Bullet feeder motor shaft adapter

[Harry Tobin]

Now for some time now I’ve been trying to figuring out how to make the JGY-370 motor to work in a bullet feeder if you already have the files. The mr. bullet feeder motor was a perfect fit but no longer can you get one, they have cut the source from us. I refuse to take that, so I came up with a way to make it work. The JGY-370 motor comes with many different motor numbers but the one thing you need to know is that it is 18mm x33mm hole spacing for the mounting holes is necessary and most come with a 6mm shaft. Not good for our purpose, the 6mm shaft is to short plus needs to be 8mm. So I try my best to help guys on a motor that will work. So this is the work I have done on this.


https://www.youtube.com/watch?v=6NVm_wM1veI