View Full Version : 10mm 155 grain CLHP over Longshot
Dougmcfalls
02-07-2021, 12:52 PM
Anyone have a suggested load for a 155 grain cast lead hollowpoint (powdercoated) with Longshot?
Sent from my SM-G960U using Tapatalk
Hodgdon’s sight appears to suggest 8.5 to 9.5 for similar bullet.
Dougmcfalls
02-09-2021, 08:47 AM
Hodgdon’s sight appears to suggest 8.5 to 9.5 for similar bullet.Thanks, I've tested with 8.5, 9 and 9.5. I am getting keyholing at these charges. I'm going to try 7.5 next.
Sent from my SM-G960U using Tapatalk
rintinglen
02-09-2021, 03:01 PM
Key holing for me usually means I need a bigger or softer boolit and maybe a hotter charge, or a faster burning powder. I would not go down that low.
onelight
02-09-2021, 03:43 PM
Key holing for me usually means I need a bigger or softer boolit and maybe a hotter charge, or a faster burning powder. I would not go down that low.
This has been my experience several times also.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.