PDA

View Full Version : ACTIVE - 223/556 NATO HEAVY 75g HP or Solid - AR15 Rifle round



Pages : [1] 2

Lakehouse2012
03-20-2020, 05:07 PM
LAST CALL on 07MAR2021


- Casting at .227
- HP or Solid (you choose)
- Flat Base or Gas Check (you choose, only with a groove)
- Grooved or NLG (you choose, if you choose NLG you will only get a FB)
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys are included
- RCBS/Lyman top punch is included
- Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +$20)
-Sample of sprue lube is included (15ml)

Pins included will be at a MINIMUM of: Large round, Small round and a blank pin.

75 grains as a Solid w/grooves
76 grains as a Solid NLG
73 grains as an HP w/grooves
74 grains as an HP NLG

Click image for larger version.

258852

Mold Choices and Pricing


Changes in RED
- 3-cav Brass for HP (from 2-cav block) --> 85 Euro
- 6-cav Brass for Solid --> 65 Euro
- 8-cav Aluminum for Solid --> 65 Euro


NEW SHIPPING DETAILS

shipping is approximently 16 euros for first mold.

If you purchase 2 molds it is 18 euros (for both)

if you take 3 molds shipping is aprox 20 euros....

Shiping is with DHL, these are live rates AND CAN CHANGE UP OR DOWN


GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.

Group Buy List

3 cavity HP (Brass mold) (Lube groove or NLG) with (Flat base or Gas Check)
1) (flyingmonkey35) - HP NLG - NEED EMAIL ADDRESS on this one
2) (Markopolo) - 3 cav, HP, GC - f i g e l s k i at y a h o o
3) (Kylongrifle32 - 3 cav HP, PB - Mike dot Keith dot 700 at Gmail dot com
4) (bronte454) - 3 cav HP, GC - thadd3220 at yahoo dot com
5) (Greg) - 3 cavity HP, GC - kratzner (at) charter (dot) net
6) (soflarick) - 3-cav HP, GC, +handles - soflarick at bellsouth. net
7) (Boomsticks Firearms) - 3 cav HP, GC - boomsticksfirearms at lowcountry dot com
8) (Lakehouse2012) - 3-cav HP, GC - sorgatz At ameritech d0t net - (Honcho mold)
9) (Lakehouse2012) - 3-cav HP, GC - sorgatz At ameritech d0t net - (Honcho mold)
10) (monkey wrangler) - 3 cav, HP, NLG + handle - mgehlenmesa at aol dot com
11) (OutdoorDave) -3-cav, HP with the blank pin, lube groove and gas check. - littleblacklab at g mail dot com
12) (Lonegun1894) - 3 cav, HP with GC, and all pins. +handles - Lonegun1894 at yahoo dot com
13) (Brick85) - 3 cav, HP, GC - house of tang at yahoo dotcom
14) (whelenshooter) - 3 cavity brass, HP, GC, grooved - mcminntd at ymail dot com
15) (meadmkr) - 3 cav, HP, GC, grooved - meadmkr at y a h o o dot com
16) (rcn11thacr) - 3 cav, HP, NLG, +handles - Redoldspot at gmail dot com
17) (AviatorTroy) - 3 cav HP, LG, GC - Aviatortroy at gmail dot com
18) (Beaker424) - 3 cav HP brass, Lube Groove, GC, all pins + handle - beaker424 at gmail dot com
19) (Beaker424) - 3 cav HP brass, NLG, Flat Base, all pins + handle - beaker424 at gmail dot com
20) (Lonegun1894) - 3 cav, HP with GC, and all pins. +handles - Lonegun1894 at yahoo dot com.
21) (who) - 3-cav, GC, LG, HP + handle - R1niceler at comcast dot net
22) (Cave) - 3-cav solid GC with groves +handles - j dot huntblelectrical At yahoo dot com
23)
24) (Lion2017) - 3 cav HP, GC - herrgiessviel at gmail.com
25) (Krh1326) - 3 Cav HP - GC - Krhenrikson at MSN dot com
26)
27)
28)




6 cavity Solid (Brass mold) (Lube groove or NLG) with (Flat base or Gas Check)
1) (ilium) - 6 cav brass, solid, NLG +handles - iliumconst at gmail dot com
2) (monkey wrangler) - 6 cav, NLG + handle - mgehlenmesa at aol dot com
3) (Lion2017) - 6 cavity Brass, with grooves, GC - herrgiessviel at gmail.com
4) (5Shot) - 6-cav, GC, Lube Groove - Jjdralston at aol dot com
5) (Beaker424) - 6 cav Solid brass, Lube Groove, GC + handle - beaker424 at gmail dot com
6) (Beaker424) - 6 cav Solid brass, NLG, Flat Base + handle - beaker424 at gmail dot com
7) (Lonegun1894) - 6-cav solid grooved, GC - Lonegun1894 at yahoo dot com
8) (LabGuy) - 6-cav Solid w/grooves, GC - LCEL at hotmail dot com
9) (propwashp47) - 6 cav brass, NLG - drichardson40 at austin.rr.com
10) (Armorguy63) - 6 cav Solid, NLG, Flat Base +handle - kshafer1 At gmail dot com
11)
12)


8 cavity SOLID (Aluminum mold) (Lube Groove or NLG) with (Flat base or Gas Check)
1) (Lakehouse2012) - 8 cav, GC - sorgatz AT aneritech dot net (Honcho mold)
2) (Dapaki) - 8-cav, NLG - spamento at gmail dot com
3) (John Wayne) - 8 cav, GC, + handles - d r o b e r tsk at gm ail dot c om
4) (Kawacharles) - 8-cav, NLG - kawacharles1973 at g mail dot com
5) (sigep1764) - 8-cav, Grooved, GC + handle- kylempcc at gmail dot com
6) (rancher1913) - 8-cav Alum, NLG - rancher1913atyahoodotcom
7) (hades) - 8 cavity alum, grooved, GC +handles - Calebwilking At gee mail dot com
8) (oldfartz) - 8 cav, GC - oldfarts1952at aol dot com
9) (FLYCUTTER) - 8 cav, GC, +handles - Runderscore KARK atATTdotnet
10) (Plate plinker) - 8 cav, NLG - plateplinker at gmail dot com
11) (FabMan) - 8-cav, NLG, FB - hestonhill at yahoo dot com
12) (PNW_Steve) - 8 alum, GC - Sgregg64-at-gmail-dot-com
13) (sigep1764) - 8-cav, NLG, FB - kylempcc at gmail dot com
14) (Olsmoky) - 8-cavity NLG, +Handles - olsmoky95 at gmail dot com
15) (Olsmoky) - 8-cavity NLG, +Handles - olsmoky95 at gmail dot com
16) (Chuck72) - 8 cav, LG, GC - Ch folks at gm ail dot com
17) (jimlj) - 8 cavity aluminum, NLG +Handles - jimlj at g mail d0t c0m
18) (Dimner) 8-cav, grooved, GC, + handles - dimner at gmail dot com
19) (ballistim) - 8 cav SOLID, LG, GC - bALLiStiM(at)YaHoO(dot)CoM
20) (pjh42) - 8 cavity solid with grooves and gas check- orig in al pjh 421 at g mail . co m
21)
22) (zeljohn) - 8 cav Solid w/grooves, GC - zeljohnatcenturylinkdotnet
23) (historicfirearms) - 8-cav lube groove, GC - nomadpilot77 at gmail dot com
24) (pack3480) - 8 cavity NLG Aluminum +handles - dcasad(at)hotmail(dot)com
25) (klobbermeister) -8 cav alum, NLG, +handles - klobbermeister at ameritech dot net
26) (btreanor) 8-cav, solid, GC - b t r e a n o r at h o t m a i l . c o m
27) (bushog) -8 cavity SOLID with Lube Groove and Gas Check - boo-haaa at hot maildot com
28) (cainttype) - 8 cav Alum, FB - drctml AT yahoo Dot com
29) (Ep55555) - 8 cav Alum, FB, NLG - Mighty_orion (at) Hotmail.com
30)
31)

flyingmonkey35
03-20-2020, 05:20 PM
74 grains as an HP NLG

Largest cav available




Sent from my SM-G960U using Tapatalk

slide
03-20-2020, 07:25 PM
One eight cavity solid,NLG, flat base aluminum bennyritteratyahoodotcom.

sigep1764
03-23-2020, 12:25 AM
How much money are they gonna be?

