PDA

View Full Version : ACTIVE - 223/556 NATO 65g HP or Solid - AR15 Rifle round



Pages : [1] 2

Lakehouse2012
03-20-2020, 05:03 PM
LAST CALL on 07MAR2021


- Casting at .227
- HP or Solid (you choose)
- Flat Base or Gas Check (you choose)
- Grooved or NLG (you choose)
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys are included
- RCBS/Lyman top punch is included
- Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +$20)
-Sample of sprue lube is included (15ml)

Pins included will be at a MINIMUM of: Large round, Small round and a blank pin.

65 grains as a Solid w/grooves
66 grains as a Solid NLG
63 grains as an HP w/grooves
64 grains as an HP NLG

The OAL length is 0.656" and top of top driving band Meplat to first band 0.407"

Click image for larger version.

258850

Mold Choices and Pricing


Changes in RED
- 3-cav Brass for HP (from 2-cav block) --> 85 Euro
- 6-cav Brass for Solid --> 65 Euro
- 8-cav Aluminum for Solid --> 65 Euro


NEW SHIPPING DETAILS

shipping is approximately 16 euros for first mold.

If you purchase 2 molds it is 18 euros (for both)

if you take 3 molds shipping is approx 20 euros....

Shipping is with DHL, these are live rates AND CAN CHANGE UP OR DOWN

GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.

Group Buy List

3 cavity HP (Brass mold) (Lube groove or NLG) with (Flat base or Gas Check)
1) (Lakehouse2012) - 3-cav, HP, GC - sorgatz At ameritech d0t net (Honcho mold)
2) (jessdigs) - Brass 3 cav, HP, NLG, GC +handles - jessdigs at Gmail dot com
3) (bpatterson84) - 3 cav, HP, GC - rocpyro at gmail. 76116
4) (Minerat) - 3 cav, HP, NLG, GC - SteveOB at outdrs dot net
5) (Wasalmonslayer) - 3 Cav brass HP, GC - Max at yvmarine dot com.
6) (SeabeeMan) - 3 cav, HP, GC +handles - rich underscore kildow at hotmail dot com
7) (Krh1326) - 3 Cav HP - GC - Krhenrikson at MSN dot com
8) (Master Samwise) - Brass 3 cav, HP, NLG - shonnold at hot mail dot com
9) (2manyToys) - 3-cavity, HP, NLG, FB - tmain99 at g mail dot com
10) (2manyToys) - 3 cavity, HP, NLG, GC - tmain99 at g mail dot com
11) (huntnman) -3 cav HP, GC - huntnman(at)swbell(dot)net
12) (Brick85) - 3 cav HP, GC - house of tang at yahoo dotcom
13) (Teemu) - 3-cavity Brass, Grooved, HP, GC - teelep75 At gmail d0t com
14) (tja6435) - 3cav, HP, GC, lube groove +handles - Tja6435 at gmail dot com
15) (davidh0302) - 3 cavity HP NLG flat base mold. +handles - dh03021991 at gmail dot com
16) (davidh0302) - 3 cavity HP NLG flat base mold. +handles - dh03021991 at gmail dot com
17) (HiVelocity) - 3 cav, HP, FB - HiVelocityzerothree@Aol.com
18) (HiVelocity) - 3 cav, HP, NLG - HiVelocityzerothree@Aol.com
19) (Markopolo) - 3 cav, HP, lube groove, gas check, all pins - f i g e l s k i at y a h o o dot c o m
20) (KMac) - 3 cav, HP, GC All Pins - kevmcclain at gmail dot com
21) (coog83) - 3 cavity HP, Grooved, GC - kpatton at take2 dot us
22) (coog83) - 3 cavity HP, NLG, FLAT - kpatton at take2 dot us
23) (Double D) - 3 cav, HP, GC - l t c d u g g i n s (AT) gmail dot com
24) (kywoodwrkr) - 3-cav, HP, GC - kywoodwrkr at yahoo dot com
25) (bronte454) - 3-cav lube groove, GC, HP +handles - thadd3220 at yahoo dot com
26) (jmcghee) - 3-cav brass,HP, NLG - jamesallen1954@gmail,com
27) (Cowhide) - 3-cav Brass, HP all pins, Flat Base, Grooved +handles - mdsleatherworks4u AT gmail d0t com
28) (kodiakken) - 3-cav lube groove, GC, HP +handles - kodiakken at gmail dot com
29) (Dieselhorses)- 3 cav HP, NLG, FB +handles - Way2kajun at Yahoo dot com
30) (Wolfdog91) - 3-cav, HP, NLG, GC - wolfdogmcdowell91 At gmail dot com
31) (Boomsticks Firearms) - 3 cav HP LG GC - boomsticks firearms at lowcountry dot com
32)
33) (Humbo) - 3 Cav brass HP GC w/ lube groove - bardisattva at gmail dot com
34) (Evoken) - 3-cav HP, GC, NLG, +handles - kshj31 At yahoo dot com
35) (Coco89) - 3-cav, HP, NLG, - wireless288 gmail
36) (Moromane) - 3-cav, brass, HP, GC + handles - Moromane1992 at geemail dotcom
37) (Lion2017) - 3 cav, brass HP, GC - herrgiessviel at gmail.com
38) (bushog) - 3 cavity HP NLG flat base mold - boo-haaa athot mail dotcom
39) drfroglegs) - 3-Cav HP, NLG, GC +handles - Drfroglegs at yahoo dot com
40) (btr-cj) - 3 Cav HP, NLG, FB - btrcjAtCoxDOTnet
41)
42)
43) (OutdoorDave) - 3 cav brass, HP with all pins, GC - little black lab at gmail dot com
44)
45)
46)



