475 linebaugh

[rickiesrevenge]

What mold or molds should I be looking at for a freedom arms 475 or 480. I'm interested in a 477-640 but they arent in stock.

Aaron

Sent from my SM-G892A using Tapatalk

[Tatume]

Try Lee C476-325-RF or Lee C476-400-RF. Unfortunately they are not available in the excellent Lee six-cavity blocks, the but the two-cavity molds produce good bullets too.

[rickiesrevenge]

I'll look into those

[Targa]

I have that mold. It works great, it drops 380 grain bullets at a .477 diameter with my alloy.

271766

[rickiesrevenge]

Is that the lee 400gr? How long is the nose on those bullets? I bought a MP 477-640 mold the other day. Need to make a push through sizer on my lathe so I can size them after casting.

[Targa]

It is the Lee 400grain. I’ll have to get back to you on nose length

[Targa]

The nose length from the bottom crimp groove is .510 and .488 from the top crimp groove.

[rickiesrevenge]

Those are too long for my linebaugh cylinder then. I could probably use them in the 480 though.