What firearms are on your wish list????

[abunaitoo]

I know it changed from time to time, but some are forever.
Right now, mines is...........
Westley Richards Monkey Tail rifle.
577-450 Martini Henry rifle
Swiss Mannlicher Model 1893 Carbine
Mannlicher Model 1886
Mannlicher M1888
Anschütz Fortner is a straight-pull action biathlon rifle
Mossberg Model "L"
Dardick revolver

[Went2kck]

6.5x55 swed mouser and a lever action 45-70

[KMac]

I recently acquired one of my holy grail guns, a JM stamped 1895 Cowboy. But I still want a 45-70 Rolling Block and a Sharps 45-70.


Sent from my iPhone using Tapatalk

[dangitgriff]

.327 FedMag lever gun and a Single-7 to match.

[William Yanda]

Something from Camp Perry or Ala., a pistol caliber carbine, and a ghost gun.

[GhostHawk]

I let my step daughter talk me out of my old Heritage Rough Rider in .22lr/.22mag. Now it was no great shakes of a pistol in .22lr. But 20 years after buying it I discovered that it was a tack driver in .22mag.

And I'm missing it. Problem is I want adjustable sights for it. And Heritage appears to have discontinued their 2 models they made in .22mag with adjustable sights.

I could go to Ruger NM single six. But I could buy 3 or 4 of the Heritage for the price of a Ruger.

I also would not mind finding a Rolling Block in .22mag or .32sw long that will shoot close to MOA or minute of a squirrels ear.

[StuBach]

Only one for me that stays consistent is the Mateba Autorevolver in 357 (preferably) or 44. Always been intrigued by the unique design and would love to have one in the safe.

An original Winchester 52 sporter would also be up there in desire to put next to the reproduction sporter and my target Pre-A and D models.

[762sultan]

I want a 480 Ruger in a lever action. I have e-mailed Henry several times and they don't seem interested. Rossi has made a few but they are not in production in that caliber anymore. Maybe Ruger will be interested after they get Marlin up and running.

[monadnock#5]

There's a YouTuber with the handle .22 Plinkster who took a Ruger Charger and gave it the following mods: folding brace; Volquartzen 6" carbon fiber barrel and their competition bolt; reddot sight and last but not least a Franklin Armory binary trigger. This has captured my imagination.

[Shawlerbrook]

A stainless steel Rossi 357 with a 16” bbl. and an original Winchester 1895 in 303 Brit.

[jdfoxinc]

A Springfield 01.as issued.

[Froogal]

A 12 gauge side by side coach gun with rabbit ears, maybe a 9mm carbine but that is not at the top of the list, and possibly a lever action 44-40.

[JoeJames]

Something that has never, as far as I can tell, ever made it to the Arkansas; a S&W 624 4".

[JonB_in_Glencoe]

I have repeated said, I'll never buy another 44 mag.
BUT, if I were to find one of the new Henry's with fast twist rifled barrel, I'd probably fork over the Benjamins.

[bakerjw]

NONE... NONE AT ALL....
That is my wife speaking. I mentioned the possibility of picking up another 40S&W due to the large amount of loads that I have for them and I was told... "NO MORE GUNS"....
I asked, "Even for Elia?" Elia is our 5 year old granddaughter. I was informed that Elia does not need a handgun and NO I cannot keep it for her until she gets old enough...

But... I'd love a Judge 45LC/.410
And an SCCY 9mm
And a Baby Desert Eagle in 40S&W.

[rockrat]

Maybe a Gatling Gun in 38 special, 44 special, 45 acp, 38-55 or 45-70
Levergun in 327 fed. and a blackhawk or single seven in the same caliber
S&W 29 44mag Silhouette model to replace the one that blew up!!!
Ruger Hawkeye in 256 win mag to shoot, not collect.

[Ickisrulz]

An English double rifle in a Nitro Express cartridge. It will never, ever happen. I have more than enough guns and probably will not buy anymore. Well, if Ruger comes out with a GP in 41 mag or special I will buy one.

