Corbin .452 Core Swage Die Dimension???

[fc60]

Greetings,

Anyone have a genuine Corbin .452 Core Swage Die?

I seek the diameter of the bleed hole.

Easy to measure, just use the micrometer on a piece of extruded wire.

The holes are usually double drilled and the one near the surface will be much larger than the one engaging the die cavity.

Cheers,

Dave

[Pipefitter]

Lead wire from my Corbin core swage die mics out at 0.065". The die swages out .380" cores to fit inside copper tubing jackets, but they work just as well in commercial jackets.

[fc60]

Greetings Pipefitter,

Many thanks. This information helps a lot.

Cheers,

David