My app mods

[sagebrush rebel]

I don't know if anyone is interested, but this is what I did to my APP press. I used a block of nylon and drilled holes in it to hold the tubes with a small lip at the bottom. I just set it up for the medium sized tube and the 2 big ones. I have no plans at this time to use the smallest tube. I made it so I can adjust without a wrench. I used carriage bolts in the slots. It is shown using the medium tube and to use the 2 larger tubes, I just flip it over. The larger tubes have about the same OD, so they use the same hole.266715266716

[RedlegEd]

Hi there!
Looks good. You may want to consider posting this on the other Lee APP mod thread here: Modifying the Lee APP. (http://castboolits.gunloads.com/showthread.php?396816-Modifying-the-Lee-APP)
Ed

[Mollyboy]

Is that the Lee roller handle?

[sagebrush rebel]

Yes it is. I love it. In another post I showed that I made my own roller handle, but it made the throw to long. I still have it and if I get some hard to size boolits, I will put it back on for extra leverage.