[dangitgriff]

.327 FedMag lever gun and a Single-7 to match.

...and a Ruger GP100 in .41 mag and a Coonan .357 auto and a Ruger PCC in 9mm and a Marlin .375 Winchester and...[emoji1783]

[Kylongrifle32]

A Sharps and a vintage Winchester 1885 both in 38-55 win. Probably would settle on any Rolling block or Falling block rifle in 38-55 or 40-65

[harm]

I'd really like to get back some of the ones I've sold and traded off, first.

The Stoeger Coach gun in 12ga I never shot, the Beretta Neos 6" .22 for plinking, and absolutely the Ruger M77 in 7.62x39 with the boat paddle stock.. my first JC Higgins model 20, the Mossberg that I thought could replace it.. this list could get long, without even looking forward.

[poppy42]

The list is way to long! Anybody know a rich guy that wants to adopt an old dude do ya?? :D:D

[RU shooter]

A nice M1 garand to replace the one I had to sell when I was young and poor .

[bedbugbilly]

A Spencer carbine in 45 Colt

A Uberti 1873 Winchester in 45 Colt

A Henry BB steel in 327

Hmmm . . just noticed . . . all lever guns . . .

[marlin39a]

Ruger Single Six, 32 H&R Magnum, 6.5”.

[popper]

Rockrat - outfit up north can't keep up with demand for 9mm gattling guns. They also make RB actions.

[10-x]

Sweed K with 100,OOO rnds of ammo....

[Chad5005]

its been a barrett 50 cal for many years but with the price of ammo or even reloading for it ive decided id rather have a nice ar 10 in 308

[DougGuy]

A blued 5 shot Bowen 50 special on a color case new model flattop frame, 5" barrel with fossilized mammoth ivory grips.

[Shawlerbrook]

How about a “real” Marlin 1894 in 22 Hornet ( Ruger, are you listening?)

[osteodoc08]

I want a 480 Ruger in a lever action. I have e-mailed Henry several times and they don't seem interested. Rossi has made a few but they are not in production in that caliber anymore. Maybe Ruger will be interested after they get Marlin up and running.

I’ve though about breaking down and buying one from Big Horn Armory but they aren’t exactly giving them away.

I’ve also inquired Marlin and Henry

[osteodoc08]

I’d really like one of Clements full on customs with CCH from Turnbull and deep gloss blue in 480 Ruger with real ivory grips shaped like Elmers #5 grip. Probably 5.5” octagonal barrel. The 480 Ruger for me is the epitome of the capable, packable, manageable big bore.

[fcvan]

Single shot in 38-40 WCF to go with my Vaquero, an H&R 1871 in the Classic Carbine style like the 20" 45 Colt they did a decade or so ago. I already have the Vaquero for the 45 Handi, took a while to find the OM Vaquero after I scored the carbine. Now I need a 38-40, maybe a falling block like the one a member here, made in British Columbia. I guess I need a mill and lathe.

[Texas Gun]

AR10 and a M14 308 or a M1 30-06

[rking22]

Nice English rook rifle, original and in good shape. They are out there, just can’t handle the $$$$&. Perhaps a retirement present to me???

[GregLaROCHE]

8mm French Gras in mint condition and a .45/110 replica like in Quigly Down Under.

[dverna]

My wish list:

An accurate (2 MOA) .357 bolt action with 16" barrel and laminated stock.
Two more .30 Carbines. M1's of course!!!

[jimlj]

Maybe a Gatling Gun in 38 special, 44 special, 45 acp, 38-55 or 45-70

Did you see Will Dabbs article in the August Guns magazine?
Tippman Armory 9mm Gatling Gun. Definitely on my wish list.
Winchester 62 or good working clone.

