Who makes a Wad Cutter mold in 45 cal?

[dangerranger]

I'm looking at a Snub revolver in 45 Colt. And I'd like a WC bullet for it. I have round nose, and TC molds.
I did a couple of searches and have found nothing. Any ideas?

[BK7saum]

MP made a run of HBWC / solid wadcutter a while back in various calibers. One was the 45. Not sure how many were made. I don't see them come up for sale.

[glaciers]

Try NOE, I picked one up there a while back, 454 273 wad cutter. Have not had time to cast with it yet, but, looks nice.. There are 3 different weights listed, mine is the heaviest.

[mehavey]

Take your pick. . . .
http://www.accuratemolds.com/bullet_detail.php?bullet=45-200WT-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-220V-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-220W-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-225W-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-230W-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-231W-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-255W-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-260Z-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-270Z-D.png

[Harter66]

Mountain Molds if all else fails

[ABJ]

For a light weight, look at accurate 45-170v. Might be a little less recoil in a 2 inch gun.
Tony

[Reverend Recoil]

Keep it simple. Load simi-wadcutter backwards and you will have a boat-tail wadcutter.

[bigboredad]

Accurate molds makes one and if you don't like it you can change to what you do like. NOE makes at least one and arsenal mold makes a couple as well

Sent from my SM-T377V using Tapatalk

[dangerranger]

Take your pick. . . .
http://www.accuratemolds.com/bullet_detail.php?bullet=45-200WT-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-220V-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-220W-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-225W-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-230W-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-231W-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-255W-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-260Z-D.png

http://www.accuratemolds.com/bullet_detail.php?bullet=45-270Z-D.png

This looks exactly like what I want!
http://www.accuratemolds.com/bullet_detail.php?bullet=45-225W-D.png
And thank you for putting it up this way. I would never have found it in Accurate's site! DR

[cwlongshot]

I picked up a Arsenal 250g FWC. MOLD.

Its a dandy giving a beautiful wad cutter profile!!

http://arsenalmolds.com/index.php?route=product/product&product_id=126

CW

[fredj338]

I am a big Accurate Molds fan. Great cs & quality at a fair price. Dont like what is in his catalog, just tell Tom what you want & he will make it.

[MUSTANG]

I have a 6 cavity Lee .45 Wadcutter (Yes Wadcutter - not a Semi-Wadcutter). Think I bought i back in 1977. Have not seen another one in many years.

[Burnt Fingers]

Lyman 452389.

[Gamsek]

https://www.mp-molds.com/product/mp-452-hollow-base-wad-cutter-4-cavity-mold/

Hollow base WC, 235grs with HB and 274grs in solid - and you can make both with one mould.