John McCorkle
03-24-2020, 02:44 PM
I'll throw in for a brass 3 cavity go NLG gas check

Sent from my moto g(7) power using Tapatalk

Dapaki
03-24-2020, 04:15 PM
76 grains as a Solid NLG flat base - 8-cav Aluminum, please! spamento at gmail dot com

sigep1764
03-24-2020, 11:41 PM
Again, how much are the molds gonna be?

slide
03-25-2020, 01:33 AM
Lakehouse2012 is the honcho. You might send him a pm

Lakehouse2012
03-25-2020, 01:25 PM
Again, how much are the molds gonna be?

sigep1764- The price has been left off intentionally, until I get a response from Miha on:
1) how many cavities he is willing to machine, and on which blocks.
2) what that actual cost will be.

Many of us have SIGNIFICANTLY more time to watch this site, I get it, but Miha is still running his business, and family amid this current world-wide situation. So you're gonna have to be patient.

As soon as the numbers are given to me, I will post them.

Lakehouse2012

John Wayne
03-25-2020, 01:26 PM
d r o b e r tsk at gm ail dot c om Aluminum 8 cavity with lube grooves, solid, gas check. Thanks! Can we add handles too?

dimaprok
03-25-2020, 11:43 PM
Wouldn't a solid bullet with no lube groove weight more than one WITH lube grooves? Is this a typo or the bullet is shorter and lighter?
75 grains as a Solid w/grooves
66 grains as a Solid NLG

Markopolo
03-25-2020, 11:51 PM
i would like the 3 cav brass gas check HP with groves version please... f i g e l s k i at y a h o o

Iron369
03-26-2020, 01:10 AM
8-cav aluminum fb nlg hp.
ironj369 at gmail dot com

MiHec
03-26-2020, 04:38 AM
Working on this one......

MiHec
03-26-2020, 04:44 AM
I'm going to ask Miha if 7 cavities would fit in the 6-cav block, and 9-cav would fit in the 8-cav Aluminum

Sorry, no go

bronte454
03-30-2020, 10:33 PM
I’m definitely in for a 3 cav GC lube groove HP . I might get a second HP PB or maybe a 5 cav just have to see how things play out but definitely the 3 cav GC LG HP .... thadd3220 at yahoo dot com

Lakehouse2012
03-31-2020, 01:52 PM
Guys,

I just spoke to Miha, and have made changes to this GB. See text in RED, these will be the only blocks available.

Thanks,

LH

Iron369
03-31-2020, 01:56 PM
I guess I’m out then.

Kawacharles
03-31-2020, 02:53 PM
Aluminium 8-cav, solid, lube groove, plain base please!

kawacharles1973 at g mail dot com

Dapaki
04-04-2020, 02:41 PM
How we doin on this group buy?

John McCorkle
04-10-2020, 10:10 AM
I'll throw in for a brass 3 cavity go NLG gas check

Sent from my moto g(7) power using TapatalkNeed to resend my order to this one, my apologies

Sent from my moto g(7) power using Tapatalk

Kylongrifle32
04-19-2020, 01:10 PM
I would be in for a 3 cavity brass Hp, PB, LG
Mike dot Keith dot 700 at Gmail dot com

Beetmagnet
04-21-2020, 11:02 AM
I'm in on this one...just haven't decided which one yet.

Beetmagnet
04-21-2020, 11:09 AM
8 cav solid aluminum, NLG gas checked.
starkherz 199 at gee male dot com

alamogunr
04-21-2020, 02:07 PM
I'm interested in an 8 cavity solid NLG. I hope this is sufficient information to get a mold. The information I have seen so far suggests that somehow a solid NO LUBE GROOVEmold drops at 66 grains. I refer back to Post #11. Once this is cleared up, I will probably sign up.

Lakehouse2012
04-21-2020, 10:16 PM
Sorry Guys, I had that all screwed up, you both caught it... I've modified post #1.

BTW- I've been focused nearly 100% in the last 2 weeks, making face shields on my 3D printers, for the emergency responders, so admittedly, I've not been watching the forum as well as I should be...



Wouldn't a solid bullet with no lube groove weight more than one WITH lube grooves? Is this a typo or the bullet is shorter and lighter?
75 grains as a Solid w/grooves
66 grains as a Solid NLG


I'm interested in an 8 cavity solid NLG. I hope this is sufficient information to get a mold. The information I have seen so far suggests that somehow a solid NO LUBE GROOVEmold drops at 66 grains. I refer back to Post #11. Once this is cleared up, I will probably sign up.

alamogunr
04-22-2020, 12:11 AM
Hey! No worries. None of this is a matter of life or death like the first responders, medical workers, etc, face every day. If I don't get a mold, it is no big deal. At least my wife won't roll her eyes when I get a package from Slovenia.

Keep up the good work on the 3D face shields.

Greg
04-23-2020, 10:29 AM
I'll take a 3 cavity Gas Check - Hollow Point with Lube Groves

kratzner (at) charter (dot) net

slide
04-23-2020, 08:31 PM
As much as I hate to I am going to have to pull out. My AR's all have a 1/9 twist and these weights are too heavy. They won't stabalize in my rifles.

bronte454
05-29-2020, 09:58 PM
Anything moving on this I definitely want a 3 cav GC , lube groove hollow point and will most likely get the 8 cavity solid as well

Lakehouse2012
06-05-2020, 12:36 AM
Anything moving on this I definitely want a 3 cav GC , lube groove hollow point and will most likely get the 8 cavity solid as well

Yes, its moving, but I'm waiting to get pricing from Miha before I start organizing this thread for reuse.

Tazlaw
06-05-2020, 12:46 AM
Interested in 3 cav lube grove hp. But I need an upper limit on cost before I can commit. C a t o l l e s o n @ gmail dot com

Lakehouse2012
06-08-2020, 01:23 PM
OK Casters, Pricing and Shipping is updated in Post #1, take a look and make sure you are still on board. I am going to go update the 65g mold with same info, then will come back and start putting the buyers lists together.

Lakehouse2012
06-08-2020, 02:10 PM
FM- I've updated pricing info, but you need to add your disguised email into post #2 please.



74 grains as an HP NLG

Largest cav available




Sent from my SM-G960U using Tapatalk

Lakehouse2012
06-08-2020, 02:16 PM
John-

NLG and a GC isnt a valid option. Miha uses a ream and cleans out after the initial cut, and this cleans out the GC groove. If you are interested, please update your post.


I'll throw in for a brass 3 cavity go NLG gas check

Sent from my moto g(7) power using Tapatalk

Lakehouse2012
06-08-2020, 02:28 PM
Again, how much are the molds gonna be?

I received pricing today from Miha, and updated in post #1

Lakehouse2012
06-08-2020, 02:36 PM
Iron- The HP is only built in the 3 cav brass mold, not the 8-cav aluminum


8-cav aluminum fb nlg hp.
ironj369 at gmail dot com

Iron369
06-08-2020, 02:40 PM
Iron- The HP is only built in the 3 cav brass mold, not the 8-cav aluminum

I saw the revisions and said I wasn’t interested any longer back on 3/31.

Lakehouse2012
06-08-2020, 02:44 PM
Beet- Miha cant do the NLG and then leave that last groove in for the GC. If you want NLG it has to be FB. Let me know what you would like to do.