[flint45]

No.1 Smith & Wesson registered magnum with a 3 1/2 inch barrel and A 5inch barreled one also. British single shot in 450/400 . Winchester model 52

[elmacgyver0]

I know it changed from time to time, but some are forever.
Right now, mines is...........
Westley Richards Monkey Tail rifle.
577-450 Martini Henry rifle
Swiss Mannlicher Model 1893 Carbine
Mannlicher Model 1886
Mannlicher M1888
Anschütz Fortner is a straight-pull action biathlon rifle
Mossberg Model "L"
Dardick revolver

My Dear Friend,
A simple answer.
Everything I don't have and maybe a few that I already do have!

[GregLaROCHE]

Did you see Will Dabbs article in the August Guns magazine?
Tippman Armory 9mm Gatling Gun. Definitely on my wish list.
Winchester 62 or good working clone.

That Tippman Armory 9mm Gatling Gun is pretty pricey.

[rockrat]

Yeah, I came REALLY close to ordering one, but with a 15 round mag limit here, wouldn't be much fun. Just get started and have to change mags.

[Pete44mag]

A mint condition Model 657, no dash, Smith and Wesson .41 Magnum with a 4" barrel.

[DocSavage]

Broomhandie Mauser 9mm or 45 acp
Webley Fosberry 45 auto revolver
Gatling Gun any caliber
45/70 Double rifle
22 lr 1874 Sharps replica with Malcoim style telescopic sight.
Rolling block in 22 lr

[jd9770]

A .455 Webley Mk. I

[Bazoo]

Well,

Winchester 71 348
Marlin 1894c
Marlin 39 or 1897 cowboy
Ruger 1 in maybe 270, or similar, maybe 280rem
Marlin 1895 45-70,
Ruger new model blackhawk 357magnum
Sears Zoli O/U 12 gauge
Ruger 77 30-06
NAA mini 22LR
Ruger Redhawk 44 magnum 4"
Marlin 1894 44 mag w/ custom barrel so I can run .430 bullets
Bushmaster (original) A2 rifle hbar
Mini 14 SS wood stock
SXS12 muzzleloading shotgun
Lyman trade rifle 50
M1 Garand
Springfield Armory Range Officer 45acp
Smith 642
Ruger Blackhawk 44 special
Remington 41 targetmaster
Marlin 881
NEF handi in 357 magnum and 44 magnum and 30-30
Stainless Marlin 336 30-30
Winchester 95 probably 30/40

Pretty much covers what I'm into.

[brewer12345]

At the moment, not a whole lot. A Ruger or Smith 44 Mag with a 6 inch barrel.

[rbuck351]

A M92 Win in 256Win and yeah I know they never made one so I'm going to make my own. Also want a 1878 Browning in 7mm Mauser.

[Walks]

Not a COLT SAA in the bunch.

Colt New Service Target in .44Spl w 7 1/2" bbl.
Browning Safari in .300 H&H with a Lyman 4X Challenger Scope.
Browning Superposed Broadway Trap 32" bbl's.
Browning Superposed 4 gauge Skeet Set.
Smith & Wesson Pre-War .357Mag 8 3/4" bbl
Colt Pre-Series 70 Colt Cup
Ruger OM Flat top 4 5/8" bbl
Colt Python 6" bbl 1st year production.
Winchester 71 Rifle & Carbine
Savage 99's in .358Win, 250-3000 & .300Sav
Colt SAA's in .38WCF with 4 3/4" , 5 1/2" & 7 1/2" bbl's.
Winchester 1892 Rifle in .38WCF with 26" bbl & shotgun buttstock.

That's enough for now

[Divil]

CZ 75b compact
Colt New Service in .357 or .38 SPECIAL
Ruger LCR Talo Silver limited edition in .38 Special
Retro Build loosely copying M16a1 with mostly Brownells parts
Kimber Pro II 4 inch barreled 1911 9mm in stainless or two tone
Ruger 77/357
Dan Wesson .357 mag or .357 max
GP-100 in .357 x 2
Semi Auto Shotgun
Ruger M77 in 6.5cm or .308
Over Under Shotgun
Sig P239 or P232
Ruger Birds Head .357
Ruger Vaquero .357 or suitable copy single action .357 equipped with a transfer bar safety
Tippman Armory remington rolling block in .357
Maybe a few others

[lightman]

My list has gotten shorter as I've aged but there are still a few. Not in any particular order;

S&W M-27 pinned and recessed with a 3-1/2 inch barrel
Colt 70 series blue Gold Cup
Colt Stainless Gold Cup in 38 Super ( I've only ever seen one)
A custom 1911 from Nighthawk or Guncrafter
Remington 40X

I will buy any one of these whenever I see one at an affordable price except for the custom 1911. At my age I just don't see having a $4500 1911.

