PDA

View Full Version : Heavy Hollowpoint for .40 / 10mm



bowfin
12-15-2020, 05:01 PM
I would like to see a .400 mold that weighed 200 grains solid or at least 180 grains with a hollow point. I am not sure why everybody seems to be gravitating towards 160 grains or less for the 10mm and .40 S&W.

Mihec has nothing with a HP that is this heavy. Maybe if he ever gets caught up...

Gamsek
12-15-2020, 06:14 PM
Mihec 10mm - 200gr WFN / .40s&w - 180gr HP, 4-cavity, Brass
https://r.tapatalk.com/shareLink/topic?share_fid=9688&share_tid=171093&url=http%3A%2F%2Fcastboolits%2Egunloads%2Ecom%2Fsh owthread%2Ephp%3Ft%3D171093&share_type=t&link_source=app

https://uploads.tapatalk-cdn.com/20201215/52bbc3aff1845c0da2c1b6c19b247c21.jpg

There was something similar made, Oreo was honcho, Maybe Miha (MiHec) have some of overruns available

Gamsek
12-15-2020, 06:18 PM
CLOSED - Oreo/Miha 10mm WFN 220gr, 200gr, 190gr (rerun)
https://r.tapatalk.com/shareLink/topic?share_fid=9688&share_tid=351725&url=http%3A%2F%2Fcastboolits%2Egunloads%2Ecom%2Fsh owthread%2Ephp%3Ft%3D351725&share_type=t&link_source=apphttps://uploads.tapatalk-cdn.com/20201215/3d5d7e5d779f5b1657991780213ff13a.jpg

And I guess the heavier version of previous Oreo

bowfin
12-15-2020, 10:37 PM
Thanks for the info, Gamsek. I did look on Mihec's website, I didn't see this mold listed, but it is exactly what I would want.

Gamsek
12-16-2020, 02:19 AM
Thanks for the info, Gamsek. I did look on Mihec's website, I didn't see this mold listed, but it is exactly what I would want.

Maybe he has some left, not listed in his web shop. Try to send him an email, this is how I get few of my MPís - not listed, from
Old group buys.... For best response use this email

sales@mp-molds.com

cwlongshot
12-16-2020, 07:48 AM
I have a couple different molds to 200g in HPs for the .400

For a real heavy I BUY THEM. :groner: I know I know, But I just dont use enough to really justify the mold Cost. Anyhow. i buy them from GT bullets AS CAST so I powder coat and size then. Good prices various hardnesses and quantities.

They shoot really well In all my 10mms. I load the heavy load with blue dot to almost 1200 fos from my long KKM barrel. They expand to the bottom of the HP with a beautiful mushroom.

Might be a option for you too before ya decide.

CW

bowfin
12-16-2020, 11:11 AM
cwlongshot, I WILL order some heavier hollowpoints from GT Bullets before buying a mold. We will see how they shoot out of a carbine...and some .401 Herter revolvers. Wait time is currently three months, but what isn't out of stock or on back order these days?

Thanks!

mattw
12-16-2020, 11:51 AM
I use an NOE 200 WFN with hollow point pins. It is not the same one that he now lists, mine is a more semi-auto friendly profile. I use it in 610's, Astra's, and 1911's.

seaboltm
12-16-2020, 12:04 PM
The Oreo design is awesome. Try to get another group buy together. The 200 grain solid hits with authority out of my 6 inch G20 with more energy than a 357 magnum.

FLINTNFIRE
12-16-2020, 12:30 PM
I have that mold 403 200grain wfn I am using the hollow point it weighs 183 grains , feeds in my S&W where the lighter ones are to short never have made it as a solid , probably should .

I made a mistake , I glanced at the mold and it was brass with hollow point pins , but it is a NOE mold with the NOE pin style , I apologize for my mistake .

NYBushBro
01-12-2021, 02:29 PM
Is this GB ACTIVE? Please reply.

cwlongshot
01-13-2021, 10:16 AM
Did ya get the GT bullets yet? What do ya think?

CW

bowfin
01-15-2021, 11:01 AM
Did ya get the GT bullets yet? What do ya think?

The last I checked, they had a three month backlog of orders.:-?

Correction: I just checked again and it is over four months now.

cwlongshot
01-15-2021, 01:01 PM
OMG...

Wow!!

Sorry I did not know!!

CW

bowfin
01-21-2021, 02:52 PM
I am not sure exactly how Mihec runs his group buys now, but I would be eager to help out.

JPD
02-13-2021, 10:04 AM
Bump.Bump...


Sent from my iPhone using Tapatalk

JPD
02-14-2021, 02:29 PM
If someone would honcho this, I would buy a couple of moulds.
[emoji16][emoji16][emoji16]


Sent from my iPhone using Tapatalk

phil3333
02-18-2021, 03:20 AM
I'm interested

FLINTNFIRE
02-18-2021, 03:09 PM
I am interested in one .402 lube groove all the pins

monadnock#5
02-18-2021, 10:23 PM
I'd be very interested in the 200-220 grain variant.

bowfin
02-21-2021, 06:59 PM
I would be the honcho for this mold, but I don't know how Mihec does this these days. Can anybody advise?

NYBushBro
03-02-2021, 04:26 PM
I'd be interested in a 2-cavity HP mold that drops a 180 grain deep HP slug. Not sure which of the previous designs would fit the bill...will have to check out the drawings again.