8 cav solid aluminum, NLG gas checked.
starkherz 199 at gee male dot com

Lakehouse2012
06-08-2020, 02:46 PM
I'm interested in an 8 cavity solid NLG. I hope this is sufficient information to get a mold. The information I have seen so far suggests that somehow a solid NO LUBE GROOVEmold drops at 66 grains. I refer back to Post #11. Once this is cleared up, I will probably sign up.

Hi John,

Are you still interested? If yes, please update your post and I'll get you on the list.

Lakehouse2012
06-08-2020, 02:57 PM
Anything moving on this I definitely want a 3 cav GC , lube groove hollow point and will most likely get the 8 cavity solid as well

Your timing is good! I've updated pricing and am working on the list. Let me know if you want to add an 8-cav

Lakehouse2012
06-08-2020, 03:01 PM
Interested in 3 cav lube grove hp. But I need an upper limit on cost before I can commit. C a t o l l e s o n @ gmail dot com

85 + 16 Euro = 101 Euro then you have $ conversion depending on if you use PP or a CC, it's about $115USD on todays market. our dollar is really strong compared to the euro right now. Let me know if you are interested. post here please.

Lakehouse2012
06-08-2020, 03:03 PM
OK- I think I have all of you updated properly. please look yourself and make sure I didnt miss anything.

I think these will move pretty quickly!

sigep1764
06-08-2020, 11:56 PM
Add me in for an 8 cavity plain base, lube groove. kylempcc at gmail dot com. I would like a set of handles as well.

Lakehouse2012
06-10-2020, 12:20 AM
Aluminium 8-cav, solid, lube groove, plain base please!

kawacharles1973 at g mail dot com

Check my work, I might have your listed twise?

Lakehouse2012
06-10-2020, 12:22 AM
How we doin on this group buy?

put your mold requireminets in and disguized email, thats all it it

sigep1764
06-10-2020, 12:56 AM
Check my work, I might have your listed twise?

Kawa is listed three times, once for the 6 cav and twice for the 8 cav.

Lakehouse2012
06-11-2020, 12:19 AM
Add me in for an 8 cavity plain base, lube groove. kylempcc at gmail dot com


Kawa is listed three times, once for the 6 cav and twice for the 8 cav.

THANKS Sigep1764!! I think I fixed your request up and Kawa's. Have a great night!

sigep1764
06-11-2020, 10:32 PM
THANKS Sigep1764!! I think I fixed your request up and Kawa's. Have a great night!
No worries bubba! Keep working hard taking care of people. I know the job is demanding.

Lakehouse2012
07-27-2020, 03:47 PM
This one has been moved to Active, as it has the required buyers.

Dapaki
07-27-2020, 08:28 PM
Whoot!!!

slide
07-28-2020, 12:35 PM
Lakehouse2012, I have bought a rifle that should stabilize this bullet. So put me back on the list for an aluminum 8 cavity,with lube grooves,flat base.

Lakehouse2012
07-28-2020, 03:58 PM
Lakehouse2012, I have bought a rifle that should stabilize this bullet. So put me back on the list for an aluminum 8 cavity,with lube grooves,flat base.

Awesome, I've added you back on!

the 1:7 will really rock with this boolit, can't wait to get mine.

BTW- thanks for the tip on the other thread!!

Postell
07-29-2020, 04:42 AM
8 cav, solid, grooves, gas check, r smith otis at G ma il. c om.... Thank you.

Lakehouse2012
07-29-2020, 06:32 AM
I've added you to the list, thank you!!


8 cav, solid, grooves, gas check, r smith otis at G ma il. c om.... Thank you.

Boomsticks Firearms
08-01-2020, 06:57 PM
(Boomsticks Firearms) 3 cavity HP GC (boomsticksfirearms at lowcountry dot com)

Lakehouse2012
08-01-2020, 11:04 PM
(Boomsticks Firearms) 3 cavity HP GC (boomsticksfirearms at lowcountry dot com)

Thanks Boom, I've added you to the list!

oldfartz
08-04-2020, 08:58 PM
I would like an eight cavity with lube grooves and gas check. Thank you oldfarts1952at aol dot com

Lakehouse2012
08-04-2020, 09:12 PM
Thanks Sir, I've added you. We are making good progress on these AR15 molds recently....


I would like an eight cavity with lube grooves and gas check. Thank you oldfarts1952at aol dot com

Dimner
08-11-2020, 03:21 PM
I'm interested in a 6 cavity brass, NLG, Flat Base + handles

(Dimner) 6 cavity brass, NLG, Flat Base + handles dimner at gmail dot com


Thanks!

Lakehouse2012
08-12-2020, 11:46 AM
I'm interested in a 6 cavity brass, NLG, Flat Base + handles

(Dimner) 6 cavity brass, NLG, Flat Base + handles dimner at gmail dot com


Thanks!

Thanks Dimner, I've got you on the list!

So you are also in SE Mich.... At some point we are going to have to get a sub-group together to talk casting with all of us in the area... After Covid of course.

Dimner
08-12-2020, 12:52 PM
Thanks Dimner, I've got you on the list!

So you are also in SE Mich.... At some point we are going to have to get a sub-group together to talk casting with all of us in the area... After Covid of course.

That's is a great idea :)

monkey wrangler
08-13-2020, 03:38 PM
I am in for
3 cavity brass HP NLG FB + handle
6 cavity brass solid NLG FB + handle
mgehlenmesa at aol dot com

Lakehouse2012
08-13-2020, 04:33 PM
Welcome to the group MW! I've added you to the list for both molds, thank you!!


I am in for
3 cavity brass HP NLG FB + handle
6 cavity brass solid NLG FB + handle
mgehlenmesa at aol dot com

FLYCUTTER
08-13-2020, 10:05 PM
I'll take a 8 cavity solid, aluminum, GC, with lube grooves and handles. Runderscore KARK atATTdotnet
Thank you.

Lakehouse2012
08-14-2020, 12:18 AM
I'll take a 8 cavity solid, aluminum, GC, with lube grooves and handles. Runderscore KARK atATTdotnet
Thank you.

Thanks Sir, I've got you on the list!

Coco89
08-20-2020, 11:15 PM
I am in for hp pb nlg wireless288 at gmail com

Lakehouse2012
08-20-2020, 11:26 PM
Thanks, I've got you on the list!


I am in for hp pb nlg wireless288 at gmail com

Plate plinker
08-21-2020, 10:37 PM
1 - 8 cavity NLG mold
plateplinker at gmail dot com

Lakehouse2012
08-22-2020, 12:13 AM
1 - 8 cavity NLG mold
plateplinker at gmail dot com

Thanks, I've added you to the GB

Dimner
08-22-2020, 01:52 PM
Just noticed that my entry in the first post doesn't specify flat base. Just wanted to point that out. Flat base (no gas check) is my intended request. :) can't imagine herding this many cats, lakehouse, you the man !

Lakehouse2012
08-22-2020, 05:17 PM
Just noticed that my entry in the first post doesn't specify flat base. Just wanted to point that out. Flat base (no gas check) is my intended request. :) can't imagine herding this many cats, lakehouse, you the man !LOL, it's a chore somedays. [emoji16][emoji16]

NLG forces it to be FB, so you are good to go

Sent from my SM-A102U using Tapatalk

OutdoorDave
08-24-2020, 01:38 PM
Is it too late to join this group buy?
I would like the three cavity, brass, HP with the blank pin, lube groove and gas check.
My email address is littleblacklab at g mail dot com

Thanks for pointing that out Lakehouse2021. I was really wanting the hollow point, but I figured the solid would be easier to cast.

Lakehouse2012
08-24-2020, 04:22 PM
Hi Sir, yes this is open for you to sign up. I want to clarify for you though. the 3-cav mold is only available in HP version, but there will be a blank pin that will make it a solid. If you want a solid-only then you need either the 6-cav brass or the 8-cav in aluminum. If you will edit your post to clarify for me, I will then add you to the list.

