PDA

View Full Version : ACTIVE - 223/556 NATO HEAVY 75g HP or Solid - AR15 Rifle round



Pages : 1 [2]

Postell
10-25-2021, 12:02 AM
Lakehouse will you please remove me from the list sir?
7) (Postell) - 8 cav, GC - r smith otis at G ma il. c om.

Thank you, Postell

Lakehouse2012
10-26-2021, 07:08 PM
Thanks Minerat,

Additionally, Miha usually gives 2-3 sets of different pins with each set of molds, so 72 x 3 is 216. PLUS all the molds in the 65g GB are using the same cherry, so thats another 300+ pins, these two GB's are 500+ pins that are shaped to a very exact size, imagine running your lathe all day for those archange.....


I've never needed a lathe to make guide pins unless they were an odd size, that aspect of them not be changed and there was no round stock available.
I just go someplace like McMaster Carr and order some hardened round stock (tool steel, drill rod, or whatever fits the bill) of the size needed and cut them to length.
If there are 18 molds on this order so far, that's only 36 pins.


They are not guide pins, they are the HP pins. So that is 72 pins (24*3) that have to be shaped, drilled & Tapped.

Lakehouse2012
10-26-2021, 07:09 PM
Lakehouse will you please remove me from the list sir?
7) (Postell) - 8 cav, GC - r smith otis at G ma il. c om.

Thank you, Postell

No problem Sir, I've removed you.

archangel2003
11-05-2021, 11:55 PM
deleted

Lakehouse2012
11-06-2021, 01:17 AM
Thank you.

OutdoorDave
11-11-2021, 01:43 PM
Hello, any updates on our buy? Also is it possible to join the 65 grain .224 caliber group buy?

Lakehouse2012
11-11-2021, 11:39 PM
Hello, any updates on our buy? Also is it possible to join the 65 grain .224 caliber group buy?

We are still waiting to hear from Miha that the molds are being cut. Yes on the 65g, please go to that thread and post what you want.

jimlj
11-24-2021, 11:41 PM
Hey Lakehouse, can you add handles for me? #17 8 cavity al.

xiholdtruex
11-25-2021, 01:17 AM
Lakehouse can you please remove me from this groupbuy came into some financial difficulties and will not be able to purchase :( Thanks in advance

24) (xiholdtruex) - 3-cav, HP, GC - xiholdtruex at gmail dot com

Lakehouse2012
11-29-2021, 09:10 PM
Hey Lakehouse, can you add handles for me? #17 8 cavity al.

Yes Sir, I've added handles

Lakehouse2012
11-29-2021, 09:12 PM
Lakehouse can you please remove me from this groupbuy came into some financial difficulties and will not be able to purchase :( Thanks in advance

24) (xiholdtruex) - 3-cav, HP, GC - xiholdtruex at gmail dot com

Yes Sir, I'm sorry to hear. You are removed, wishing you the best.

who
12-20-2021, 09:58 PM
I would like to add a set of handles. #21, 3 cavity.
Thank you sir.

Lakehouse2012
12-21-2021, 03:15 PM
I would like to add a set of handles. #21, 3 cavity.
Thank you sir.

I've updated you to include handles, thanks!

BTW- good new coming, Miha has a delivery date on his lathe, so wont be long now

Lakehouse2012
12-21-2021, 03:27 PM
Update for everyone from Miha:

The CNC lathe to make all the pins is now on the ocean, expecting arrival at his shop of 28JAN22. This means that sometime in Feb he'll begin making all the pins. So stay tuned HP molds will start flowing again!

OutdoorDave
02-05-2022, 04:52 PM
Hello, I just wanted to check in with this buy to see what the status is.
Also, would it be possible to get in on the sixty-odd grain mould?
Thank you,
David

Lakehouse2012
02-05-2022, 08:09 PM
Hello, I just wanted to check in with this buy to see what the status is.
Also, would it be possible to get in on the sixty-odd grain mould?
Thank you,
David

I dont have any update at the moment on the GB's. If you are interested in the 65g, then make a post on that one and put all the details in it.

hades
03-08-2022, 12:57 PM
Put me down for an 8 cavity aluminum, grooved, GC with handles

Calebwilking At gee mail dot com

Lakehouse2012
03-08-2022, 01:02 PM
Put me down for an 8 cavity aluminum, grooved, GC with handles

Calebwilking At gee mail dot com

I've added you to slot #7 of the 8-cav. Thanks,

Lakehouse2012
03-21-2022, 03:02 PM
UPDATE from Miha today - He is doing good and ready to turn on the lathe for making pins this week, he expects to start working on orders this week, we are getting close!

Lion2017
03-28-2022, 05:13 PM
please add for me:
3 cav. brass HP GC with lube grooves - herrgiessviel at gmail.com

Lakehouse2012
03-29-2022, 12:19 AM
I've got you on the list! Thanks


please add for me:
3 cav. brass HP GC with lube grooves - herrgiessviel at gmail.com

zeljohn
04-07-2022, 10:55 AM
Please remove me from spot #21 on the 8 cavity list.