6 cavity Solid (Brass mold) (Lube groove or NLG) with (Flat base or Gas Check)
1) (jessdigs) - brass 6 cav, NLG, GC +handles- jessdigs at Gmail dot com
2) (Lion2017) 6 cav, GC - herrgiessviel at gmail.com
3) (ilium) - 6 cav brass, solid, NLG +handles - iliumconst at gmail dot com
4) (dimaprok) - 6 cav, GC - dimaprok at gmail dot com
5) (Steve390Gold6) - 6 cav, GC +handles - Nelson390 at hotmail dot com
6) (DanInCt) - 6 cav, GC - daneschner at g mail dot com
7) (gvrj) - 6 cav, NLG, FB - george at rayclan dot net
8) (blasternank) - 6 cav, Brass Solid NLG Gas check - trockroofingatgmaildotcom
9) (Stewbaby) - 6 cavity solid GC, +handles - Cstewy96 at gmail dot com
10) (ryanmattes) - 6 cav Solid NLG +handles - ryanmattes@gmail.com
11) (Cave) - 6-cav, GC 6cav +handles - j.huntblelectrical At yahoo d0t com
12) (Whitecobra) - 6 cav, NLG, Flat Base - whitecobra_1997 at msn.com.
13) (BK7saum) - 6 cav brass, NLG, GC - Bradleyk4860 at gmail dot
14) (SoonerEd) - 6 cav, lube groove, gas check - Ed at trilogy-health dot com.
15) (Armorguy63) - 6-Cav, NLG, FB - +handles - kshafer1 At gmail d0t com
16) (1I-Jack) - 6-cav, GC +handles - nw_trader at hotmail.com
17) (Ziptar) - 6 cav brass, GC - ziptar at geemail dot com
18) (hades) - 6-cav brass, GC +handles - Calebwilking at geemail COM
19) (RogerDat) - 6 cav w/lube grooves, GC - drccac at zoomon,net
20) (Redline) - 6 cav, NLG, FB +handles - redlinemeister at gmail dot com
21) (MisterStyx) - 6 cav, NLG, FB +handles - Ryan.Montie at gmail dot com.
22)
23)
24)
25)