Thanks,



Is it too late to join this group buy?
I would like the three cavity, brass, solid with lube groove and gas check. Anything else I should add?
My email address is littleblacklab at g mail dot com

Lion2017
08-25-2020, 06:14 PM
please: 1 brass 6 cavity solid grooves GC herrgiessviel at gmail.com

PNW_Steve
08-25-2020, 06:22 PM
I am not sure if I am understanding the details. Can I get an 8 - Aluminum, No groove and gas check? I want to gas check and powder coat.

Any idea when the order may be sent in?

Lakehouse2012
08-25-2020, 06:24 PM
Sorry Steve, the NLG is a secondary machine operation that cleans all grooves out, including the GC. For PC, this is a really shallow groove and PC should get in there just fine.


I am not sure if I am understanding the details. Can I get an 8 - Aluminum, No groove and gas check? I want to gas check and powder coat.

Any idea when the order may be sent in?

Lakehouse2012
08-25-2020, 06:26 PM
Ok Sir, I've added you to the list.


Is it too late to join this group buy?
I would like the three cavity, brass, HP with the blank pin, lube groove and gas check.
My email address is littleblacklab at g mail dot com

Thanks for pointing that out Lakehouse2021. I was really wanting the hollow point, but I figured the solid would be easier to cast.

Lakehouse2012
08-25-2020, 06:27 PM
Thanks, I've added you to the list!


please: 1 brass 6 cavity solid grooves GC herrgiessviel at gmail.com

OutdoorDave
08-27-2020, 06:29 AM
Am I understanding the description correctly that the hollow point mould comes with two different sized hollow point pins, plus the blank pin? I’m not changing my order. This is the first time for me to buy a custom mould, group buy or otherwise. Just making sure I understand the “lingo”.

Lakehouse2012
08-27-2020, 11:18 AM
Yes, that is my intention but Miha (owner of MP) has the ultimate say on this depending on if he can physically make these pins. I'm usually right with these things, but Miha reserves the right to over-ride me on manufacturing. Hope this stays true...


Am I understanding the description correctly that the hollow point mould comes with two different sized hollow point pins, plus the blank pin? I’m not changing my order. This is the first time for me to buy a custom mould, group buy or otherwise. Just making sure I understand the “lingo”.

FabMan
08-29-2020, 09:28 AM
One eight cavity solid,NLG, flat base aluminum Please
hestonhill at yahoo dot com

Lakehouse2012
08-29-2020, 10:28 AM
Great, I've got you on the list!


One eight cavity solid,NLG, flat base aluminum Please
hestonhill at yahoo dot com

PNW_Steve
08-29-2020, 11:24 AM
OK.

I'll take one of the 8 aluminum with gas check.

What is the ETA?

5Shot
08-29-2020, 01:42 PM
Any chance of getting a weight estimate on the 6 cavity brass?

Lakehouse2012
08-29-2020, 02:58 PM
Will you please edit your post and add a "disguized" email.

ETA is difficult to say. Its up to 2 things:

1) How quickly we are able to get to a minimum of 25 HP molds, Miha has to have the pins made in batches of 100 from his supplier.
2) How backed up is he with other molds that he is machining. All the shops throughout the world are having trouble getting product out the door, MP has the same issues.

That said- This group buy has been gaining traction, folks have been very interested in it. It might be 2-3 months and these are in our hands (only a guess by me)



OK.

I'll take one of the 8 aluminum with gas check.

What is the ETA?

Lakehouse2012
08-29-2020, 03:01 PM
Any chance of getting a weight estimate on the 6 cavity brass?

My postal scale is not with me right now, but I'm guessing brass mold with handles is 5 lbs. Comparing that to the 8-cav aluminum I'd say is 4 to maybe 4.2 lbs.

I'll get my scale back in a few days and verify.

Dimner
08-29-2020, 07:47 PM
266984


2lbs 11& 5/8 oz.

Using NOE handles. This is the 6 cav. Not HP...no pins

Lakehouse2012
08-29-2020, 09:10 PM
266984


2lbs 11& 5/8 oz.

Using NOE handles. This is the 6 cav. Not HP...no pins

Thank you Sir!! :) Reminder to self, dont estimate..... Engineers arent good at estimating....

PNW_Steve
08-29-2020, 10:31 PM
OK.

I'll take one of the 8 aluminum with gas check.

What is the ETA?

Sgregg64-at-gmail-dot-com

Lakehouse2012
08-30-2020, 01:07 AM
Sgregg64-at-gmail-dot-com

Thanks Sir, I have you on the list now.

Dimner
08-30-2020, 01:08 AM
Thank you Sir!! :) Reminder to self, dont estimate..... Engineers arent good at estimating....

I was right there with you thinking your estimate was correct.... I had to check the scale and rezero and weigh twice when I saw the weight. Casting with this thing makes it 'feel' like 5 lbs. But the bullets are so nice, I don't mind at all

5Shot
08-30-2020, 05:09 PM
I was right there with you thinking your estimate was correct.... I had to check the scale and rezero and weigh twice when I saw the weight. Casting with this thing makes it 'feel' like 5 lbs. But the bullets are so nice, I don't mind at all

Appreciate it. I'll go weigh some of my brass molds and decide if want to go brass or aluminum.

BulletFreak
08-30-2020, 09:49 PM
I want a mold. How do I get on this list

Lakehouse2012
08-30-2020, 11:54 PM
Just edit that post you made and tell if you want the 3-cav HP or 6-cav or 8-cav design and what type of bottom, Flat base or Gas Check.

Then put a disguized email on there as well, and I'll add you to the list.

BTW- Welcome to the forum, great to have new members. Let me know if I can help with anything at all!


I want a mold. How do I get on this list

5Shot
08-31-2020, 12:00 AM
6 Cav, GC, Lube Groove. Jjdralston at aol dot com

Lakehouse2012
08-31-2020, 09:27 AM
Thanks! I've got you on the list!


6 Cav, GC, Lube Groove. Jjdralston at aol dot com

sigep1764
09-11-2020, 12:33 AM
Lakehouse, I have modified my original post to include a set a of mold handles. Will you please update me on the list?

Lakehouse2012
09-11-2020, 01:03 AM
Lakehouse, I have modified my original post to include a set a of mold handles. Will you please update me on the list?

Done!

Great news, just talked with Miha and he will be able to combine the 65 and 75g molds into the same pin configuration. These GB's just got sped up!!

sigep1764
09-11-2020, 09:12 PM
Wahoo!!!! Lets get these closed out and drilled!!!

DanInCt
10-01-2020, 09:13 PM
3 cavity HP lube groove gas check + pins 75gr daneschner at g mail dot com

Lakehouse2012
10-01-2020, 10:32 PM
3 cavity HP lube groove gas check + pins 75gr daneschner at g mail dot com

Thank you Sir, Ive got you on the list!

Brick85
10-02-2020, 07:41 AM
I'm interested in a mould but my question is whether the HP is there for accuracy or for expansion?

Also, any thoughts on lead shaving off and into the gas port in an AR? I was sternly warned by a gunsmith friend of mine about this risk.


3 cavity HP lube groove gas check + pins 75gr daneschner at g mail dot com

Dan, are you a CCDL member?

Brick85
10-03-2020, 06:40 PM
Please put me on the list for a 75gr 3 cav HP gas checked mould. Thanks! house of tang at yahoo dotcom

Lakehouse2012
10-03-2020, 11:55 PM
Thanks Sir, I've got you on the list!


Please put me on the list for a 75gr 3 cav HP gas checked mould. Thanks! house of tang at yahoo dotcom

Kawacharles
10-07-2020, 06:04 AM
@Lakehouse2012: can you chance my order on NLG? Thanks.

