300 blk / 130 cast pills

[2manyguns]

hi i looking for some load data for 130 RN in a 300 blk bolt gun with a 1x7 twist i am using 19.7 of lil gun , i would like to burn up some a1680 and i have heard that reloader 7 works but have no info on where to start, any help is appreciated thx

[lar45]

130 BARNES TTSX 17.0 1,704 18.9 1,923 44,632 2.065"
http://www.ramshot.com/wp-content/uploads/2020/08/WesternPowdersHandloadingGuide8.0_WEB.pdf

That might get you close

[cwlongshot]

1680 will work but its better served for 150g PLUS. 296/H110/#9 better for light weights. Yea lil gun too but its never my choice. It burns hot and prone to
Pressure spiking.

CW

[sutherpride59]

My only load data

130grn 22bhn GC projectile sized to .310
Used mystery red lube(Inherited lube)
16 grn H110, seated just above the lube groove, Winchester small primer, converted LC brass.
groupEd .8”@50yards

[Lloyd Smale]

Ive had excellent luck with 19 grains of 110 or 15 grains of aa9. Both loads will shoot under 2moa at a 100 yards for 5 shots in my 16 inch ar or my american. They shoot one inch at 50 with my two ar pistols but with a dot sight i just dont do justice to them at a 100. Mold is the rcbs 130 gas check. Couldnt get me to fire lilgun in any gun anymore. Way to hot burning.

[popper]

17-18gr of 1680 will work (~45k psi), may burn pretty dirty with the 130. 15gr Reloder7 worked OK for me with 145gr PB.