View Full Version : What are people casting for .32 auto?
NuJudge
12-21-2008, 06:38 PM
I have a PP that has not been shot in quite awhile. I have brass, dies, etc.
CDD
45 2.1
12-21-2008, 06:55 PM
The RCBS 32 Caliber 77 gr. RN is an excellent boolit for the 32ACP.
9.3X62AL
12-22-2008, 02:30 AM
I've used Lyman #313249 in the 32 ACP for a long time with good results. It feeds well in my own PP.
I recently acquired a Lyman mould designed with the 32 ACP in mind, #311252. It is quite similar in form and weight to the RCBS boolit listed in 45-2.1's text above.
scrapcan
12-22-2008, 11:45 AM
311252 lyman is what we are currently using in a S&W marked Walther PPK-S. It shoots great. I cannot say the same for the quality of the magazines that cam with it. Both have cracked at the rear of the feed lips.
We also sized the 311252 using a flat nose punch and they feed a function fine also.
45 2.1
12-22-2008, 12:36 PM
NEI mold #73A is another good one.
http://www.neihandtools.com/catpages/mold_pg5.htm
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.