Lee 312-155 top punch

[Joel Chavez]

What top punch are you guys using when sizing the Lee 322-155gc boolits? Thanks in advance.

[Walks]

Lyman #413

[gwpercle]

And if Lyman 413 isn't an exact and perfect fit ... custom fit the nose with a small ball of epoxy putty in the nose followed by the greased boolit nose , press together and let cure .
Perfect Fit .
Gary

[Joel Chavez]

And if Lyman 413 isn't an exact and perfect fit ... custom fit the nose with a small ball of epoxy putty in the nose followed by the greased boolit nose , press together and let cure .
Perfect Fit .
Gary

Thanks bud

[bimus]

I don't remember witch top pinch I used but I had one for round nose bullet and I drilled the in side so it would not touch the tip it worked very well if I did get a top punch mark on a cast bullet I pushed the bullet end of the loaded round in to some steel wool and gave it a few turns and it cleaned up real nice .

[jaysouth]

In a back appendex in Lyman #4 Casting manual is a crossover chart showing which Lyman nose punch to use with RCBS and Lee bullets.