Lakehouse2012
10-07-2020, 08:43 AM
@Lakehouse2012: can you chance my order on NLG? Thanks.

yes, I changed it

Coco89
10-16-2020, 11:18 AM
I like to add a gc to my hp nlg

DanInCt
10-17-2020, 12:59 AM
I'm interested in a mould but my question is whether the HP is there for accuracy or for expansion?

Also, any thoughts on lead shaving off and into the gas port in an AR? I was sternly warned by a gunsmith friend of mine about this risk.



Dan, are you a CCDL member?

I think so. I read the posts, never made it to an offical meeting but go to the rallies around here.

bdicki
10-17-2020, 10:32 AM
One eight cavity solid, NLG, aluminum bdickinson67098atroadrunnerdotcom

Lakehouse2012
10-17-2020, 10:37 AM
Gentlemen,

This GB is not offering a GC option when you choose NLG. Miha's machine process is using a secondary tool to remove all grooves, to get you a NLG. The only other way was if there was a second Cherry made, which we are not for this GB.


One eight cavity solid,NLG, gas check aluminum bdickinson67098atroadrunnerdotcom


I like to add a gc to my hp nlg

bdicki
10-17-2020, 07:24 PM
Gentlemen,

This GB is not offering a GC option when you choose NLG. Miha's machine process is using a secondary tool to remove all grooves, to get you a NLG. The only other way was if there was a second Cherry made, which we are not for this GB.
Sorry, the description says solid base or gas check, solid base it is.

Lakehouse2012
10-18-2020, 08:16 PM
Sorry, the description says solid base or gas check, solid base it is.

Thanks Sir, this is always tough one to clarify on the post. You are now on the list.

Coco89
10-19-2020, 08:42 PM
HP GC LG it is.

Lakehouse2012
10-19-2020, 10:04 PM
HP GC LG it is.

OK, I've modified you to lube groove, thanks

whelenshooter
10-22-2020, 01:15 PM
Please count me in with a 3 cavity brass, hp, gc, grooved. mcminntd at ymail dot com

thanks

Lakehouse2012
10-22-2020, 03:22 PM
Please count me in with a 3 cavity brass, hp, gc, grooved. mcminntd at ymail dot com

thanks

Thanks Sir, Ive got you on the list!

Olsmoky
12-03-2020, 12:13 PM
2-Aluminum 8-cavity NLG, +Handles

olsmoky95@gmail.com

Lakehouse2012
12-03-2020, 08:40 PM
Thanks Olsmoky, I've got you on the list!!


2-Aluminum 8-cavity NLG, +Handles

olsmoky95@gmail.com

meadmkr
12-08-2020, 07:26 AM
Please count me in with a 3 cavity brass, hp, gc, grooved. meadmkr at y a h o o dot com

Lakehouse2012
12-08-2020, 09:38 AM
Great, I have added you onto the list!

Thanks,


Please count me in with a 3 cavity brass, hp, gc, grooved. meadmkr at y a h o o dot com

flyingmonkey35
12-08-2020, 01:41 PM
We have any chickens yet? Or are we still counting eggs and waiting on hens to lay parts.


Mixing metaphors.

Sent from my SM-G960U using Tapatalk

Lakehouse2012
12-08-2020, 02:19 PM
:-P

Counting eggs at the moment. I texted Miha this morning, waiting on a response...



We have any chickens yet? Or are we still counting eggs and waiting on hens to lay parts.


Mixing metaphors.

Sent from my SM-G960U using Tapatalk

DanInCt
12-31-2020, 10:19 AM
Lakehouse, Drop me off this 75 grn mold. Ill stick on the lighter one though. Thanks. I have a different kid to feed who needs a mold now.

Lakehouse2012
12-31-2020, 11:18 AM
No problem, you are all set


Lakehouse, Drop me off this 75 grn mold. Ill stick on the lighter one though. Thanks. I have a different kid to feed who needs a mold now.

sigep1764
01-12-2021, 01:19 AM
Hey Lakehouse,
Ive been doing some reading and I think I would like an 8 cavity with lube grooves and gas checks, plus handles. Will you please update me?

Lakehouse2012
01-12-2021, 08:59 AM
Yes Sir, I've updated you!


Hey Lakehouse,
Ive been doing some reading and I think I would like an 8 cavity with lube grooves and gas checks, plus handles. Will you please update me?

Lonegun1894
01-14-2021, 10:11 PM
What twist does this require to stabilize it?

Lakehouse2012
01-14-2021, 11:22 PM
What twist does this require to stabilize it?

The 75g will stabilize with 1:7, 1:8 works well also.

Lonegun1894
01-15-2021, 01:45 AM
Thank you, Lakehouse2012! Could you please put me down for a 3 cavity brass HP with lube grooves, GC, and all pins? And a set of handles. Lonegun1894 at yahoo dot com please. Thank you very much!

Lakehouse2012
01-15-2021, 08:52 AM
Yes Sir, I've got you on the list in slot #12.

Thank you!


Thank you, Lakehouse2012! Could you please put me down for a 3 cavity brass HP with lube grooves, GC, and all pins? And a set of handles. Lonegun1894 at yahoo dot com please. Thank you very much!

rcn11thacr
01-17-2021, 04:56 AM
I’m in.
Small pin HP
Flat base
With Lee handles please
Redoldspot at gmail dot com

Lakehouse2012
01-17-2021, 10:17 AM
Thank you Sir, I've got you down on the 3-cav HP with FB.


I’m in.
Small pin HP
Flat base
With Lee handles please
Redoldspot at gmail dot com

bluejay75
02-01-2021, 04:29 PM
There are 10 solid molds listed on his website. He posted on FB this morning and roughly half the molds sold from the time he posted. I meant to do this earlier. Hope this helps.

Dimner
02-01-2021, 05:00 PM
interesting.... the ones I see new on the website are the solid No lube groove with gas check. Which I think we had previously thought was not possible, at least that's what I remember being said.

Is it indeed possible to get a GC without Lube grooves? If so, I might go for that in the 65gr NATO group buy.

Lakehouse2012
02-01-2021, 05:28 PM
I called Miha when I read this post from bluejay. He had found 4-5 molds that werent listed on his site, while cleaning up his office and He list them. There arent enough to fill any of the GB orders and he didnt want to create any confusion to the GB.

Those molds are actually 65g NLG which then measure closer to 75g because of the missing groove. I dont think they have a GC though.



There are 10 solid molds listed on his website. He posted on FB this morning and roughly half the molds sold from the time he posted. I meant to do this earlier. Hope this helps.


interesting.... the ones I see new on the website are the solid No lube groove with gas check. Which I think we had previously thought was not possible, at least that's what I remember being said.

Is it indeed possible to get a GC without Lube grooves? If so, I might go for that in the 65gr NATO group buy.

Dimner
02-01-2021, 06:19 PM
They are listed as: 227-75 Nato - Gas check No lube groove, 8 cav. mold

276665

So I hope they do have a gas check. If they don't I probably wouldn't have ordered one :)

Lakehouse2012
02-01-2021, 06:56 PM
They are listed as: 227-75 Nato - Gas check No lube groove, 8 cav. mold

276665

So I hope they do have a gas check. If they don't I probably wouldn't have ordered one :)If that's what the ad says, you'll be good. I didn't know to ask him if they had a GC. Sorry about any confusion

Sent from my SM-A102U using Tapatalk

Chuck72
02-06-2021, 12:08 PM
Ch folks at gm ail dot com. 8 cav lg gc

Lakehouse2012
02-06-2021, 08:07 PM
Yes Sir, I've added you to the list!

Thanks,


Ch folks at gm ail dot com. 8 cav lg gc

mvintx
02-10-2021, 11:43 PM
OK, I'm sold. 8 cav aluminum, LG, GC. mvintx85 at yahoo dot com

Lakehouse2012
02-11-2021, 12:14 AM
:D

Hope that didnt seem like a sales pitch... You're gonna love this mold when it comes!

