PDA

View Full Version : MP 7mm Silhouette- Interest?



KVO
08-09-2020, 02:06 PM
Mihec has absolutely zero 7mm designs available. Any interest in a new 7mm design based on a scaled down 311-180 Silhouette? This bullet has given me good accuracy in a variety of guns and the tapered nose fits many different throat configurations well. Also works well lubed or PC. Most of the available semi-custom 7mm designs are either WFN or the odd Loverin, or bore riders that are problematic with PC. Accurate Molds will not cut a GC 7mm. I'm envisioning something that weighs in between 155-165gr and would fit in a 7mm-08. Any interest?

nhyrum
08-09-2020, 02:18 PM
I think that bullet would be a great one. With no 7mm's out there, I think there's a lot of different applications this bullet could have. It's too bad I don't have a 7mm. But I think, and hope, this will take off.

Sent from my SM-G975U using Tapatalk

MUSTANG
08-09-2020, 02:22 PM
I would be interested in one of these in 7mm.

Gamsek
08-09-2020, 03:39 PM
Bobby Kell Jr (aka Boolitdesigner / 45 2.1 ) already got throat dimensions from few modern 7mm rifles so he can design the best possible. Following his directions I made 3 samples from Heym 7x57R, Blaser R95 7x64 and from 7mm Rem.Mag Steyr Manlicher Luxus. Samples were delivered to Miha and he sent them to Boolitdesigner, he just told me he is working on design.

Since I own 4 rifles in various 7mm (also Ferlach Bock-driling in 7x65R/16/22WMR I have special interest in this 7mm bullet to be machined fast.

I think Miha should make a Hunting version for 7mm with FP and HP (150-160grs) and also 7 Sil version with smaller HP (160-170grs...). But this only what I think, cannot see in Miha’s and Bobby’s thoughts.

I have 5 of his HP/FP moulds in 311”-312”, but I really need a nice 7mm too.
https://uploads.tapatalk-cdn.com/20200809/a87a82ed437767775b0d6060fd3b37ce.jpg
https://uploads.tapatalk-cdn.com/20200809/7ce57dd5eabde4b8d9a211a408c4c070.jpg

KVO
08-09-2020, 04:22 PM
Wow, I'm surprised how fast this is picking up steam! Like Gamsek I'd be for a heavier 7 Sil and and a HP option would be great. I have the NOE 150 Hunter and it looks great but could never get it to shoot to my satisfaction. I would think 7mm will be a more easily organized run with less custom diameter requests as most guns (outside of 7x57 Remington Rolling Blocks) should have fairly consistent 0.284-0.285" groove dimensions.

If samples and throat dimensions are being spec'd, we may need a honcho soon?

Gamsek
08-09-2020, 04:37 PM
Wow, I'm surprised how fast this is picking up steam! Like Gamsek I'd be for a heavier 7 Sil and and a HP option would be great. I have the NOE 150 Hunter and it looks great but could never get it to shoot to my satisfaction. I would think 7mm will be a more easily organized run with less custom diameter requests as most guns (outside of 7x57 Remington Rolling Blocks) should have fairly consistent 0.284-0.285" groove dimensions.

If samples and throat dimensions are being spec'd, we may need a honcho soon?

As soon as Miha gets design we can start rolling. We don’t know yet how it will look and what weight.

I know Miha has interest to make other rifle calibers since he resolved problems with cherries for longer skinnier bullets.

After I hear from Boolitdesigner I will talk to Miha to find a honcho and start rolling.

zymguy
09-07-2020, 02:37 PM
I would be in for a 7 mm


Sent from my iPhone using Tapatalk

Spillway
09-14-2020, 10:14 PM
What he said "I'm envisioning something that weighs in between 155-165gr and would fit in a 7mm-08." count me in.

45workhorse
09-14-2020, 10:43 PM
I'd be interested in one for my 7mm BR!

I just started working up some cast with a Noe mold, I got from Dimner, something a little heavier, hollow pointed and gas checked. The Noe mold is aluminum, and throws 134 grain, flat nose boolit, so far it is shooting better than I can hold it!

Can't have to many molds!!!

DanInCt
11-14-2020, 10:26 AM
I have interest in 7mm, i pinged him a while ago but i guess he is super busy. I would like to feed my 7mm mauser . A nice pinned mold would be great