PDA

View Full Version : Heavy Hollowpoint for .40 / 10mm



bowfin
12-15-2020, 05:01 PM
I would like to see a .400 mold that weighed 200 grains solid or at least 180 grains with a hollow point. I am not sure why everybody seems to be gravitating towards 160 grains or less for the 10mm and .40 S&W.

Mihec has nothing with a HP that is this heavy. Maybe if he ever gets caught up...

Gamsek
12-15-2020, 06:14 PM
Mihec 10mm - 200gr WFN / .40s&w - 180gr HP, 4-cavity, Brass
https://r.tapatalk.com/shareLink/topic?share_fid=9688&share_tid=171093&url=http%3A%2F%2Fcastboolits%2Egunloads%2Ecom%2Fsh owthread%2Ephp%3Ft%3D171093&share_type=t&link_source=app

https://uploads.tapatalk-cdn.com/20201215/52bbc3aff1845c0da2c1b6c19b247c21.jpg

There was something similar made, Oreo was honcho, Maybe Miha (MiHec) have some of overruns available

Gamsek
12-15-2020, 06:18 PM
CLOSED - Oreo/Miha 10mm WFN 220gr, 200gr, 190gr (rerun)
https://r.tapatalk.com/shareLink/topic?share_fid=9688&share_tid=351725&url=http%3A%2F%2Fcastboolits%2Egunloads%2Ecom%2Fsh owthread%2Ephp%3Ft%3D351725&share_type=t&link_source=apphttps://uploads.tapatalk-cdn.com/20201215/3d5d7e5d779f5b1657991780213ff13a.jpg

And I guess the heavier version of previous Oreo

bowfin
12-15-2020, 10:37 PM
Thanks for the info, Gamsek. I did look on Mihec's website, I didn't see this mold listed, but it is exactly what I would want.

Gamsek
12-16-2020, 02:19 AM
Thanks for the info, Gamsek. I did look on Mihec's website, I didn't see this mold listed, but it is exactly what I would want.

Maybe he has some left, not listed in his web shop. Try to send him an email, this is how I get few of my MP’s - not listed, from
Old group buys.... For best response use this email

sales@mp-molds.com

cwlongshot
12-16-2020, 07:48 AM
I have a couple different molds to 200g in HPs for the .400

For a real heavy I BUY THEM. :groner: I know I know, But I just dont use enough to really justify the mold Cost. Anyhow. i buy them from GT bullets AS CAST so I powder coat and size then. Good prices various hardnesses and quantities.

They shoot really well In all my 10mms. I load the heavy load with blue dot to almost 1200 fos from my long KKM barrel. They expand to the bottom of the HP with a beautiful mushroom.

Might be a option for you too before ya decide.

CW

bowfin
12-16-2020, 11:11 AM
cwlongshot, I WILL order some heavier hollowpoints from GT Bullets before buying a mold. We will see how they shoot out of a carbine...and some .401 Herter revolvers. Wait time is currently three months, but what isn't out of stock or on back order these days?

Thanks!

mattw
12-16-2020, 11:51 AM
I use an NOE 200 WFN with hollow point pins. It is not the same one that he now lists, mine is a more semi-auto friendly profile. I use it in 610's, Astra's, and 1911's.

seaboltm
12-16-2020, 12:04 PM
The Oreo design is awesome. Try to get another group buy together. The 200 grain solid hits with authority out of my 6 inch G20 with more energy than a 357 magnum.

FLINTNFIRE
12-16-2020, 12:30 PM
I have that mold 403 200grain wfn I am using the hollow point it weighs 183 grains , feeds in my S&W where the lighter ones are to short never have made it as a solid , probably should .

I made a mistake , I glanced at the mold and it was brass with hollow point pins , but it is a NOE mold with the NOE pin style , I apologize for my mistake .

NYBushBro
01-12-2021, 02:29 PM
Is this GB ACTIVE? Please reply.

cwlongshot
01-13-2021, 10:16 AM
Did ya get the GT bullets yet? What do ya think?

CW

bowfin
01-15-2021, 11:01 AM
Did ya get the GT bullets yet? What do ya think?