I've got you on the list, Thankyou Sir!


OK, I'm sold. 8 cav aluminum, LG, GC. mvintx85 at yahoo dot com

Dieselhorses
02-16-2021, 01:26 AM
What is the length for 73 gr HP

Lakehouse2012
02-16-2021, 08:49 PM
Hi DH,

I measured 6 of my GC'd solids. They average .780 +/- .005 I dont have the drawing but I will send a note to the designer and get better feedback.


What is the length for 73 gr HP

Dieselhorses
02-17-2021, 04:01 AM
Hi, thanks for info. I found out that weight isn’t always a factor as much as “length” is. I checked the ballistics calculator at Berger Bullets website and both 65 and 75 gr pills in 1/9 twist was more than acceptable. Hence I’ll probably order the 75 gr (73 gr no lube grooves/ HP FB). I wished someone would mimic a Hornady based bullet in cast as far as ballistic coefficient and ogive. There are so many variables surrounding the “POI” it ain’t funny! Thanks again!


Sent from my iPhone using Tapatalk

cainttype
02-17-2021, 06:35 PM
8 cav solid, gas-check.... drctml AT yaHoo dot Com

Lakehouse2012
02-17-2021, 07:25 PM
8 cav solid, gas-check.... drctml AT yaHoo dot Com

Yes Sir, I've added you. Thanks

cainttype
02-17-2021, 07:45 PM
Please remove me from the list.
I really wanted a gas/checked slick (no grooves), actually, and found it shortly after joining the buy here.
Sorry for any inconvenience.

Lakehouse2012
02-17-2021, 09:16 PM
Please remove me from the list.
I really wanted a gas/checked slick (no grooves), actually, and found it shortly after joining the buy here.
Sorry for any inconvenience.

No problem, I've removed you.

AviatorTroy
02-18-2021, 01:08 AM
If I can still get in on this I’d love to order the 3 cav HP LG GC. Thanks!

Aviatortroy at gmail dot com

Lakehouse2012
02-18-2021, 01:35 AM
Yes Sir, I've added you to the list, thanks!!


If I can still get in on this I’d love to order the 3 cav HP LG GC. Thanks!

Aviatortroy at gmail dot com

Dimner
02-18-2021, 02:21 PM
Howdy howdy...

An update for this GB as well

Please remove this brass mold: (Dimner) 6-cav, NLG, + handles - dimner at gmail dot com

and please add this aluminum mold: (Dimner) 8-cav, grooved, GC, + handles - dimner at gmail dot com

Lakehouse2012
02-18-2021, 08:17 PM
You've got it, I updated you on the list! Good choice BTW


Howdy howdy...

An update for this GB as well

Please remove this brass mold: (Dimner) 6-cav, NLG, + handles - dimner at gmail dot com

and please add this aluminum mold: (Dimner) 8-cav, grooved, GC, + handles - dimner at gmail dot com

ilium
02-22-2021, 07:48 PM
6 cavity brass; solid, flat base, NLG with handles.
iliumconst at gmail dot com

Lakehouse2012
02-23-2021, 12:28 AM
Yes Sir, I've added you to this one also.


6 cavity brass; solid, flat base, NLG with handles.
iliumconst at gmail dot com

Wolfdog91
02-23-2021, 10:26 AM
Would there be anyway to get a hp with no lube grooves and a gas check base ?

Lakehouse2012
02-23-2021, 06:14 PM
Would there be anyway to get a hp with no lube grooves and a gas check base ?

Unfortunately not on this GB. This one is 1 cherry (master) and if you want LG's removed, it also wipes out the GC in a secondary machining operation.

Beaker424
02-24-2021, 03:52 PM
3 cav HP brass, Lube Groove, GC, all pins + handle beaker424 at gmail dot com
3 cav HP brass, NLG, Flat Base, all pins + handle beaker424 at gmail dot com
6 cav Solid brass, Lube Groove, GC + handle beaker424 at gmail dot com
6 cav Solid brass, NLG, Flat Base + handle beaker424 at gmail dot com

Lakehouse2012
02-24-2021, 04:36 PM
Welcome to the forum! Now that is the way to cover your bases!! I've got these all on the list!

Thanks,


3 cav HP brass, Lube Groove, GC, all pins + handle beaker424 at gmail dot com
3 cav HP brass, NLG, Flat Base, all pins + handle beaker424 at gmail dot com
6 cav Solid brass, Lube Groove, GC + handle beaker424 at gmail dot com
6 cav Solid brass, NLG, Flat Base + handle beaker424 at gmail dot com

bdicki
02-25-2021, 12:32 PM
Please remove me from this buy.
13) (bdicki) - 8-cav solid, NLG - aluminum bdickinson67098atroadrunnerdotcom

Lakehouse2012
02-25-2021, 12:41 PM
Ok, I've removed you.

Thanks,


Please remove me from this buy.
13) (bdicki) - 8-cav solid, NLG - aluminum bdickinson67098atroadrunnerdotcom

soflarick
03-05-2021, 12:42 AM
Put me down for one 75gr 3-cav Gas Check Brass for HP, and a set of Lee handles. soflarick at bellsouth. net
Thanks a lot.

Lakehouse2012
03-07-2021, 10:04 PM
I'm very confused by your post. I dont see that you made a post to request ever being on this group buy. Please clarify


PLEASE CHANGE my request to 75gr 3-cav Gas Check Brass for HP, and the Lee handles. I forgot that the pins can be rotated to create a flat nose.

Thanks a lot.

Lakehouse2012
03-08-2021, 12:43 AM
LAST CALL on 07MAR2021

sigep1764
03-08-2021, 01:48 AM
Put me down for a second mold, 8 cavity aluminum no lube groove, no gas check.

Lonegun1894
03-08-2021, 11:34 AM
Could you please add a brass 6-cavity solid to mine with lube grooves and gas check? Lonegun1894 at yahoo dot com

Lakehouse2012
03-08-2021, 11:38 AM
Put me down for a second mold, 8 cavity aluminum no lube groove, no gas check.

Ok, I've added you on the list. Thanks,

Lakehouse2012
03-08-2021, 11:40 AM
Could you please add a brass 6-cavity solid to mine with lube grooves and gas check? Lonegun1894 at yahoo dot com

Ok, I've got you on the list, thanks

Lonegun1894
03-08-2021, 01:59 PM
Please add one more for me. For a total of TWO of the 3cavity brass HP with GC, at Lonegun1894 at yahoo dot com. Friend of mine wants one but doesn’t have an account here, yet.

ballistim
03-08-2021, 02:35 PM
Late to the party, but jumping in now if there’s still room...
8 cavity SOLID (Aluminum mold) (Lube Groove) with (Gas Check)
bALLiStiM(at)YaHoO(dot)CoM


Sent from my iPhone using Tapatalk

Lakehouse2012
03-08-2021, 05:29 PM
Please add one more for me. For a total of TWO of the 3cavity brass HP with GC, at Lonegun1894 at yahoo dot com. Friend of mine wants one but doesn’t have an account here, yet.

I've got you added

Lakehouse2012
03-08-2021, 05:30 PM
Late to the party, but jumping in now if there’s still room...
8 cavity SOLID (Aluminum mold) (Lube Groove) with (Gas Check)
bALLiStiM(at)YaHoO(dot)CoM


Sent from my iPhone using Tapatalk

I've got you added!

ballistim
03-08-2021, 05:36 PM
Thanks!


Sent from my iPhone using Tapatalk

ballistim
03-08-2021, 05:41 PM
.. forgot - LG please!


Sent from my iPhone using Tapatalk

Lakehouse2012
03-08-2021, 06:37 PM
.. forgot - LG please!


