View Full Version : A lot ingredients??!
LAKEMASTER
07-19-2020, 11:46 AM
I came across this at work today. It smells like alox. And looks like it, and feels like it. Yet it's in an spray can265006
Gewehr-Guy
07-19-2020, 01:01 PM
That deserves some further investigation. Does it dry after a light coat?
LAKEMASTER
07-19-2020, 01:17 PM
Yes. And a thick coat is pretty dry, but sticky. Like alox
303Guy
07-19-2020, 05:19 PM
I wonder how it compares with Tectyl 506 corrosion inhibitor? I have considered getting a can and spraying it all out into a container to dry and using it as an ingredient. I read somewhere that the original Alox was used as a corrosion inhibitor as well as a lubricant additive to improve lubricity. The test here would be to apply some to boolits and see how well it lubricates. I might just head down to my local marine store and see if they have the marine one.
Tectyl 506 is a preventative compound for rust prone surfaces providing protection against the damaging effects of moisture, chloride and corrosion.
Could it be the same stuff?
NyFirefighter357
07-19-2020, 06:08 PM
Heres the MSDS for it: http://docs.crcindustries.com/msds/76026E.pdf
John Boy
07-19-2020, 07:30 PM
Looks like nothing more than some paraffins and soft wax
LAKEMASTER
07-19-2020, 07:42 PM
Just sprayed 2 coats on some hunting bullets. Took 5 minutes to dry between each coat.
LAKEMASTER
07-19-2020, 07:44 PM
2 coats, kinda on the heavy side
LAKEMASTER
07-19-2020, 07:45 PM
Going to take a torch to it in a little bit
gwpercle
07-20-2020, 01:08 PM
2 coats, kinda on the heavy side
choot em !
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.