M&P 32cal mold

[John J]

Greetings

Im trying to find out how long the boolit is from top to bottom

if any one has one of the molds could let me know.

I have sent M&P emails but no reply as of yet

www.mp-molds.com/product/32-wad-cutter-8-cavity-aluminum-mold/

Thank you

John J

[rking22]

I believe I have one, I can’t measure till tomorrow morning.

[Green Frog]

My shooting buddy Dale53 has that mould and I love the bullets from it; that’s the good news. The bad news is that Dale informs me he dislikes casting with it because the design of the lube grooves causes the bullets to stick in the mould, making production slower than expected. He really has to work at it to get the otherwise nice bullets out, so getting a good rhythm going is difficult. Once the bullets hit the mat and I can get them lubed in Dale’s Star Sizer, I really, really like them (but I didn’t have to do the hard part!) :mrgreen:

Froggie

[Wheelguns 1961]

I have an arsenal mold that casts the same bullet as far as I can tell. It measures .517”.