more I believe

[Lonegun1894]

Could you go ahead and put me down for a 4-cavity HP Brass? Lonegun1894 at yahoo dot com. Thank you!

[Lakehouse2012]

Could you go ahead and put me down for a 4-cavity HP Brass? Lonegun1894 at yahoo dot com. Thank you!

Thanks, I've got you on the list!

[Lonegun1894]

Thank you, Sir!

[SoonerEd]

Will you put me down for a 4 cavity brass HP?

ed at trilogy-health dot com.

[SoonerEd]

Am I posting this in the right place?

[Blkpwdrbuff]

Hey Lakehouse,
Did you see SoonerEd's post?
I believe that gives us the 10 hollowpoint moulds so that it could get moved to active.
Blkpwdrbuff

[SoonerEd]

I guess this thread is dead?

[Lakehouse2012]

I guess this thread is dead?

Sorry guys, there is an issue with the discussion threads. as soon as I move over to active I will update all that are interested. I'll do that in the morning

[Lonegun1894]

I guess this thread is dead?

I hope it goes through still.

[Lonegun1894]

Sorry guys, there is an issue with the discussion threads. as soon as I move over to active I will update all that are interested. I'll do that in the morning

Thank you, Sir

[Lakehouse2012]

Moving post #1 to bottom of thread, in order to modify the list in tracking.

-----------------------------------------------------------------------------------

- Casting at .358
- HP or Solid (You Choose)
- Flat Base
- Grooved
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys are included
- RCBS/Lyman top punch is included
- Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +$20)
-Sample of sprue lube is included (15ml)

Pins included will be Round and a Blank pin.


Weight is based on using Wheel Weights:
100 grains as a Solid
93 grains as an HP

Click image for larger version.

278832

Mold Choices and Pricing


- 4-cav Brass for HP --> TBD Euro
- 6-cav Brass for Solid --> TBD Euro
- 8-cav Aluminum for Solid --> TBD Euro


NEW SHIPPING DETAILS

16 euros for 1 mold.
18 euros for 2 molds
20 euros for 3 or more molds

Shipping is with DHL, these are live rates AND CAN CHANGE UP OR DOWN

GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.

Group Buy List

4 cavity HP (Brass mold)
1) (Gone_rabid) - 4-cav, HP +handles - Etijsma85 AT gmail.com
2) (rdwarrior) - 4-cav, HP - rdwarrior AT charter DOT net
3) (jcduchock) - 4-cav, HP - jduchock AT bellsouth DOT net
4) (glockky) - 4-cav, HP - twgrubb3 at g mail dot com
5) (Blkpwdrbuff) - 4-cav, HP - redroo1956 AT g mail dot com
6) (Cooperman) - 4 cav, HP +Handles - tdbrosnan AT gmail DOT com
7) (Old School Big Bore) - 4 cav, HP +handles - cctxsniper AT yahoo DOT com
8) (mrmachinist) - 4 cav, HP +handles - Kylesavoie at gmail dot com
9) (Lonegun1894) - 4-cav HP - Lonegun1894 at yahoo dot com
10) (SoonerEd) - 4 cavity brass HP - ed at trilogy-health dot com.
11)
12)
13)
14)
15)


6 cavity Solid (Brass mold)
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)

8-cav (Aluminum mold)
1) (Wheelgun) - 8cav aluminum - Sullinszane at yahoo dot com
2)
3)
4)
5)
6)
7)
8)
9)
10)

[Lakehouse2012]

Ok, finally got this thread fixed up. I've added Ed and moved to active, now we need 15 more HP's in order to get to Miha's 100 pin requirement.


Will you put me down for a 4 cavity brass HP?

ed at trilogy-health dot com.

[monkey wrangler]

Put me down for a brass 4 cavity HP mold with al pins and a set of handles. Please

m gehlen mesa at aol dot com

[Lakehouse2012]

Thanks, you are on the list!


Put me down for a brass 4 cavity HP mold with al pins and a set of handles. Please

m gehlen mesa at aol dot com

[Jackbrush]

Put me on for 1 of what monkey wrangler wanted. HP and pins, please

[Lakehouse2012]

Put me on for 1 of what monkey wrangler wanted. HP and pins, please

I need an email for you as well, please put it on a new post and I can disguise it for you.

[SoonerEd]

Ok, finally got this thread fixed up. I've added Ed and moved to active, now we need 15 more HP's in order to get to Miha's 100 pin requirement.

Thanks

[Lakehouse2012]

Put me on for 1 of what monkey wrangler wanted. HP and pins, please

Thank you Sir, saw your PM to me and have added you to the list.

