Naphtali
07-31-2020, 03:29 PM
Several years ago I commissioned a purported lever action custom gunsmith to render my Rossi 92 stainless steel 454 Casull carbine into a half pistol grip 45 Colt rifle ― a Winchester 92 rifle with shotgun butt. It was, and is, intended to be the other half of my Freedom Arms 97 45 Colt set. The gunsmith was way beyond an unfortunate choice. After filing a complaint with Postal Inspection Service, I repossessed the botched rifle.
***
Okay, to the query. My current gunsmith is booked for several months until my rifle is to be finished. In the meantime he returned it for me to use until he'll get to it. The rifle's receiver and many of action's internal parts have had a black cerakote (spelling??) or similar coating done. Breech bolt and locking lugs are uncoated. I do not know if it's spray-on air dry or bake-on finish. The action is snug-to-tight. I don't know whether shooting ― that is, cycling the action during magazine loading ― will damage tolerances, harming the action.
- Kris Bonner (Accu-Arms, Missoula, MT) intends to strip the coating as part of his job. Can the action be used as-is without excessive wear on action tolerances? If yes, what lubrication will mitigate any excessive wear likelihood?
- If excessive wear would be likely, can I "deal with" this coating while awaiting Kris? I have hand tools, no power equipment or blasting apparatus.
***
Okay, to the query. My current gunsmith is booked for several months until my rifle is to be finished. In the meantime he returned it for me to use until he'll get to it. The rifle's receiver and many of action's internal parts have had a black cerakote (spelling??) or similar coating done. Breech bolt and locking lugs are uncoated. I do not know if it's spray-on air dry or bake-on finish. The action is snug-to-tight. I don't know whether shooting ― that is, cycling the action during magazine loading ― will damage tolerances, harming the action.
- Kris Bonner (Accu-Arms, Missoula, MT) intends to strip the coating as part of his job. Can the action be used as-is without excessive wear on action tolerances? If yes, what lubrication will mitigate any excessive wear likelihood?
- If excessive wear would be likely, can I "deal with" this coating while awaiting Kris? I have hand tools, no power equipment or blasting apparatus.