RG1911
03-30-2020, 06:03 PM
I am forming 260Rem from virgin military surplus 308 cases. A test indicates that I will need to turn the necks down about .003" to make sure the cases have sufficient clearance for extraction. (It's a semi-auto rifle.)
Doing this causes the arbor of the K&M tool to overheat unless I let the tool cool off between cases.
Many moons ago, my 'smith sold me a couple aerosol cans of a coolant (and possibly lubricant) that really worked. Naturally, I'm out of it and cannot remember the name. Doing a search I came up with four aerosols that look like they might work:
Wahl Blade Coolant Lubricant
https://www.ebay.com/itm/WAHL-Blade-Ice-Coolant-Lubricant-Cleaner-Spray-14oz/174094211892
Zep Lubeze
https://www.globalindustrial.com/p/metalworking-tools/metal-fluids/metalworking-fluids-2/lubeze-drill-chill-cutting-oil-16-ounce-aerosol-can-12-cans
Cool Tool II
https://www.ajaxtoolsupply.com/coiicuandtaf1.html
Miller Stephanson Freeze Spray
https://www.zoro.com/miller-stephenson-freeze-spray-10-oz-aerosol-can-ms-242l/i/G2124923/feature-product
The last one, the Miller Stephanson, *looks* like how I remember the can looking.
Does anyone here use coolant in an aerosol can and, if so, can you recommend any of these products (or one that I did not find)?
Thank you,
Richard
Doing this causes the arbor of the K&M tool to overheat unless I let the tool cool off between cases.
Many moons ago, my 'smith sold me a couple aerosol cans of a coolant (and possibly lubricant) that really worked. Naturally, I'm out of it and cannot remember the name. Doing a search I came up with four aerosols that look like they might work:
Wahl Blade Coolant Lubricant
https://www.ebay.com/itm/WAHL-Blade-Ice-Coolant-Lubricant-Cleaner-Spray-14oz/174094211892
Zep Lubeze
https://www.globalindustrial.com/p/metalworking-tools/metal-fluids/metalworking-fluids-2/lubeze-drill-chill-cutting-oil-16-ounce-aerosol-can-12-cans
Cool Tool II
https://www.ajaxtoolsupply.com/coiicuandtaf1.html
Miller Stephanson Freeze Spray
https://www.zoro.com/miller-stephenson-freeze-spray-10-oz-aerosol-can-ms-242l/i/G2124923/feature-product
The last one, the Miller Stephanson, *looks* like how I remember the can looking.
Does anyone here use coolant in an aerosol can and, if so, can you recommend any of these products (or one that I did not find)?
Thank you,
Richard