Walnut Hill Top punch holder dimensions

[Lizard333]

I have a walnut hill press and I can not for life of me cannot find my top punch holder for my press..... I was wondering if anyone can give me the overall length for the punch holder. I also need the overall length for the rod that threads into top punches and the metal bar that acts as a spacer for bottom ejection. I know the thread pitch for the holder, i just need the overall length. I would be forever grateful!! Thanks much in advance!!

Doug

[Lizard333]

https://uploads.tapatalk-cdn.com/20200727/d5b9a57714e9c03f1026aa4476a5c4cf.jpg

[475AR]

Why not just order one?
https://www.rceco.com/catalog/
He says they are a stocked item. (About 1/2 way down the page linked.)

[Lizard333]

I will if I have to do. I have a buddy that is willing to machine one for me, but yes, that is an option.

[475AR]

I have one that I got with a set of used dies but wasn't made by RCE and it works fine. The length of the holder is 4 1/8" the draw screw is 4.5" with a 3/8" spacer. The 2 bars are 1/4" thick by 1/2" wide and 3" long the other bar is 1/4" thick by 3/4" wide and 3" long.265374

[Lizard333]

I have one that I got with a set of used dies but wasn't made by RCE and it works fine. The length of the holder is 4 1/8" the draw screw is 4.5" with a 3/8" spacer. The 2 bars are 1/4" thick by 1/2" wide and 3" long the other bar is 1/4" thick by 3/4" wide and 3" long.265374

Thanks!!!!


Sent from my iPad using Tapatalk Pro