380 95-100 gn RF question

[Wayne S]

None of the commercial casters only offer RN bullets in the 90-100 gn. range {380}.
Is it because of a feeding problem that no one offers RF bullets ? I think Lee is the only mold maker that offers a 95 gn RF mold.
I did see some Buffalo Bore 100 gn. RF +P bullets at my local gun shop, but Buffalo Bore wouldn't answer my question about the mold they use.
Seams 380 shooters are stuck with thimble looking bullets.

[redhawk0]

I use Lee's 102 gr RN in my 380. It eats them like candy. I don't see any cycling/feeding issues at all.

redhawk

[BigAlofPa.]

SNS casting has them, I use their boolits.

[jcren]

Accurate makes several 380 molds, and arsenal has a tc style that I have been looking at. I have the lee 95 rf and powder coat em. Do have to seat prety short to feed reliably on some of my guns.

[onelight]

I have used the Lee 105 grain swc in 380.

[redhawk0]

Forum member CASTING MACHINE is a Vendor Sponsor in this forum. He sells .356" 95 gr RN. You might want to make contact.

redhawk

[tankgunner59]

I load the Lee 356-95-RF for my wife's Ruger LCP and it feeds and shoots great. I have to use the data for RN sometimes and the only adjustment I have to make is on the OAL. I adjust it a little shorter for the RF bullet.

[Outpost75]

I use Accurate 35-120H in the Ruger LCP, SIG P230 and Beretta M1934 with 2.5 grains of Bullseye. Feeds well in all and is more effective than the light LRN bullets.

266236266237

[onelight]

We may be misunderstanding your question . Do you want round nose RN or round nose flat point RNFP ? are you looking for a mold ? Or commercial cast bullets ?

[CASTING MACHINE]

380 95 gr rn. Very common bullet. 266240 These are coated with hitec sized .356.

[mattw]

I use the Lyman 358242 light and heavy versions and an Arsenal 123 TC for my 380.

[Wayne S]

We may be misunderstanding your question . Do you want round nose RN or round nose flat point RNFP ? are you looking for a mold ? Or commercial cast bullets ?
https://www.midsouthshooterssupply.com/item/0000690672/6-cavity-mold-tl356-95-rf
A commercial caster to see how they function. and YES RF = RNFP . I figured since Lee referred to them as RF there wouldn't be any confusion on the design I asked about.

[Wayne S]

sns casting has them, i use their boolits.

they only have round nose, i was asking about rf or rnfp

[BigAlofPa.]

Ok sorry for the confusion, I miss read though you were after RN, How about these? There 105 grain though,
https://bayoubullets.net/380-auto-105-gr-fp/