8-cav (Aluminum mold) (Lube groove or NLG) with (Flat base or Gas Check)
1) (rancher1913) 8 cav, NLG - rancher1913atyahoodotcom
2) (millsa2) - 8-cav Alum Solid grooved, GC - millsa2 at comcast dot net
3) (millsa2) - 8-cav Alum Solid grooved, GC - millsa2 at comcast dot net
4) (Dapaki) - 8 cav, NLG - spamento at gmail dot com
5) (Master Samwise) - 8 cav, NLG - shonnold at hot mail dot com
6) (Plate plinker) - 8 cav, NLG - plateplinker @ gmail dot com
7) (jwoolley) - 8 cav NLG GC - jwoolley1987 at gmail dot com
8) (kbstenberg) - 8 cav, Grooved, FB - k b s t e n 1 at a r v i g dot n e t
9) (Kawacharles) - 8 cav, NLG - kawacharles1973 at g mail dot com
10) (pjh421) - 8 cav with grooves, GC - originalpjh421 AT g mail dot com
11) (Olsmoky) - 8 cavity NLG Flat base, + Handles - olsmoky95 at gmail.com
12) (Olsmoky) - 8 cavity NLG Flat base, + Handles - olsmoky95 at gmail.com
13) (Lloyd Smale) - 8 cav grooved, GC - lws43 at hotmail.com
14) (Sleeping Dog) - 8 Solid, GC, NLG - eric at sleepingdogammo dot com
15) (blasternank) - 8-cav Alum Solid grooved GC - trockroofingatgmaildotcom
16)
17) (Mr Poison ivy) - 8-cav, NLG, FB + Handles- Garlandivy at Gmail dot com
18) (Mr Poison ivy) - 8-cav, NLG, FB + Handles- Garlandivy at Gmail dot com
19) (greekman) - 8-cav, NLG, FB, 2 sets of handles - greekman1122 at yahoo dot com
20) (pack3480) - 8-cav Alum solid GC, LG +handles - dcasad(at)hotmail(dot)com
21) (pack3480) - 8-cav Alum solid NLG, Flat Base +handles - dcasad(at)hotmail(dot)com
22) (bushog) - 8 cav aluminum solid NLG flat base - boo-haaa athot mail dotcom
23) (NYBushBro) - 8-cav alum, GC - mopedmedic AT hotmail DOT com.
24) (drfroglegs) - 8 cav NLG, FB with +handles - Drfroglegs at yahoo dot com
25) (cainttype) - 8 cav Alum, GC - drctml AT yahoo DOT com
26) (COUSIN DANIEL) - 8 cav alum, NLG - DanielRiggs2020 At gmail dotcom
27)
28)
29)

Lakehouse2012
03-31-2020, 01:55 PM
Guys,

Made changes to block types, see text in RED.

Thanks,

LH

bronte454
04-05-2020, 09:13 PM
Could I get some numbers on this bullet as a HP the length and top of top driving band ? I have a Taurus Raging Hornet that is screaming for a bullet somewhat like this . For some strange reason Taurus chose to put a barrel with a 1in 9 twist .

Lakehouse2012
04-06-2020, 09:13 AM
Could I get some numbers on this bullet as a HP the length and top of top driving band ? I have a Taurus Raging Hornet that is screaming for a bullet somewhat like this . For some strange reason Taurus chose to put a barrel with a 1in 9 twist .

The OAL length is 0.656" and top of top driving band Meplat to first band 0.407"

Teemu
04-10-2020, 11:43 PM
Can I have: Brass 3-cav. with lube groove GC/HP. 1 mold. paska_10 AT hotmail.com

-Teemu
Thanks

AlHunt
04-12-2020, 08:32 AM
I'm going to subscribe to this thread. I'm interested in a 3 cavity mold but if but if it takes months and months to pan out I'll forget I've committed.

ORDERED IT IN POST 18

Lakehouse2012
04-13-2020, 05:36 PM
Hi Guys,

I'm watching your posts and see the interest, but I'm waiting to hear back from Miha with the cost, before I start putting folks on the list. Hope to get this info soon.

