PDA

View Full Version : 32 win loads



Hiwall55
05-10-2020, 09:38 PM
Got some brass for my 1936 Marlin in 32 special, would anyone have any good load data for 170 grain jacketed and 170 grain cast FN-GC.
Thanks

Hick
05-10-2020, 10:44 PM
Jacketed: 28 grains of IMR 30301, 4064 or 4895 (Starting loads from manuals)

For 170 grain cast I use 6 to 9 grains of HP-38 for velocities that run from 1100 to 1400 fps (or in the range of 7.5 to 10.5 with Unique)

Conditor22
05-11-2020, 02:13 AM
my 336 like 32 WS H335 27 RCBS 170-FN-GC 0.324

Hiwall55
05-11-2020, 06:43 AM
Thanks guys

Randy Bohannon
05-11-2020, 07:29 AM
Have you not heard that 10 grains of Unique is the answer for all cast bullets ? It is the most consistent,accurate load I have found with 170 grain bullets for 1400 FPS in my 94 Winchester 32 Special.

Hiwall55
05-11-2020, 07:39 AM
Thanks Randy,I will try that.

webfoot10
05-11-2020, 04:50 PM
Any loads for the 30/30 will work in the 32 special.

-D-
05-12-2020, 07:45 PM
WW case
WLR primer
Hornady 170 grain flat point
WW 748 at 36.0 grains gets me 1923fps (measured at 35° F) with a SD of 5 out of my Winchester 94 with a 20" barrel and easily breaks two inches at 100 yards (five shots) using a receiver sight.

Hiwall55
05-12-2020, 09:05 PM
Okay guys,got the jacketed load,28.5 grains of RL7, 170 grain Hornaday FP, Fed primers,RP cases 2 inch groups at 100, went out to 200 and got 2 out of 3 bowling pins.
Next week will gry some unique with some 170 gr.cast