Sent from my iPhone using Tapatalk

No problem, lube groove is implied, unless you call out NLG. I updated for clarity :)

Lonegun1894
03-08-2021, 10:41 PM
Thank you very much!

who
03-09-2021, 01:34 AM
If still possible
3 cav GC LG HP
R1niceler at comcast dot net

Lakehouse2012
03-09-2021, 02:27 AM
If still possible
3 cav GC LG HP
R1niceler at comcast dot net

I've got you on the list!

rcn11thacr
03-11-2021, 09:50 PM
Please add NLG to my order. I am #16, And to clarify when I order small pin it also comes with the blank pin, correct? So I could get a 74 and a 76 grn out of the same mold?

Lakehouse2012
03-11-2021, 11:58 PM
I've updated you on the list. The NLG replaces the FB.

Yes the pin set will come with a blank so you can make solids when you want to.

Thanks,


Please add NLG to my order. I am #16, And to clarify when I order small pin it also comes with the blank pin, correct? So I could get a 74 and a 76 grn out of the same mold?

mvintx
03-11-2021, 11:59 PM
Sir, could you please add handles to my order? I'm #17 on the 8-cav aluminum list (mvintx).

Does LAST CALL mean it's going into production?

Lakehouse2012
03-12-2021, 07:50 AM
Sir, could you please add handles to my order? I'm #17 on the 8-cav aluminum list (mvintx).

Does LAST CALL mean it's going into production?

I've updated you.

Last call means its very close to production, hopefully within weeks, but recent history hasnt proven true...

glockky
03-15-2021, 06:38 AM
I’m in 3 cavity hp gas check twgrubb3 at gmail dot com

xiholdtruex
03-15-2021, 07:05 AM
im in if possible

8-cav, grooved, GC,

xiholdtruex at gmail dot com

Lakehouse2012
03-15-2021, 11:52 AM
Thanks guys, I've got you both on the list!


im in if possible

8-cav, grooved, GC,

xiholdtruex at gmail dot com


I’m in 3 cavity hp gas check twgrubb3 at gmail dot com

Kylongrifle32
03-15-2021, 03:21 PM
About to celebrate another " waiting on a mold " anniversary! Some how I keep remembering this one. The last two I had forgot about untill I got the invoice. LOL[smilie=p:

zeljohn
03-16-2021, 11:31 AM
I'm new to this, so here goes.
I would like 2 molds as follows:
8 cav Aluminum 76 gr Solid NLG Flat Base
8 cav Aluminum 75 gr Solid w/grooves Gas Check
zeljohnatcenturylinkdotnet

Lakehouse2012
03-16-2021, 11:43 AM
Welcome aboard zeljohn! I've got both molds updated on the list.

Thanks,


I'm new to this, so here goes.
I would like 2 molds as follows:
8 cav Aluminum 76 gr Solid NLG Flat Base
8 cav Aluminum 75 gr Solid w/grooves Gas Check
zeljohnatcenturylinkdotnet

LabGuy
03-17-2021, 09:48 AM
Please add me for 6 cavity brass 75 grain Solid w/grooves and gas check.

LCEL at hotmail.com

Lakehouse2012
03-17-2021, 06:57 PM
Please add me for 6 cavity brass 75 grain Solid w/grooves and gas check.

LCEL at hotmail.com

Thanks, I've got you on the list!

xiholdtruex
03-17-2021, 11:42 PM
Can you remove me from the 8 cav aluminum and add me to the

3 cavity hp , lube grooved and gas checked if possible please


Thanks in advance

Lakehouse2012
03-18-2021, 06:28 PM
Can you remove me from the 8 cav aluminum and add me to the

3 cavity hp , lube grooved and gas checked if possible please


Thanks in advance

I've got you all fixed up, thanks!

xiholdtruex
03-18-2021, 10:03 PM
thank you, you only put it gas checked , I would like it lube grooved also.

Thanks again in advance

Lakehouse2012
03-19-2021, 12:04 AM
thank you, you only put it gas checked , I would like it lube grooved also.

Thanks again in advance

Lube groove is standard, rather than the NLG. So not putting anything in that area, gives you the grooved version.

Thanks,

Postell
03-24-2021, 10:30 PM
Hi, I havent seen an email yet? Did I miss it Lakehouse?
Thanks Postell

Lonegun1894
03-24-2021, 11:02 PM
Just to confirm, #12 and #20, both are WITH lube grooves, right? Thank you.

Nevermind. I just caught that it is. I’ll go back to my corner now...

Lakehouse2012
03-24-2021, 11:22 PM
Hi Postell,

No emails sent yet, you havent missed anything. Miha is working through new package carriers (UPS and FedEx) and will hopefully have this solved by this week.


Hi, I havent seen an email yet? Did I miss it Lakehouse?
Thanks Postell

Lakehouse2012
03-24-2021, 11:24 PM
LOL - yeah that is a bit tricky but "no notation" means you are getting lube groove. They only come without grooves when you ask for NLG.


Just to confirm, #12 and #20, both are WITH lube grooves, right? Thank you.

Nevermind. I just caught that it is. I’ll go back to my corner now...

Lonegun1894
03-25-2021, 03:30 AM
LOL - yeah that is a bit tricky but "no notation" means you are getting lube groove. They only come without grooves when you ask for NLG.

Thank you very much!

Postell
03-25-2021, 06:34 AM
Hi Postell,

No emails sent yet, you havent missed anything. Miha is working through new package carriers (UPS and FedEx) and will hopefully have this solved by this week.

Thank you sir.

propwashp47
03-26-2021, 12:13 AM
i hope to get in for my first gb i wood like 1 brass 3 cav hp with all pins lg and gc + MP handles. 1 brass 6 cav brass NLG + MP handles. drichardsonataustin.rr.com

Lakehouse2012
03-26-2021, 12:22 AM
i hope to get in for my first gb i wood like 1 brass 3 cav hp with all pins lg and gc + MP handles. 1 brass 6 cav brass NLG + MP handles. drichardsonataustin.rr.com

Hi, I hope Ive got you listed in both molds correctly, Thanks!

propwashp47
03-26-2021, 11:47 AM
yes looks right . my email is wrong it is dric.rr.com thank you

Lakehouse2012
03-26-2021, 11:58 AM
yes looks right . my email is wrong it is drichardson40ataustin.rr.com thank you

Sorr, my mistake, I fixed it

ElCheapo
03-30-2021, 02:46 PM
Hope it's not too late! Can I still get an 8 cavity aluminum NLG mold? E-mail if you need it is mr22hornet@yahoo.com. Thanks! E.C.

Lakehouse2012
03-30-2021, 03:06 PM
Hope it's not too late! Can I still get an 8 cavity aluminum NLG mold? E-mail if you need it is mr22hornet@yahoo.com. Thanks! E.C.

You are on the list!! Thanks,

historicfirearms
04-04-2021, 08:52 PM
Please sign me up. 8 cavity aluminum lube groove gas check. nomadpilot77 at gmail dot com

Lakehouse2012
04-04-2021, 08:54 PM
Please sign me up. 8 cavity aluminum lube groove gas check. nomadpilot77 at gmail dot com

Yes Sir, you are on the list! Thanks

pack3480
04-08-2021, 06:08 AM
pack3480, dcasad(at)hotmail(dot)com, one 8 cavity NLG Aluminum with handles

Lakehouse2012
04-08-2021, 07:13 AM
pack3480, dcasad(at)hotmail(dot)com, one 8 cavity NLG Aluminum with handles

Thank you, I've got you on the list

slide
04-12-2021, 06:24 PM
Lakehouse2012, take me off of this one.

Lakehouse2012
04-12-2021, 07:55 PM
Lakehouse2012, take me off of this one.

ok, no problem, I removed you.

klobbermeister
04-26-2021, 08:53 AM
If it's not too late to jump in, I'm in for an 8 cav aluminum NLG with handles, please...

klobbermeister at ameritech dot net

Thanks!