Thanks,

LH2012

hermans
04-16-2020, 12:35 PM
Lakehouse2012,

PM inbound

jessdigs
04-18-2020, 04:26 PM
I have been waiting for this one.
I would like 1 brass 3 cavity NLG HP
And
1 brass 6 cavity solid NLG

2 molds
jessdigs at Gmail dot com

Sent from my Pixel 4 XL using Tapatalk

rancher1913
04-18-2020, 06:21 PM
8 cavity SOLID (Aluminum mold) ( NLG) with (Flat base)

rancher1913atyahoodotcom

slide
05-12-2020, 11:43 AM
8 cavity solid aluminum mold, grooved with flat base.
bennyritteratyahoodotcom

bpatterson84
05-19-2020, 09:50 AM
Yea, Id go for a NLG 3 cavity Hollowpoint, flat base. Like was said before, would be interesting for a Hornet.

rocpyro at gmail. 76116.

Lakehouse2012
06-08-2020, 01:25 PM
Pricing and shipping information is now updated in post #1. Please review and make sure you are still on board, I am then going to start updating the list of buyers.

Lakehouse2012
06-08-2020, 01:55 PM
I have been waiting for this one.
I would like 1 brass 3 cavity NLG GC HP
And
1 brass 6 cavity solid NLG GC

2 molds
jessdigs at Gmail dot com

Sent from my Pixel 4 XL using Tapatalk

Jessdigs- I'm updating the list and see you have NLG and GC.... Unfortunately this can't be. If you choose NLG, Miha does a seconday operation, to machine all the grooves out, including the step for the GC. So you wold have to choose between the two.

AlHunt
06-08-2020, 02:06 PM
Does anyone have an opinion about this bullet stabilizing in a 1:9 twist? I noticed someone on the 75 grain thread thought that 1:9 was too fast for that bullet.

Lakehouse2012
06-08-2020, 02:20 PM
Does anyone have an opinion about this bullet stabilizing in a 1:9 twist? I noticed someone on the 75 grain thread thought that 1:9 was too fast for that bullet.

The 65g would work well for a 1:9 if you are not pushing to the max powder load. and depending on coating or a GC

Lakehouse2012
06-08-2020, 02:25 PM
I've updated everyone who made a request, so this thread is up to date. However there is one that needs to update their choices.




Yea, Id go for a NLG 3 cavity Hollowpoint, flat base. Like was said before, would be interesting for a Hornet.

rocpyro at gmail. 76116.


8 cavity solid aluminum mold, grooved with flat base.
bennyritteratyahoodotcom


8 cavity SOLID (Aluminum mold) ( NLG) with (Flat base)

rancher1913atyahoodotcom


I have been waiting for this one.
I would like 1 brass 3 cavity NLG GC HP
And
1 brass 6 cavity solid NLG GC

2 molds
jessdigs at Gmail dot com

Sent from my Pixel 4 XL using Tapatalk


Can I have: Brass 3-cav. with lube groove GC/HP. 1 mold. paska_10 AT hotmail.com

-Teemu
Thanks

AlHunt
06-08-2020, 04:14 PM
The 65g would work well for a 1:9 if you are not pushing to the max powder load. and depending on coating or a GC

Thanks for the response. Powder coat / Gas check over 24.8 of W748 with a 55 grain cast is what I'm loading now. I'm going to jump on board here.

3 Cavity/Brass/HP/GC - Maine Partnership AT Gmail dot com

Lakehouse2012
06-08-2020, 10:24 PM
Ok, thanks. you will like this boolit alot :) I've got you on the list.

Lakehouse2012


Thanks for the response. Powder coat / Gas check over 24.8 of W748 with a 55 grain cast is what I'm loading now. I'm going to jump on board here.

3 Cavity/Brass/HP/GC - Maine Partnership AT Gmail dot com

Wasalmonslayer
06-10-2020, 01:28 AM
Hey amigo throw me in for a 3 Cav brass HP GC
Max at yvmarine dot com.

