6.8 spc

[tbpollard]

I know the selection for molds in 6.8 SPC was fairly limited as of a few years ago. It seems like most of the molds were tailored to 270 win or other cartridges. Has anyone had any luck finding newer designs or found one that works particularly well with the 6.8 SPC? Bonus points if its still in production.

[SSGOldfart]

Sir the 6.8 bullet is the same as the 270 I like the 120grn. Shorter designs from NOE but one never knows when it is in stock[smilie=s:

[tbpollard]

Correct, the NOE 279-126-FN-E2-31 is the only one I've been able to get my hands on that my 6.8 seems to like.

[Harter66]

I have several and the .279-124 NOE is the easiest to work and get good to excellent results .

I have several 130s all were barn door loads in anything that would cycle , in an alloy less than lino .
I don't know what your use is but it's not too hard to get a load together with the NOE jacketed data and rifle gas that will get 1000 ftlb at 100 yd and in a GI barrel get 2" and a good HBAR an inch or less with a useful game alloy .