Cabela's Invest arms hawken Thimble screws

[Theditchman]

I am looking for a set of rib and thimble mounting screws for this rifle....does anyone know what will work?

[arcticap]

If Investarms uses the same screws for different models, then the screws should be available from Lyman Products.
They sell most of the Investarms guns under their name but not the Hawken.
Who knows, maybe they will even send you the screws for free just for asking. --->>> https://www.lymanproducts.com/contacts/

The Investarms products page has the manuals to download, perhaps you can get the part number from the Deerstalker or another model and compare it to the part number for their Hawken to see if it's the same #. --->>> http://www.investarm.com/eng-avancarica.html

Or else you can contact Investarms on their contact us page and ask for help with obtaining the screws or the spec's for the threading.
And then obtain similar ones.

I guess you could always bring the barrel into a hardware store and try to find screws that will fit.

[Theditchman]

Thanks...I did all that all ready with no luck...I have compared the Lyman parts pic with the parts pics from Invest arms and they are different...I will keep searching

[Edward]

Thanks...I did all that all ready with no luck...I have compared the Lyman parts pic with the parts pics from Invest arms and they are different...I will keep searching

Bet you have not called Brownells ,They have most any screw I"ve needed

[1Hawkeye]

Try Log Cabin shop. Dan might have the spares you need and remember they are gonna be metric threads.

[Good Cheer]

I'd start at a good hardware store, the kind of place where the guy would love the challenge.

[Good Cheer]

Hey, does yours look something like this one?
If so I could maybe pull a screw and give you info to go by.
http://i.imgur.com/3sa4vBE.jpg (https://imgur.com/3sa4vBE)

[smithnframe]

Check with Dixie Gun Works!

[Theditchman]

Thanks to All.....I managed to get a cpl of metric screws and shortened them....