Noe 311-242 for AR 300 BLK

[natchomamma]

I just acquired a 5 cavity plain base version of this mold. Planning on using this for subsonic loads in my AR. Anyone using this mold? Would you be willing to share load data and OAL? Are you having feeding issues?

Thanks for the help in advance.

[roharmon]

I use that bullet with powder coat in an AR pistol and 16 inch barrel with good results out to 100 yards. I have used: 1680, 296, Lil Gun and H110, but my best results are with 10.2 grains of I4198. I can check the length later tonight, but it fits right inside the magazine.

[natchomamma]

This would be awesome. Thanks for the help. What do you size the bullets to after you PC them?



I use that bullet with powder coat in an AR pistol and 16 inch barrel with good results out to 100 yards. I have used: 1680, 296, Lil Gun and H110, but my best results are with 10.2 grains of I4198. I can check the length later tonight, but it fits right inside the magazine.

[roharmon]

I size at .310, but I also ensure I shake off any excessive PC before baking.