gcollins
11-20-2008, 12:08 PM
Hi Guys,
i want to thank all of you for the replys on my other post. I learned that pure lead doesn't work! I have found that the 30/1 makes a nice Bullet! I also have found out that you cannot use a powder dump and get a accurate charge! You have to scale every load!
Here is a question, I bought a little tin, my brother loaned me a super high dollar digital scale, my bullets are pouring either dead on, or no more than a 1/4 of a grain off. I have read where people go to scrap yards and buy there tin? I only have one scrap yard 40 miles away, and have not check them out, to my best knowledge, they are a recyle center, so if I was to call over there, what would i ask them fo?Graingers has tin sodier for $6.99 a pound roll it is 97% tin the other ???.
I would be great full for any and all advice>
Thanks greg
i want to thank all of you for the replys on my other post. I learned that pure lead doesn't work! I have found that the 30/1 makes a nice Bullet! I also have found out that you cannot use a powder dump and get a accurate charge! You have to scale every load!
Here is a question, I bought a little tin, my brother loaned me a super high dollar digital scale, my bullets are pouring either dead on, or no more than a 1/4 of a grain off. I have read where people go to scrap yards and buy there tin? I only have one scrap yard 40 miles away, and have not check them out, to my best knowledge, they are a recyle center, so if I was to call over there, what would i ask them fo?Graingers has tin sodier for $6.99 a pound roll it is 97% tin the other ???.
I would be great full for any and all advice>
Thanks greg