PDA

View Full Version : cast in 357Sig



Tonto
12-29-2005, 09:21 PM
getting a 357Sig barrel for my CZ75B in 40, started reloading some LEE 120 TC sized to 356 today, have the Lee steel dies, set things up to slightly (ever so slightly) bell the case mouths and then crimped the slight bell out...I load on a RCBS Piggyback, ran them through seperately for crimp.....some, not all of the bullets were seated slightly deeper when crimped....unpredictable...will the LEE Factory Crimp die help. it is as I understand it, a taper crimp die...brass all once fired WW nickel..OAL at 1.140 (whatever max was listed in the manual....) Any advice?