Mp 432-640

[Iwsbull]

I have looked and cannot find the dimensions on this boolit. I am trying to figure out if it will work in a Henry rifle or if it is a maybe. If anyone is running this or has some measurements I would really appreciate it. Also if it doesn’t, what other NOE or MP hollow point mold will work and what kind of accuracy and velocities are you getting.
Thanks

[Mal Paso]

The nose is about .385" from the top of the crimp groove and the rim is quite thin if you use the large hollowpoint pin. The Hammer might be a better choice but it sold out.

The regular 432-640 has a meplat about .300". I couldn't find a drawing but evidently there was a short nose version 'cuz I found a drawing of it

[sukivel]

.754 long
.307 meplat
.361 base to crimp groove
.060 hp rim (with large pin)
.169 lube groove to base
.075 lube groove width

Mine looks a little longer than the previous drawing.

https://uploads.tapatalk-cdn.com/20201208/09f60581f98e3db7328b508b4c93ce54.jpg



Sent from my iPhone using Tapatalk

[Iwsbull]

Thank y’all.