329 bullets

[milsurp mike]

Is it neccesary to use gas checks when firing 10 gr. of unique powder?thanks mike

[GabbyM]

Assuming that's the S&W model #329 in 44 mag with a 240 grain bullet I'd say no.
You don't need a gas check in any 44 mag pistol load.

[milsurp mike]

I'll be firing them in a 8x56 styer carbine,sorry for the shotty details. mike

[RU shooter]

Ive shot 10 gr of Unique in the 30-06 and 54R without a GC with good results.

[milsurp mike]

Thanks guys.mike

[runfiverun]

if it is a g/c mold the 10 gr load might be right on the edge to start.
you will wanna run those boolits a bit bigger then your bbl size,this really helps when you are using a g/c design without g/c's.
try to get them as big as will chamber and leave a thou or so for neck expansion.