PDA

View Full Version : Ahrends Grips refinish Part III (conclusion)



Patrick L
03-27-2020, 10:58 PM
Well they're done. After about 5 or 6 coats of tung oil, I let it cure then buffed it with fine bronze wool and Renaissance wax. Two coats of wax and here they are

https://i.imgur.com/JAF87mt.jpg

And back on the shiny long one

https://i.imgur.com/zr6GkJp.jpg

In hindsight, I wish I had gone just a shade browner, but compared to the original light pink

https://i.imgur.com/c0qXKkS.jpg

I think they look a lot better now. Plus, the tung oil/wax will only get better the more I handle it.

Finally here's a shot of the 27-2 with my K22. It wears the same grips in American walnut, which I ordered unfinished and did the same tung oil finish on.

https://i.imgur.com/e1nfJQm.jpg

LAH
03-27-2020, 11:06 PM
Nice.

contender1
03-28-2020, 08:11 AM
You missed a spot!



JUST KIDDING!

Those look quite nice! You did a great job!

EMC45
03-29-2020, 09:33 PM
Well done