Evoken
11-06-2020, 06:59 PM
I recently bought this older 1 hole mold off of a member here and I have to say I am impressed! This is my first steel mold, as I am cheap and all.my others are lee aluminum. This bad boy maintained heat once heated l, and dropped keepers very quickly.
Slow going for certain with a single drop, but they are consistent for sure. They averaged 252.9 once sized and lubed, most actually are this weight. I cast them with an alloy at 2.2 tin, 2 antimony, a touch of arsenic, and the rest lead; a coww mix + lead + solder. Water dropped them to bring up the hardness, as I want these to hit magnum velocity.
Wow this Keith bullet is a beast! I can't wait to load some up and try them.out. I will be loading ladders with 2400 and cci300 as well as h110 with win mag primers. This boolit looks like it will topple a freight train!!!!
I liked the way it looks so much I also procured a mold of this design with a gas check cut. Of course from a member here.
Slow going for certain with a single drop, but they are consistent for sure. They averaged 252.9 once sized and lubed, most actually are this weight. I cast them with an alloy at 2.2 tin, 2 antimony, a touch of arsenic, and the rest lead; a coww mix + lead + solder. Water dropped them to bring up the hardness, as I want these to hit magnum velocity.
Wow this Keith bullet is a beast! I can't wait to load some up and try them.out. I will be loading ladders with 2400 and cci300 as well as h110 with win mag primers. This boolit looks like it will topple a freight train!!!!
I liked the way it looks so much I also procured a mold of this design with a gas check cut. Of course from a member here.