Mp mold parts

[DirtyDusty]

Does anyone happen to know what size the clips go on the hollow point pins? Need to get some spares

[USSR]

5/32 - https://www.fastenal.com/products/details/68071.

Don

[AnthonyB]

I only “need” one clip per each set of pins and have a lifetime supply from the spares MP sends with all his moulds. Send me a PM and I’ll mail you a few if the ones listed earlier don’t work out.
Tony

[DirtyDusty]

I only “need” one clip per each set of pins and have a lifetime supply from the spares MP sends with all his moulds. Send me a PM and I’ll mail you a few if the ones listed earlier don’t work out.
Tony
I am going to order a pack first, thanks for the offer. I just received my mold earlier this week. It only cane with 6 clips and no set screw. Do you, by chance, have the size for the set screw that holds the sprue plate screw in place?

[white eagle]

Did your mold get held up in customs?
If they got it and opened it they probably lost these parts
Miha is real good about sending those extra parts

[John J]

Greetings

The E-clip size is 3.2 x 0.6 mm and the size of the set screw is M4x4 DIN913 (pitch is 0,7mm) copied from M&Ps website

Hope this helps

John J