View Full Version : MP Mold #4 Buck
ChuckJaxFL
10-15-2020, 10:56 AM
I don’t know how to start a group buy. Or honcho one once started. I don’t want to undertake the burden of learning and keeping up with one (it seems like PITA, so I’m very grateful for those of you willing to do it!!)
I do, however, want a #4 buck from MP. Am I alone?
Sent from my iPhone using Tapatalk
nhyrum
10-15-2020, 12:06 PM
He made buck moulds a bit ago. I got a 000. I don't know if they went down to #4 though.
This is really all it takes to "start" a group buy. One of the mods will usually come in and run it, or once this gets enough traction, they'll make a new post with all the details
Sent from my SM-G975U using Tapatalk
Texas Gun
10-15-2020, 12:57 PM
I need a 00 and #4 buck mold
semtav
10-15-2020, 01:16 PM
I'd be up for a # 4 mould
Texas Gun
10-15-2020, 02:03 PM
Do they do single rows or Multi Rows like the lee buck mold
Gamsek
10-15-2020, 03:19 PM
https://uploads.tapatalk-cdn.com/20201015/88df7806b743ab527149b8be04f2d9d0.jpg
They look like that, MP made .310”, .320” and .330”, and .360”. I have .310 and .320. Very easy casting.
ChuckJaxFL
10-15-2020, 03:38 PM
I’m glad to see some immediate interest!
MP has .310, .320, & .330 on his site, for those looking.
I have the .310 and it is, like all of my MP molds, very easy to cast with. Now I just want a #4 to go with it.
Sent from my iPhone using Tapatalk
Texas Gun
10-23-2020, 02:04 AM
Looks like a Lee blank But with all that open mold space underneath you think they do a second or third row Or maybe a different size on the other side so you flip it over
semtav
01-04-2021, 09:54 PM
Interest seems to have waned, but if we could get someone to make one like Cap'n Morgan made, i sure would get a couple.
http://castboolits.gunloads.com/showthread.php?266363-4-buck-cluster-or-bulk-mold
ChuckJaxFL
01-04-2021, 10:19 PM
Interest seems to have waned, but if we could get someone to make one like Cap'n Morgan made, i sure would get a couple.
http://castboolits.gunloads.com/showthread.php?266363-4-buck-cluster-or-bulk-mold
Since this post, I’ve actually picked up a Lee 18 cavity. After using it, I can’t imagine trying to use a six cavity, like my MP .310 mold. I’d have to smoke some crack to move fast enough to keep it warm.
I’d be ‘in’ for one as in that thread.
Sent from my iPhone using Tapatalk
Gator 45/70
01-05-2021, 12:18 AM
Had an old friend whose getting out of the casting hobby pass this on to me 00 and #4
ChuckJaxFL
01-05-2021, 07:19 PM
For what it’s worth, I also have a Marty’s Arms mold for #1 buck with which I am extremely pleased.
If his #4 mold, or his combo 4 buck/00 buck mold are as good, I’d expect them to be viable alternatives.
Sent from my iPhone using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.