The last I checked, they had a three month backlog of orders.:-?

Correction: I just checked again and it is over four months now.

cwlongshot
01-15-2021, 01:01 PM
OMG...

Wow!!

Sorry I did not know!!

CW

bowfin
01-21-2021, 02:52 PM
I am not sure exactly how Mihec runs his group buys now, but I would be eager to help out.

JPD
02-13-2021, 10:04 AM
Bump.Bump...


Sent from my iPhone using Tapatalk

JPD
02-14-2021, 02:29 PM
If someone would honcho this, I would buy a couple of moulds.
[emoji16][emoji16][emoji16]


Sent from my iPhone using Tapatalk

phil3333
02-18-2021, 03:20 AM
I'm interested

FLINTNFIRE
02-18-2021, 03:09 PM
I am interested in one .402 lube groove all the pins

monadnock#5
02-18-2021, 10:23 PM
I'd be very interested in the 200-220 grain variant.

bowfin
02-21-2021, 06:59 PM
I would be the honcho for this mold, but I don't know how Mihec does this these days. Can anybody advise?

NYBushBro
03-02-2021, 04:26 PM
I'd be interested in a 2-cavity HP mold that drops a 180 grain deep HP slug. Not sure which of the previous designs would fit the bill...will have to check out the drawings again.

justindad
11-13-2021, 12:22 PM
I’d be interested, especially in a 200 gr version without lube grooves.

cwlongshot
11-13-2021, 05:30 PM
I just picked up a Arsenal 403-200 WFN PC bullet and cast it yesterday

BEAUTIFUL BULLET!! I have been waiting for that MO 402-200 for more than a YEAR!! LOVE LOVE MP MOLDS, but not the wait.

https://youtu.be/KoIJ0tAaUZ8

sixshot
11-14-2021, 05:12 PM
Just got an NOE 5 cavity WFN 190 gr mold last week, makes a great bullet. Casts easy & shoots great in my Kimber 10mm. Would be interested in a heavy HP if a group buy comes up from anyone.
Did a strange thing happen yesterday that I've never seen before. I'm not a big time semi auto guy but I do load a lot of 9mm, 40 & 45 acp. I shot about 5 mags through my Kimber Eclipse & when I was picking up the brass, which had been thrown a long ways, I noticed 3 of them were pretty mangled on the ends. All bullets were powder coated.
This was once fired brass, mixed Federal & Winchester mostly. All of the brass had been checked after loading, did the plunk test in my barrel, everything checked out fine. All ammo fired & ejected fine. Used 2 different loads with the 190 gr bullet, seated to 1.260" & using CCI 300 primers. This was 3 rounds out of about 40 rounds fired! Loads were 8.5 grs of Longshot & 13.5 grs of AA9. Thoughts?
https://i.imgur.com/YEi8eo3h.jpg
https://i.imgur.com/0x2ni27h.jpg
Dick

justindad
11-15-2021, 03:36 PM
Looks like they got pinched by the slide during the ejection process, or maybe these were at the range before you were and you are mistaking these as part of the 40 you shot. Are there witness marks anywhere else on these?

cwlongshot
11-15-2021, 09:46 PM
I get a pretty bad scuff and flat side on hot loads but never have seen it cause a torn case mouth!!

Good point are you sure that you shot these?


CW

sixshot
11-16-2021, 04:06 PM
Yes, they came out of my gun, one of them hit me on the shoulder. Shot again yesterday, same loads & no problems!

Dick

NYBushBro
11-29-2021, 11:19 AM
I'd be in for a 2-cav heavy 40 HP MOLD if we can talk Miha into doing an Oreo re-run.

el general
12-28-2021, 11:27 AM
I am interested in 200gr solid WFN. One lube groove. Beavel base. 6 or 8 cavities.

el general
03-07-2022, 04:16 PM
Is this stopped??

Duke3026
03-09-2022, 03:25 PM
I’d be interested in this mold.

NYBushBro
03-10-2022, 01:29 PM
Anyone PM'd Miha about the possibility of this?

el general
04-20-2022, 03:08 PM
Is the post/discussion dead??

mainiac
04-21-2022, 06:35 PM
Im intrested as well!!!