[Slugster]

I would like to have the Savage .410 single shot my father gave me and the Winchester 190 .22 Rifle from my mother. Stolen. Long ago.

Not a fan of all the new "plastijunk" the manufacturers are pushing these days. I'm a blue steel and walnut kind of guy. I also own these types of firearms, but they just don't have the look and feel of the older firearms. One man's opinion.

[Mk42gunner]

A Colt Woodsman- 6" Second or Third Model, the light barrel version.
A Remington No. 2 Rolling Block in a small centerfire, possibly the Uberti repro in .357 or .22 Hornet.
A good tube fed .22 bolt action from the days of blue steel and black walnut.

That will do for starters,

Robert

[Mike in MD]

Just looking for one right now. Marlin 41 mag.

[Targa]

7.5” Colt SAA in .45 Colt

[JDs1911]

Just looking for one right now. Marlin 41 mag.

Same here, a Marlin 1894FG. I found a couple but they are a little pricey.

[Gtrubicon]

A Springfield operator, half tac rail, my buddy bought one and it’s a lot of gun for the money. Then they were not approved for sale in California, unless used. 45 acp of course!

[firefly1957]

I really have all that I need but the other day I saw a old article on the Taurus Raging Hornet that got my curiosity up!

If we are just talking fantasy a quality double rifle in a big caliber ......

[dkonrai]

Ok I'll play.
Top of the list.

Luger, 9mm, american eagle fat barrel. Passed on one two years ago and it still haunts me.

Winchester 1892. 2520 chambered in 357. To replace the three that were stolen many years ago.

Small list. Small goals.[emoji106]


Sent from my moto g(7) using Tapatalk

[Mica_Hiebert]

Freedom arms 475 linebaugh

[Wheelgun]

Right now...

S&W model 16 in 32 h&r Mag.
Marlin ‘94 in 32 h&r Mag.
Uberti Win 1873 in 32-20 & 44-40
Uberti SAA in 32-20 & 44-40 5.5” & 7.5”.
S&W 625
S&W 25 in 45 colt
S&W 22-4 because I stupidly sold mine!!

And a couple more S&W 38/44 Heavy Duty’s!!

[2A-Jay]

I have my '03 Springfield, now there are 2 left on my short term wish list, An M1 Garand an M1 Carbine. I want shooters not Safe Queens.

[samari46]

Well since I'm kinda sorta a 32-20 lover maybe I'll send one of my 22rf martinis out to John Taylor and have him stick a faster than normal twist TJ's liner in it. Already have a center fire complete trigger group and have it drilled and tapped for a scope. that would satisfy my wants. Frank

[centershot]

For me, it was an Ithaca SxS. That dream was fulfilled yesterday when a 1914 vintage Model 1-1/2 12 gauge came home with me, just in time for turkey season!

[Idaho45guy]

Gun I'd like to buy someday is a S&W Performance Center 627. I don't own a revolver and I figure if I ended up getting another one, it might as well be a really cool one...

268745

Gun I will buy in the next year or so is a Ruger American Predator in .308 with the 18" barrel. Would like a handy little elk rifle for brush.

The gun I will get someday is my dad's Jack O'Connor tribute rifle built by Al Biesen in 1971 for $764. Pre-'64 Model 70 in .270 and used to take his first Grand Slam.

I have a picture of him and the rifle on my desk.

