Boolit diameter over bore- how big is too big?

[mattri]

I know this has been touched on before but wanted to revisit.

Slugged my new 350 Legend barrel and it came out right at .355.

We normally size our bullets 1/2thous over so we're right in the .357 range-but.. lots of very interesting projectiles in the .358 range.

Presupposing no chambering issues could it be reasonable to run a .358 pill?

[ACC]

That is what I would do if I had to. But .356 would be better for your .355 bore.

ACC

[mehavey]

If you're talking cast, and if it will chamber reliably (take care that the nose profile/diameter doesn't jam in the short freebore), work the load up for it at 357-358/

http://castboolits.gunloads.com/showthread.php?395190-350-legend-advice&p=4816659&viewfull=1#post4816659

http://castboolits.gunloads.com/showthread.php?395190-350-legend-advice&p=4816964&viewfull=1#post4816964

https://thefiringline.com/forums/showpost.php?p=6776578&postcount=283

[Rcmaveric]

Haven't reloaded for 350 legend. I size to throat diameter or the biggest that will chamber. So too big is one that won't chamber.

Seating jammed into the lands can really changes things though so I don't do that.

Sent from my SM-N970U using Tapatalk

[mattri]

Think I'll pick up a sizer die in .357 and start there.