Lakehouse2012
04-26-2021, 08:59 AM
If it's not too late to jump in, I'm in for an 8 cav aluminum NLG with handles, please...

klobbermeister at ameritech dot net

Thanks!

Yes Sir, I've added you to the list

Markopolo
04-26-2021, 09:07 AM
wow... this one is going LONG.. over a year. I am still hoping

Lion2017
06-03-2021, 07:19 PM
Last year I hoped to receive my 2 moulds before Christmas, now I hope to have them before the summer holydays.....:-)

Coco89
06-05-2021, 11:49 AM
Please remove and sign me up for the 65gr

PNW_Steve
06-05-2021, 12:50 PM
Did I sign up for one of these??

Somewhere I tried to get into a buy on 65-75gr .224 mould somewhere but cannot remember where........

Lakehouse2012
06-05-2021, 01:12 PM
Did I sign up for one of these??

Somewhere I tried to get into a buy on 65-75gr .224 mold somewhere but cannot remember where........#12 of this 75g, you wanted an 8-cav solid.

Is that still what you want?

Sent from my T799B using Tapatalk

rancher1913
06-05-2021, 06:07 PM
8-cav Aluminum for Solid --> nlg

rancher1913atyahoodotcom

Lakehouse2012
06-06-2021, 01:00 AM
Thanks Rancher, I've put you in slot #6 of the 8-cav with NLG


8-cav Aluminum for Solid --> nlg

rancher1913atyahoodotcom

PNW_Steve
06-07-2021, 03:42 PM
#12 of this 75g, you wanted an 8-cav solid.

Is that still what you want?

Sent from my T799B using Tapatalk

Yes.

With gas check prefered.

Lakehouse2012
06-07-2021, 09:35 PM
Yes.

With gas check prefered.

You are already in as a GC, so all set

btreanor
06-09-2021, 04:08 PM
Hi Lakehouse- I'd like to get in with an 8-cavity, solid, lube groove, gas check mould (no handles) if it's not too late. Thanks! (b t r e a n o r at h o t m a i l . c o m)

Lakehouse2012
06-10-2021, 11:53 AM
Thanks Sir, I've got you on the list!


Hi Lakehouse- I'd like to get in with an 8-cavity, solid, lube groove, gas check mould (no handles) if it's not too late. Thanks! (b t r e a n o r at h o t m a i l . c o m)

bushog
06-21-2021, 07:34 PM
Hi, Please add me for a:
8 cavity SOLID with Lube Groove and Gas Check

boo-haaa at hot maildot com

Lakehouse2012
06-22-2021, 11:02 AM
Thanks I've updated you on the list!


Hi, Please add me for a:
8 cavity SOLID with Lube Groove and Gas Check

boo-haaa at hot maildot com

propwashp47
07-15-2021, 11:13 AM
please remove me from this buy

Lakehouse2012
07-17-2021, 01:21 AM
Ok, Ive removed you.


please remove me from this buy

cainttype
07-28-2021, 08:35 AM
I’m in for an 8 cav Aluminum plain based for 65 Euro if I’m not too late.
drctml AT yahoo Dot com

Armorguy63
07-28-2021, 09:12 PM
Please add me for 6 cav Solid brass, NLG, Flat Base + handle
kshafer1@gmail.com

Lakehouse2012
07-29-2021, 11:06 PM
I’m in for an 8 cav Aluminum plain based for 65 Euro if I’m not too late.
drctml AT yahoo Dot com

You are on the list! thanks

Lakehouse2012
07-29-2021, 11:09 PM
Please add me for 6 cav Solid brass, NLG, Flat Base + handle
kshafer1@gmail.com

I've added you to the list! Welcome fellow Michigander, reach out if you want special treatment :)

ElCheapo
08-08-2021, 11:00 PM
Please remove me from this buy. Thank you!

Lakehouse2012
08-08-2021, 11:50 PM
Please remove me from this buy. Thank you!

I've removed you, thanks

mvintx
08-11-2021, 05:53 PM
Sorry Lakehouse, please remove me from this buy.

Lakehouse2012
08-13-2021, 11:52 PM
Sorry Lakehouse, please remove me from this buy.

No problem sir, I've removed you from this GB

sigep1764
08-14-2021, 10:33 AM
We have 143 molds signed up for between the 65 grain and 75 grain options. Thats a fair amount. Any news on when these things get the go ahead?

Lakehouse2012
08-18-2021, 12:33 AM
We have 143 molds signed up for between the 65 grain and 75 grain options. Thats a fair amount. Any news on when these things get the go ahead?

I'm working with Miha, dont have an absolute date from him yet but these are getting close...

archangel2003
09-14-2021, 11:11 PM
Last call was in March?
Sounds like people are still getting added to the list.
How many cavities are optioned?

Lakehouse2012
09-15-2021, 06:22 PM
Last call was in March?
Sounds like people are still getting added to the list.
How many cavities are optioned?

Yeah I know... I put last call in when the quota has reached the level that Miha has set, but when he actually builds the molds and ships is up to him, based on when he gets all the parts in stock. The 223 molds are sitting around 150 total molds, but I think he is still having a problem getting all the pins made for the HP's.

Ep55555
09-15-2021, 08:51 PM
If it’s not too late, can you add me for 8 cav Aluminum plain based NLG for 65 Euro?

Mighty_orion (at) Hotmail.com

Lakehouse2012
09-16-2021, 12:07 AM
If it’s not too late, can you add me for 8 cav Aluminum plain based NLG for 65 Euro?

Mighty_orion (at) Hotmail.com

You are good, I've got you on the list, thanks!

Ep55555
09-16-2021, 07:12 PM
Thanks!

Lakehouse2012
10-14-2021, 11:29 PM
Hi everyone,

I talked with Miha yesterday, he is very sorry for all the delay in mold production. There are 2 issues he is dealing with, his supplier of the HP pins and a general shortage (and high cost) of raw materials. It's no different in the USA, if you have tried to buy any steel lately, you are in for a real shock... 2-3 times the cost from "pre-covid" pricing.

The GOOD news is, he has a new lathe coming, is supposed to start it's voyage by sea on the 28th and once it arrives and gets setup, Miha will start making his own pins!! Soon this pin-issue will be behind us. Stay patient and keep posted.

-Lakehouse2012

Lonegun1894
10-14-2021, 11:35 PM
Thank you, Lakehouse. That’s great news.

jimlj
10-23-2021, 07:40 PM
PM sent
Add me to the list for 8 cavity aluminum no lube groves
jimlj at g mail d0t c0m

Lakehouse2012
10-23-2021, 08:38 PM
PM sent
Add me to the list for 8 cavity aluminum no lube groves
jimlj at g mail d0t c0m

Thanks, I've added you to the 8-cav in spot #17, you should be good to go.

archangel2003
10-23-2021, 09:59 PM
Hi everyone,

I talked with Miha yesterday, he is very sorry for all the delay in mold production. There are 2 issues he is dealing with, his supplier of the HP pins and a general shortage (and high cost) of raw materials. It's no different in the USA, if you have tried to buy any steel lately, you are in for a real shock... 2-3 times the cost from "pre-covid" pricing.

The GOOD news is, he has a new lathe coming, is supposed to start it's voyage by sea on the 28th and once it arrives and gets setup, Miha will start making his own pins!! Soon this pin-issue will be behind us. Stay patient and keep posted.

-Lakehouse2012

I've never needed a lathe to make guide pins unless they were an odd size, that aspect of them not be changed and there was no round stock available.
I just go someplace like McMaster Carr and order some hardened round stock (tool steel, drill rod, or whatever fits the bill) of the size needed and cut them to length.
If there are 18 molds on this order so far, that's only 36 pins.

Minerat
10-23-2021, 11:03 PM
They are not guide pins, they are the HP pins. So that is 72 pins (24*3) that have to be shaped, drilled & Tapped.