Happy Hour Indeed!!

[armexman]

Started having happy hour at 1:00PM DSMT!!
Don’t drink, have girlfriend,or gamble 😂🤣
Loading and shooting are my therapy during “these trying circumstances we are living through” (God help me, I’m hating those words so much) am loading NOE 401-170 TC hollow point in 10MM. Question what do those whom have this mold use for OAL? I’m at 1.255 for Glock 20 and Lonewolf 6” barrel, tighter than Glock stock!

[onelight]

If I was loading for 1 gun I would load it as long as would plunk and feed from the mag and work up my load for that OAL .
Particularly for a hot rod like a 10mm

[armexman]

Thank You ��
What length did You settle on?

[fredj338]

Your oal is what fits your gun. I load any bullet to ypthe longest oal that fits my bbl & mag all the way down.

[44Blam]

I load 10 MM to 1.26", but my 10mm is a GP100... These would likely chamber in a Glock 20 because I am using an Accurate 40-180H which is a TC shape...

I did try loading these in 40 S&W for my Glock 35 and had a lot of chambering issues. I have another boolit that I like to shoot in 40S&W so I use that.

They look like this:
262257