oldhenry
08-31-2020, 11:15 AM
My Hodgdon Reloading annual manual has a separate list of loads for the Meister Boolits LSWC from other LSWC. In all calibers the suggested loads for the Meister boolits are heavier & sometimes use different powders.
What's the difference between the Meister boolits & my 50/50+2% cast that I lube with BAC?
They advertise their boolits as being hard. In my experience proper fit & good lube trumps "hard".
I'm looking for a good .357 Mag. mid range load for the MP-360 "Hammer": mine (not GC) weigh 172 grs. in solid & 158 in wide HP.
They list a max HP-38 load of 5.0 for the 158 gr. LSWC for the non-Meister boolits. I tried this with the Arsenal 162 WFN (mine weigh 161) and also in the 172 gr "Hammer".
The separate Meister Bullet list has some CFE Pistol loads. I'd like to try some beginning with "starting loads" (velocity about same as max HP-38 in the non-Meister list).
Thanks,
Henry
What's the difference between the Meister boolits & my 50/50+2% cast that I lube with BAC?
They advertise their boolits as being hard. In my experience proper fit & good lube trumps "hard".
I'm looking for a good .357 Mag. mid range load for the MP-360 "Hammer": mine (not GC) weigh 172 grs. in solid & 158 in wide HP.
They list a max HP-38 load of 5.0 for the 158 gr. LSWC for the non-Meister boolits. I tried this with the Arsenal 162 WFN (mine weigh 161) and also in the 172 gr "Hammer".
The separate Meister Bullet list has some CFE Pistol loads. I'd like to try some beginning with "starting loads" (velocity about same as max HP-38 in the non-Meister list).
Thanks,
Henry