.329 to .332 lee lube die

[RedneckRob]

Can anyone here do this and how much ? You can pm if you want to or just post.
Thanks, Rob.

[RU shooter]

Can anyone here do this and how much ? You can pm if you want to or just post.
Thanks, Rob.
Only opening it up 3 thou will be an easy to accomplish your self with a round dowel and some emery cloth .get a dowel about 10" long, Wrap the emery cloth around the dowel add a bit of light oil ,stick it through the sizer die so you can hold on to it on each side . Sit on a chair and roll the dieback and forth across the top of your leg with some downward pressure for a few minutes , go size a bullet and measure and proceed as needed

[RedneckRob]

K. Sounds easy enough.
Thanks, Rob.

[cabezaverde]

I have done it by coating some bullets in valve grinding compound and pushing them through.

Just make sure you have some bullets coated with LLA to check your work after a few passes. Can't put metal back after removing it!