[Jackbrush]

Lit

[glockky]

Bumping this one up

[SoonerEd]

I got an e-mail notice from MP today saying this is back in stock. Does that mean we should be getting something from them soon about our group buy?

[Lakehouse2012]

I got an e-mail notice from MP today saying this is back in stock. Does that mean we should be getting something from them soon about our group buy?

They are only the solid and there were only 3 in stock, I suspect he found them from existing and is listing them for sale.

[mrmachinist]

They are only the solid and there were only 3 in stock, I suspect he found them from existing and is listing them for sale.

The email I received stated it’s HP.


Sent from my iPhone using Tapatalk

[SoonerEd]

Me as well and it says there are 8 HP's in stock.

[Lakehouse2012]

I put a message into Miha this morning, I havent heard anything back yet.

[SoonerEd]

He is now showing 22 in stock of 358-93 HP PB.

[Lakehouse2012]

@MiHec

What is the status? They say you show many molds in stock but not being called close on this GB. Please tell the folks what is going on.

Sent from my T799B using Tapatalk

[psychodad]

Mr Lakehouse,
I'm in for a 4 cavity brass HP, psychodad1000 at yahoo dot com.

Thanks

[Lakehouse2012]

Thanks Sir, I've updated you on to the list!


Mr Lakehouse,
I'm in for a 4 cavity brass HP, psychodad1000 at yahoo dot com.

Thanks

[Lonegun1894]

Could you please remove me from this GB? I’m #9 on the 4cav HP list. Thank you.

[Lakehouse2012]

Could you please remove me from this GB? I’m #9 on the 4cav HP list. Thank you.

Yes Sir, I've removed you.

[Lakehouse2012]

Miha wrote me this morning and said to close this one, so I believe you will all be getting an invoice soon,

[ranger391xt]

Sorry, not sure how I posted in this thread. sometimes it seems my phone has a mind of its own.

[SoonerEd]

Has anyone received an email yet?

[Blkpwdrbuff]

Anyone received an email yet or any other contact?
I haven't.

[Blkpwdrbuff]

Any updates?

[Lakehouse2012]

Miha wrote me on Wednesday and said he was sending out a mold, but I havent seen any tracking detail so I am not sure of the status... I think they are done with Holiday over there now, so maybe next week we will see more info.


Any updates?

[SoonerEd]

Any updates? Just want to make sure I haven't missed an e-mail.

[Blkpwdrbuff]

Has anyone gotten an invoice or other notification that these moulds are ready??

[StuBach]

Has anyone gotten an invoice or other notification that these moulds are ready??

I haven’t. Generally once someone sees on they post to alert everyone else to look for it

Edit: My apologies, I responded to a buy I’m not on. Thought this was the 147gr buy but the advice still stands. Once the invoices go out usually Miha or the Hancho will post that they are out and members will tag on saying they got the invoice. Same will happen when the molds start arriving.

Sent from my iPhone using Tapatalk

[Cooperman]

Nothing here, still waiting?

[Blkpwdrbuff]

Has there been any news on the progress of this group buy?
Just wondering.

[Blkpwdrbuff]

Still nothing?
I understand that Mia is busier than a one legged man in a butt kicking contest.
Hope we get a word soon.

[Blkpwdrbuff]

Lakehouse, any updates on this group buy?
Just wondering.
I just looked on his website and it says there are 26 available.
Maybe we are getting closer.
We can hope.

[glockky]

I also have not received an invoice

[Lakehouse2012]

Wow, just reading this, I so sorry for the disruption!

I'll get ahold of Miha immediately snd get this fixed.

@Miha- this needs your attention

[SoonerEd]

Neither have I.

[Blkpwdrbuff]

Just checked the MP website.
21 moulds still available!
Makes me wonder what is going on.

[Blkpwdrbuff]

Lakehouse
Please remove me from this group buy.
I just ordered one directly from MP.
Thanks for your efforts.
Blkpwdrbuff

[Gone_rabid]

Remove me as well please.

[mrmachinist]

Remove me as well #8 oh the hp list.

Thanks


Sent from my iPhone using Tapatalk

[glockky]

So what happened here? Did anyone receive an invoice?

[SoonerEd]

So what happened here? Did anyone receive an invoice?

Nope!

[Gamsek]

If you click on the link (page#1) you can see 4 HP in stock….

[SoonerEd]

I emailed Miha and he sent me the coupon code to get the GB discount. Got my mold ordered today.

[SoonerEd]

Got my mold today which is 5 days from when I ordered it with 2 of those days being the the weekend.