Bigbore.729
11-17-2020, 02:02 PM
Howdy guys. A while back I had commissioned Badlands Precision to design and manufacture custom solids for my 12 Gauge from Hell project. The slugs were made on a CNC lathe out of solid copper round stock. The slugs come out to .729" and 726.5 grains. They are designed to stabilize at my twist rate at velocities 2000 FPS+. A lot of people were asking me to send some to Jeff, so I sent him 10 projectiles to test out.
Here recently, Jeff contacted me to inform me he has begun his testing and gave me a little bit of a sneak preview of their performance at normal shotgun velocities. Here are the photos he sent.
271601
271602
I won't give too much away, but I will say I am very impressed by their performance at such low velocities. The expanded slug contacted something extremely hard, which resulted in some crazy symmetrical expansion.
I will be sure to link his video here when it comes out. I'm thinking it will be up sometime this week.
Here recently, Jeff contacted me to inform me he has begun his testing and gave me a little bit of a sneak preview of their performance at normal shotgun velocities. Here are the photos he sent.
271601
271602
I won't give too much away, but I will say I am very impressed by their performance at such low velocities. The expanded slug contacted something extremely hard, which resulted in some crazy symmetrical expansion.
I will be sure to link his video here when it comes out. I'm thinking it will be up sometime this week.