268746

[RKJ]

Ruger 77RSI in 7-08
Winchester (USRAC) M70 Featherweight in 308,6.5CM or 7-08
S&W 29/629 3" 44 Mag
S&W 29/629 4" 44 Mag I'd prefer the 3" but wouldn't turn down one in 4"
S&W 25 4" 45 Colt (I've got the MG but prefer the standard barrel)
Colt SS Commander in 45 ACP, 38 Super and Delta Elite 10MM
I'm sure there are many more than I can't think of but these would take care of me for awhile. :)

[RC46]

All of 'em. No seriously, it would be a Marlin .41 mag Lever Gun. Great cal. and rifle and I see a few on others lists, so must be popular. Maybe Ruger will bring it back, then it will match up to my Blackhawk.

[mike britton]

Mine is pretty simple....I would like a really nice late NEF Handi-Rifle in .30-30

[Geezer in NH]

Brass Maxim in 7.62x54R, with at least 15 belts and loader.

[BrutalAB]

A Browning BLR in .358
Would prefer a Henry Long Ranger in .358 but not an option they offer.
The Coonan 357 has been in my eyes for years as well.

But tbh ive already got guns that can fill their roles, so its just wants rather than needs.

I do need a 44 mag though, cause i got a set of lyman dies and a good bit of brass in a lot i purchased a few years ago.

[monkey wrangler]

The list would be too long to write out, so I will just put the top one out there.

Thompson sub machine gun in full auto. That would keep me busy reloading for sure.

[VariableRecall]

Considering that I've recently got a Model 10 as the first firearm in my collection, in the future, it would be very interesting to get a Model 10 Victory, with the lanyard Loop and the smoother grips. Obviously it's going to be a lot more difficult to get one in that configuration, and there's no telling how much it would be beat up passed from force to force, but it would be a very interesting thing to add to my collection in the future.

Also I've got on my wish-list in the next 4 years or so to get some sort of AR platform in .556. I think the best part about that is I can achieve it one little piece at a time, and get what will suit my needs without having to compromise. That is, if nothing else happens to online gun sales if Sleepy Joe weasels his way to the top by some infernal means.

[Three44s]

Irrespective of Hidden Biden, Inslie and Fergesun are enough of a threat to guns to make them rattle enough to shake the teeth fall out of a healthy sharks head!

Three44s

[rking22]

Funny how things that were never really on your radar can become highly interesting, all a sudden. I have always been a pump gun guy and little interest in autos. Guy showed up Saturday with a 11-48 skeet gun in 410, never knew I wanted one till I saw it! Sometimes things work out, he brought it to sell, I was able to help him out.

[curdog]

I would love to have a m1 carbine to play around with. i have a bunch of 296 powder that needs burnt up..............Curdog

[2A-Jay]

I made the leap yesterday and put $225 down on a Buffalo Bill commorative (SP) model 94. This has been and will continue to be a shooter. Total Price is $50 a full box of .30-30 included. This is a Private Party Sale.

[Texas by God]

A Tikka T1 .17HMR, a Ruger 4-5/8” SSM .32 H&R, a Marlin Cowboy 1895 45-70, another Ballester Molina, and another M1 Carbine. The list is subject to change, of course.

[Firebricker]

As far as handguns mine would be a Bren 10 or Randall left handed 1911.
Rifle would be a 30/40 Krag.
As far as a total novelty gun. I would go for one of the miniature Browning machine guns in .22 mag. FB

[Pinger87]

CZ Shadow II, Barrett MRAD, Beretta Imperiale Monte Carlo

[tdoor4570]

never know what is on my list until I see it on the rack or in the showcase.

[mongo40]

My next purchase or trade will be a Sharps Carbine in 50-70 or 45-70.

[Froogal]

Bought one that was not even on my list. Didn't even know I wanted it, but it was just too cute so it came home with me. Cimarron .45 Colt New Sheriff, 3 1/2" barrel. Haven't even shot it. Yet.

[memtb]

A “slight divergence” from your question......to use the ones that I have, a lot more! memtb

[shdwlkr]

model 1892 in .218 bee with 26 inch barrel and full length mag tube brand new manufacture