PDA

View Full Version : Load Development



compass will
11-23-2008, 08:52 PM
today I realized that load development can go on forever!

I been shooting a .308 with a 1 in 10 twist savage 10FP.
I have been playing with Lee 200 and 170 grain boolits. I thought I just about had a load for H4895 behind the 170 boolit figured out when I ran out of powder.

I went to pick up my spare 308 I use to empty my power thrower and picked up a 32 special instead. Then I noticed how the 32 looks pretty close to the 308, and H4198 shoots so well in the 32, So why not try it?
I loaded up another 50 with 10 each in loads between 20 and 22 grains in .5 grain jumps. (this is the range for the 32).

All I can say it one of those loads shot a group 2X tighter then I have been getting with H4895, plus it's like 6 grains less in powder per shot, an extra 80 loads per can!

Now I got to load some up in .1 grain increments to see what shoots best, then back to trying the 200 grain boolit to see what is best.

At any rate, Dec 27th is the next cast boolit match and I am aiming to be ready for it. I got my bench rest vice yesterday, sure beats sand bags. Were on a roll now!

Buckshot
11-24-2008, 01:07 AM
..............It's just too much fun. Beats the heck out of sitting in front of the tube watching Desperate HouseFraus, don't it ? :-)

...............Buckshot

mainiac
11-24-2008, 08:26 PM
Ever notice how once youve accepted the most accurate load, that the gun gets shuffled into the back of the safe? I have a hole bunch of guns that i dont shoot much anymore, because they shoot to good!HA!HA!

docone31
11-24-2008, 08:43 PM
Yeah, isn't that a trip.
I got some tack drivers that I just have stashed away. Some real comfortable good shootin rifles. Once I get them dialed in, they get boring.

Papa smurf
11-24-2008, 09:14 PM
Yry 25 gr. 4198-- 200gr Lee ,shoots real good in my rem 700. Good shooting -- Papa .

compass will
11-24-2008, 09:23 PM
try 25 gr. 4198-- 200gr Lee ,shoots real good in my rem 700. Good shooting -- Papa .

Is that H4198 or IMR4198?

I got a week or 2 to play with, I want to try the 200 again, don't know why, maybe its a pointer boolit and I want to make it work :lol: With the 1 in 10" it should like heaver boolits over the 1 in 12" which is standard in .308

Papa smurf
11-25-2008, 06:11 PM
IMR--Just a little more information --Used Lee liquid lube,.308 Lee push thru sizer ,Hornady gas check and did not relube after sizing. Cast from just wheel weights nothing added.----Good luck--- Papa