PDA

View Full Version : RCBS Powder Measure and Bench Primer Tool



RIHP
04-30-2020, 03:39 PM
I have not seen a RCBS Powder Measure before with a clear tube, metal top, alum drop tube and measuring cylinder.

Any ideas on when it were made?
261350

Bench Priming Tool without automatic priming feed arm.
261353

poppy42
04-30-2020, 04:58 PM
All my uniflow’s look like that. As for the bench prime, looks like the only thing missing is the primer cups. They usually sit in 2 holes on the side not shown in the picture so they might be there I can’t tell.

Walks
04-30-2020, 06:30 PM
Those primer "punches" are no longer available.
At least that's what RCBS told me 10yrs ago.

Stuff is 40yrs old

M-Tecs
04-30-2020, 06:51 PM
Those primer "punches" are no longer available.
At least that's what RCBS told me 10yrs ago.

Stuff is 40yrs old

You were told wrong.

The current primer rods will work in the older Bench Priming Tool without automatic priming feed arm. At one time I had both. Still have two of the newer style. When I puchased my first in the mid 70's and it was it was the newer style.

https://www.rcbs.com/priming/bench-mounted/16-9460.html

garbler
04-30-2020, 10:42 PM
RCBS is one company that almost always supports their old tools. They are a phenomenal company in that respect and always reachable by phone.

RIHP
04-30-2020, 10:43 PM
Yes the primer rods are the same as the current priming tool.
This early model did not have the storage holes in the base for the rods.
Interesting pick up tunes with a type of snap ring at the end.261366

M-Tecs
04-30-2020, 11:22 PM
Not the it makes a difference but I am aware of at least four versions of this tool.

My very first one was the non automatic like you have in your first post. Not sure when they stopped making that style. I recieved it as a gift for loading a bunch of ammo for one of my dads friends. I upgraded that in the mid 70's to the automatic style. That did have the rod holders holes. They latter started adding the storage holes and the current one has a spring return on the primer tube arm.

jaguarxk120
05-21-2020, 05:27 PM
I put two magnets from a old hard drive on the seating arm, holds both primer punch's and
the clip from the primer magazine.