Push through sizers

[Dunross]

So, it looks like the NOE push through sizer is the way I want to go, but there is of course a hitch.

NOE is backordered on the sizing body die and out of stock on the 312 bushing.

Are there other companies who sell the NOE sizers and bushings?

I'll go with the LEE if I must, but I can't find anyone with the .311 die in stock. I can find the .314, but will that be too much of a squeeze for a .327 Fed Mag?

[Wheelguns 1961]

https://www.midwayusa.com/product/1018523537://
Midway shows the .311” in stock.

[PositiveCaster]

Broken link.








.

[Wheelguns 1961]

I don’t know what happened to the link. It worked when I first posted it. My point was that midway shows one in stock.

[Dunross]

https://www.midwayusa.com/product/1018523537

This one should work.

[rking22]

Might want to check the throats/bore on that 327 before ordering a sized. My 326 SP101 needs .313 minimum, .314 works fine. Just a suggestion, mine might be oddball.

[Wheelguns 1961]

My single sevens and my gp100 all have .314” throats, and that is the size that I shoot with great success.

[Dunross]

I went ahead and ordered the .314 Lee.

Also ordered the NOE die even thought it's backordered and a .314 bushing. The .312 and .313 are "out of stock."

Even 32 cal supplies are hard to find right now. Had to go with the .317 gas checks because Sage's is out of the .315s.

Ya gotta do what ya gotta do. Damn glad I have primers, powder, and plenty of lead to smelt!