Thank you!

jessdigs
06-10-2020, 10:54 PM
Jessdigs- I'm updating the list and see you have NLG and GC.... Unfortunately this can't be. If you choose NLG, Miha does a seconday operation, to machine all the grooves out, including the step for the GC. So you wold have to choose between the two.Nlg please. Not worried about gc as I will be powder coating. Thanks

Sent from my Pixel 4 XL using Tapatalk

Lakehouse2012
06-11-2020, 12:12 AM
Hey amigo throw me in for a 3 Cav brass HP GC
Max at yvmarine dot com.

Thank you!

Yes Sir, I've got you up there! Thanks :) BTW Storms ran through here and power is out at both the LH and Home..... Noisy generator power tonight...

Lakehouse2012
06-11-2020, 12:13 AM
Nlg please. Not worried about gc as I will be powder coating. Thanks

Sent from my Pixel 4 XL using Tapatalk

Cool Jess, I've updated your request, thanks for the update!

Stmtrn
06-11-2020, 11:13 PM
3 cavity with grooves and gas check, all pins. Thanks. Bbenj1967@ g mail dot com

Lakehouse2012
06-11-2020, 11:30 PM
Thank you Sir, I've got you on the list!


3 cavity with grooves and gas check, all pins. Thanks. Bbenj1967@ g mail dot com

Teemu
06-12-2020, 12:56 AM
I need to get off this group buy. Sorry. This current situation eats all my additional funds. I'm first at 3-cavity list. Thanks.

Lakehouse2012
06-12-2020, 08:29 AM
I completely understand. You are removed from the GB


I need to get off this group buy. Sorry. This current situation eats all my additional funds. I'm first at 3-cavity list. Thanks.

Kawacharles
06-17-2020, 12:06 PM
8 cavity SOLID Aluminum mold, NLG, GC

kawacharles1973 at g mail dot com

flyingmonkey35
06-17-2020, 01:06 PM
I'll take a
3 cavity HP (Brass mold) NLG with no Gas Check

Nolesen1 at gmail.com

Sent from my SM-G960U using Tapatalk

Lakehouse2012
06-17-2020, 10:41 PM
Kawa- Miha can't do the NLG with a GC. His process of machining, cleans out all grooves with a secondary machining process for the NLG and the GC groove has to go as well. Let me know if you would prefer NLG with a FB or you want the grooves in order to get the GC.


8 cavity SOLID Aluminum mold, NLG, GC

kawacharles1973 at g mail dot com

Lakehouse2012
06-17-2020, 10:43 PM
Thanks Sir, I've got you on the list!


I'll take a
3 cavity HP (Brass mold) NLG with no Gas Check

Nolesen1 at gmail.com

Sent from my SM-G960U using Tapatalk

Dapaki
06-30-2020, 08:10 PM
Please add a 8 cavity SOLID Aluminum mold, NLG) with Flat base for me please.

spamento at gmail dot com

Lakehouse2012
07-05-2020, 11:02 PM
Thanks, I've added you to the list!


Please add a 8 cavity SOLID Aluminum mold, NLG) with Flat base for me please.

spamento at gmail dot com

Master Samwise
07-07-2020, 01:31 PM
( Master Samwise ) - Brass 3 cav, NLG, HP , (Flat base)
- shonnold at hot mail dot com

( Master Samwise ) - 8 cav, NLG, (Flat base)
- shonnold at hot mail dot com

*Disregard please* ANY CHANCE OF A SLIGHT BEVELED BASE ON THESE? I sometimes a get a little burr on my plain base and it drives me crazy.

Lakehouse2012
07-08-2020, 01:18 AM
Unfortunately it wont machine up that way. Being NLG means all the internals of the cavity get removed during a secondary operation.

Sorry. Let me know if you still want in with the FB from the NLG.


