View Full Version : Lee 312-155 top punch
Joel Chavez
02-22-2021, 08:06 PM
What top punch are you guys using when sizing the Lee 322-155gc boolits? Thanks in advance.
Walks
02-22-2021, 08:31 PM
Lyman #413
gwpercle
02-23-2021, 08:53 PM
And if Lyman 413 isn't an exact and perfect fit ... custom fit the nose with a small ball of epoxy putty in the nose followed by the greased boolit nose , press together and let cure .
Perfect Fit .
Gary
Joel Chavez
02-27-2021, 12:27 AM
And if Lyman 413 isn't an exact and perfect fit ... custom fit the nose with a small ball of epoxy putty in the nose followed by the greased boolit nose , press together and let cure .
Perfect Fit .
Gary
Thanks bud
bimus
02-27-2021, 01:33 AM
I don't remember witch top pinch I used but I had one for round nose bullet and I drilled the in side so it would not touch the tip it worked very well if I did get a top punch mark on a cast bullet I pushed the bullet end of the loaded round in to some steel wool and gave it a few turns and it cleaned up real nice .
jaysouth
03-09-2021, 12:47 AM
In a back appendex in Lyman #4 Casting manual is a crossover chart showing which Lyman nose punch to use with RCBS and Lee bullets.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.