BT Sniper
03-24-2020, 09:47 PM
Here is a cost break down of both what I deem necessary and what additional upgrades I have to offer to make 6mm cal bullets from various jacket materials using my dies.
Here is my complete package offer for making excellent 243 caliber bullets from both commercial jackets and 22mag/17HMR brass.
First of all I recommend using a Lee Classic Cast press with my BTSniper premium dies. I offer an improved version of the Lee Classic Cast press that I have modified specifically to handle the pressures of swaging. This press has modified linkages that produce over twice the leverage of the stock press and comes with a new threaded ram and auto eject set up.
Should the customer already have the Lee Classic Cast press all that is needed is my auto eject set up and the press will be good to go for use with my dies.
BTSniper Premium 243 cal Swage Die Kit
https://i.imgur.com/UfEpDgFl.jpg
Derim die and base punch not shown in pic
The best choice for making both affordable, deadly and accurate 243 cal bullets is to use scrap 22mag/17hmr brass for jackets.
https://i.imgur.com/8QmHOJ5m.jpg
For customer that already has the Lee press this kit includes everything listed below plus samples of each step of the process, 1/2oz. swage lube, instructions and excellent customer support.
$699.00 point form die (available in 6s, 8s or VLD 12s ogive)
$499.00 core seat die
$549.00 core bleed die
$250.00 derim die (22Mag/17HMR)
$276.00 four threaded base punches
$249.00 eleven cavity core mold
$250.00 Auto eject for either Lee Classic of press with 1" ram
$2772.00
Additional addons or upgrades. Add costs shown below to above package offered price.
BTSniper Improved Lee Swage Press
https://i.imgur.com/BRKdQX7l.jpg
$249.00 add on
Traditional 9 degree Boat tail
https://i.imgur.com/2GwdC5Vm.jpg
$250.00 Boat tail base punch for point form die
$100.00 upgrade to Boat tail core seat die
$350.00 add on
Standard reloading press options
Shell holder style base punch
https://i.imgur.com/ie3VMmmm.jpg
$89.00 ea.
*same price as listed above for boat tail options
Auto Eject System for press with 1" ram
https://i.imgur.com/A1Fdvdjm.jpg
$250.00
These are the numbers, price and tooling required to form 243 cal bullets from various jacket materials.
Feel free to contact me for additional details. Let me know your email address and I'll be happy to send copy of instruction manuals for potential customers to look over.
For order instructions or any questions feel free to contact me.
Brian Thurner
PO BOX 1783
Hood River, OR.
97031
BT_Sniper@hotmail.com
BTSNIPER llc.
541-436-4095
Here is my complete package offer for making excellent 243 caliber bullets from both commercial jackets and 22mag/17HMR brass.
First of all I recommend using a Lee Classic Cast press with my BTSniper premium dies. I offer an improved version of the Lee Classic Cast press that I have modified specifically to handle the pressures of swaging. This press has modified linkages that produce over twice the leverage of the stock press and comes with a new threaded ram and auto eject set up.
Should the customer already have the Lee Classic Cast press all that is needed is my auto eject set up and the press will be good to go for use with my dies.
BTSniper Premium 243 cal Swage Die Kit
https://i.imgur.com/UfEpDgFl.jpg
Derim die and base punch not shown in pic
The best choice for making both affordable, deadly and accurate 243 cal bullets is to use scrap 22mag/17hmr brass for jackets.
https://i.imgur.com/8QmHOJ5m.jpg
For customer that already has the Lee press this kit includes everything listed below plus samples of each step of the process, 1/2oz. swage lube, instructions and excellent customer support.
$699.00 point form die (available in 6s, 8s or VLD 12s ogive)
$499.00 core seat die
$549.00 core bleed die
$250.00 derim die (22Mag/17HMR)
$276.00 four threaded base punches
$249.00 eleven cavity core mold
$250.00 Auto eject for either Lee Classic of press with 1" ram
$2772.00
Additional addons or upgrades. Add costs shown below to above package offered price.
BTSniper Improved Lee Swage Press
https://i.imgur.com/BRKdQX7l.jpg
$249.00 add on
Traditional 9 degree Boat tail
https://i.imgur.com/2GwdC5Vm.jpg
$250.00 Boat tail base punch for point form die
$100.00 upgrade to Boat tail core seat die
$350.00 add on
Standard reloading press options
Shell holder style base punch
https://i.imgur.com/ie3VMmmm.jpg
$89.00 ea.
*same price as listed above for boat tail options
Auto Eject System for press with 1" ram
https://i.imgur.com/A1Fdvdjm.jpg
$250.00
These are the numbers, price and tooling required to form 243 cal bullets from various jacket materials.
Feel free to contact me for additional details. Let me know your email address and I'll be happy to send copy of instruction manuals for potential customers to look over.
For order instructions or any questions feel free to contact me.
Brian Thurner
PO BOX 1783
Hood River, OR.
97031
BT_Sniper@hotmail.com
BTSNIPER llc.
541-436-4095