nueces5
06-29-2020, 08:51 PM
Hello everyone, for a year now I have been trying to improve precision faster. I use an Argentine Mauser 1909 7.65x54 with boolit 314299, PC with transparent polyester and gascheck that I myself make from aluminum.
Size with lee sizing die 314 and panlube.
At speeds of approximately 1900 FPS I have achieved 1.5 MOA, shooting at 150 meters. At 2300 FPS I can't go below 2.5 MOA.
I am trying to put the gaschecks before PC, so they do not come out when I make panlube.
Today I had the idea to do a test and I have been quite satisfied.
I melt my lubricant (simple lube) in a can and immerse the boolit, take it out and clean the gaschek. I let it cool and run it through the Lee size. Here I put the photos.
As soon as the quarantine is over, I'm going to shoot them.
https://i.ibb.co/4FCVvRp/20200629-161106.jpg (https://ibb.co/TwJgjMt)
https://i.ibb.co/hDhCN48/20200629-161123.jpg (https://ibb.co/NZQ7qJY)
Size with lee sizing die 314 and panlube.
At speeds of approximately 1900 FPS I have achieved 1.5 MOA, shooting at 150 meters. At 2300 FPS I can't go below 2.5 MOA.
I am trying to put the gaschecks before PC, so they do not come out when I make panlube.
Today I had the idea to do a test and I have been quite satisfied.
I melt my lubricant (simple lube) in a can and immerse the boolit, take it out and clean the gaschek. I let it cool and run it through the Lee size. Here I put the photos.
As soon as the quarantine is over, I'm going to shoot them.
https://i.ibb.co/4FCVvRp/20200629-161106.jpg (https://ibb.co/TwJgjMt)
https://i.ibb.co/hDhCN48/20200629-161123.jpg (https://ibb.co/NZQ7qJY)