Rcbs 09-115

[krudt]

He
Are there some one who use this bullit. I have some data from a norvigen book who says that the total lengh shoot bee 29.1 mm or 1.146 in. For my it looks wrong.
The last belt is not in case. I am looding with Vihtavuori n340
Jorgen

[Calehedron]

In the Speer manual it lists 1.135" for a 115 TMJ and 1.130" for 125 Lead RN. I dont know why they dont have the 115 Lead RN since it is their mould.

If you seat it just a hair past the lube groove and it chambers ok, that should be about right. Measure that length and start with low end charges and go from there.

[hotwheelz]

Lyman 3rd edition shows a 120rn lead bullet 1.065 OAL dont know if this will help ....


Calehedron .

If you seat it just a hair past the lube groove and it chambers ok, that should be about right. Measure that length and start with low end charges and go from there.

I agree with Calehedron I have done the same a time or 2

[runfiverun]

you wanna run your 9's as long as you can.
the prssure rises quickly the deeper you go.