PDA

View Full Version : Anyone got a favorite .41Mag load with Herco?



ddixie884
09-03-2020, 12:58 AM
I got 3lbs from Grafs the other day and I'm looking for good uses. Please share..........

RJM52
09-03-2020, 06:28 AM
Have never used it myself but over on LoadData.com they have loads from the Lee Reloading Manual...

200 grain Jacketed...probably Speer SWC-HP
8.9 1117
10.1...1320

210 Jacketed....probably Remington SP
9.4.....1211
10.3....1320

220 Jacketed....probably Speer SWC-SP
8.2....1088
9.3....1220

Ken Waters Pet Poads:

Wt. Bullet Powder Manufacturer Powder Charge Velocity (FPS)
200 Harvey J-J Alliant Herco 11.0 1,269
Remarks: case: R-P; primer: CCI 350; O.A. Ctg. Lgt.: 1.62; case expansion: normal; accurate

210 Lyman 41028 R.N. Alliant Herco 11.0 1,301
Remarks: case: R-P; primer: R 2 1/2; O.A. Ctg. Lgt.: 1.57; case expansion: normal; very accurate

210 W-W JSP Alliant Herco 11.0 1,278
Remarks: case: R-P; primer: F 150; O.A. Ctg. Lgt.: 1.58; case expansion: moderate

210 Hornady JHP Alliant Herco 11.0 1,268
Remarks: case: R-P; primer: F 150; O.A. Ctg. Lgt.: 1.58; case expansion: normal; very accurate

210 R-P Lead SWC Alliant Herco 10.0 1,158

Gives you a starting point...Bob

Lloyd Smale
09-03-2020, 07:47 AM
I run 8.5 grains with 225s and 8.5 will bullets like the lbt 250 lfngc. Herco is a great powder. Every bit as good as unique. In fact if anything ive had better luck with it with accuracy in the 41s 44s and 45s. Never could figure why its been the stepchild in the alliant powder line up. Sure its a bit more dirty burning but if you are a caster and have used lubed cast bullets youd know that any load will make your gun dirty. If you use pc most of the dirtiness of herco isnt an issue anymore.

Rodfac
09-03-2020, 09:37 AM
Starline .41 Mag Brass: Win LP prime, 9.0 gr of Herco with RCBS' 41-210 LSWC sized 0.411" gives 1106 fps according to Quick Load in a 4.6" bbl'd Ruger BH. In my guns, this load consistently produces sub-2" groups at 25 yds from a rest.

Same load with Hornady's excellent 210 gr XTP gives a Quick Load estimation of 990 fps with the same accuracy.

Both bullets, will do equally well with 8.0 to 9.0 grain loads with no signs of excess pressure on the case nor primer.

Data source for the JHP is a '92 copy of old Hercules data. Max for a JHP is 10.3 gr of Herco, for 1320 fps & 34,800 psi. Rem 2-1/2, at 1.575" min OAL.

HTH's Rod

ddixie884
09-14-2020, 11:27 PM
I settled on 9gr with a 217gr swcbb and CCi LP primers and the same under 158gr swcbb RP 1 1/2 in .357. I was surprised the same load would work for both. We'll see what BIL thinks about them. Thanx to all that answered and offered data........