21) (zeljohn) - 8 cav Solid, NLG, Flat Base - zeljohnatcenturylinkdotnet

Lakehouse2012
04-07-2022, 03:34 PM
Please remove me from spot #21 on the 8 cavity list.

21) (zeljohn) - 8 cav Solid, NLG, Flat Base - zeljohnatcenturylinkdotnet

Ok, I've removed you from slot 21, but I'm leaving you on 22, correct?

glockky
04-23-2022, 03:30 PM
Plz remove me from the list thanks

Lakehouse2012
04-23-2022, 10:30 PM
Plz remove me from the list thanks

You are removed

pjh421
05-24-2022, 12:54 AM
If I'm not too late can I get an aluminum 8 cavity solid with grooves and gas check please? orig in al pjh 421 at g mail . co m Thank you!

Paul

Lakehouse2012
05-25-2022, 12:06 AM
If I'm not too late can I get an aluminum 8 cavity solid with grooves and gas check please? orig in al pjh 421 at g mail . co m Thank you!

Paul

I've add you in

Krh1326
08-02-2022, 08:07 AM
3 Cavity Hollow Point - with Gas Check Please.
Thank you
Krhenrikson at MSN dot com

Lakehouse2012
08-02-2022, 12:25 PM
3 Cavity Hollow Point - with Gas Check Please.
Thank you
Krhenrikson at MSN dot com

Thanks Sir, I've got you on the list!

bamabound
08-06-2022, 11:39 PM
8 cavity aluminum flat based and NLG with handles please

zac alldredge at gmail dot com


Sent from my iPhone using Tapatalk

Lakehouse2012
08-09-2022, 09:15 PM
Thanks, I've added you to slot #21



8 cavity aluminum flat based and NLG with handles please

zac alldredge at gmail dot com


Sent from my iPhone using Tapatalk

Dimner
08-10-2022, 10:23 AM
I didn't know if it matters, but my+handles on number 18 in the 8cav mold list is not bolded. Just thought I'd mention this in the .005% chance it would mean I didn't get handles.

Lakehouse2012
08-10-2022, 08:56 PM
I didn't know if it matters, but my+handles on number 18 in the 8cav mold list is not bolded. Just thought I'd mention this in the .005% chance it would mean I didn't get handles.

Thanks for catching that, I fixed it up!

HiVelocity
08-16-2022, 10:31 PM
WHEN?

MiHec can run all the other group buy molds without any problems.............when will we start seeing this one shipped? Maybe its time to delete all the other GB's until this one closes and all the molds are shipped.

HV

COUSIN DANIEL
08-26-2022, 10:40 PM
Any updates on when molds will ship?

sukivel
08-29-2022, 02:41 PM
WHEN?

MiHec can run all the other group buy molds without any problems.............when will we start seeing this one shipped? Maybe its time to delete all the other GB's until this one closes and all the molds are shipped.

HV

I havenít seen any other group buys shipping, and there are several that are alot older with alot more moulds on them.

Why delete them for this one? At this point none of them are getting made.


Sent from my iPhone using Tapatalk

Lonegun1894
08-29-2022, 03:08 PM
I figure none of us were promised a set delivery date, and we all joined this group buy knowing that. So while I don't like waiting, I have enough other molds to keep me busy and entertained until this one gets made.

alamogunr
08-29-2022, 03:28 PM
I have suspected , because of the shortages of all things pertaining to reloading, that Miha has been overloaded. But if nothing is shipping, maybe he is still having trouble with HP pins. Just trying to offer possibilities. I got my mold in this version 1st time around so have no part in this GB. Sorry if I have muddied the water.

Lonegun1894
08-29-2022, 03:42 PM
I have suspected , because of the shortages of all things pertaining to reloading, that Miha has been overloaded. But if nothing is shipping, maybe he is still having trouble with HP pins. Just trying to offer possibilities. I got my mold in this version 1st time around so have no part in this GB. Sorry if I have muddied the water.

Makes perfect sense to me. Thank you.

No_1
09-02-2022, 12:11 PM
WHEN?

MiHec can run all the other group buy molds without any problems.............when will we start seeing this one shipped? Maybe its time to delete all the other GB's until this one closes and all the molds are shipped.

HV


I havenít seen any other group buys shipping, and there are several that are alot older with alot more moulds on them.

Why delete them for this one? At this point none of them are getting made.


Sent from my iPhone using Tapatalk

Careful what you wish for HV - If we shut it down we will shut it ALL down, not just the ones that prevent you from getting what you want.

sukivel
09-02-2022, 02:34 PM
Careful what you wish for HV - If we shut it down we will shut it ALL down, not just the ones that prevent you from getting what you want.

Yeah I agree. We obviously donít know the whole story, but it doesnít cost us anything to be on the want list.


Sent from my iPhone using Tapatalk

Lakehouse2012
09-05-2022, 12:23 AM
Careful what you wish for HV - If we shut it down we will shut it ALL down, not just the ones that prevent you from getting what you want.

I'm talking with Miha now, no promises but he knows that we are waiting for these molds...