( Master Samwise ) - Brass 3 cav, NLG, HP , (Flat base)
- jessdigs at Gmail dot com

( Master Samwise ) - 8 cav, NLG, (Flat base)
- shonnold at hot mail dot com

ANY CHANCE OF A SLIGHT BEVELED BASE ON THESE? I sometimes a get a little burr on my plain base and it drives me crazy.

Dimner
07-09-2020, 04:43 PM
I'm in for 2.


(dimner) - 6 cav SOLID, NLG, FB - dimner at gmail dot com
(dimner) - 6 cav SOLID, GC - dimner at gmail dot com

thanks!

Lakehouse2012
07-09-2020, 07:41 PM
Thanks Sir, I've added you onto the list.



I'm in for 2.


dimner - 8 cav SOLID (Aluminum mold) - (NLG) - (Flat base) - dimner at gmail dot com
dimner - 8 cav SOLID (Aluminum mold) - (with grooves) - (Gas Check) dimner at gmail dot com

Lakehouse2012
07-27-2020, 03:46 PM
This one has been moved to active, as it has the required buyers.

Dapaki
07-27-2020, 08:29 PM
Double, WHOOT!!

AlHunt
08-02-2020, 04:59 PM
How many buyers does this one need before it goes to production?

Lakehouse2012
08-03-2020, 12:17 AM
How many buyers does this one need before it goes to production?

technically its 25 of the HP molds, but Im working with Miha on getting him to combine the 65g and 75g because they would use the same HP pins. If this works out, there are enough to take this in to last call.

However- Miha hasnt returned my call yet, for us to finalize this. I'll try him again tomorrow. Stay tuned.

Lion2017
08-03-2020, 06:07 PM
Is it possible to scale the design down to .224 in soft lead?

Lakehouse2012
08-03-2020, 08:18 PM
Master Samwise - Thanks for the PM to remind me to update your molds, I've added you in on both of them.

Regarding the BB with the NLG (I may have already answered, but just in case) When Miha runs a secondary cutter into the mold, to remove the lube grooves, it also removes any bevel that may exist. Sorry but with this GB I cant offer a BB.


( Master Samwise ) - Brass 3 cav, NLG, HP , (Flat base)
- shonnold at hot mail dot com

( Master Samwise ) - 8 cav, NLG, (Flat base)
- shonnold at hot mail dot com

*Disregard please* ANY CHANCE OF A SLIGHT BEVELED BASE ON THESE? I sometimes a get a little burr on my plain base and it drives me crazy.

Lakehouse2012
08-03-2020, 08:22 PM
Send me a PM with what you are trying to accomplish please. This mold will easily size down to .224, whether you use soft or hard lead.

Likewise, if you pour 99% PB you will automatically get smaller bullets due to shrink. But I'm not certain why you would want to run pure in a higher powered load. Send that PM and we can talk more offline.


Is it possible to scale the design down to .224 in soft lead?

2manyToys
08-04-2020, 03:36 PM
Please add me to the list for a brass 3-cavity, NLG, FB
tmain99 at g mail dot com.

Lakehouse2012
08-04-2020, 03:41 PM
Great, I've added you to the list, thanks!!


Please add me to the list for a brass 3-cavity, NLG, FB
tmain99 at g mail dot com.

Dimner
08-11-2020, 03:17 PM
Were you able to combine the 75 and 65 grain mold orders?

Lakehouse2012
08-11-2020, 11:10 PM
I spoke with Miha last week and have the question into him, he was going to check the geometry and get back to me. But Europe is on Holiday until next week, so I dont expect to get a response until sometime next week. I promise, as soon as I get an answer I'll let you all know.

BTW- I see your post on the other thread, you need to put a disguized email on your post. Will you edit please and add that in and I'll add you to the list.

Thanks,
Lakehouse2012


Were you able to combine the 75 and 65 grain mold orders?

Dimner
08-12-2020, 12:04 AM
I spoke with Miha last week and have the question into him, he was going to check the geometry and get back to me. But Europe is on Holiday until next week, so I dont expect to get a response until sometime next week. I promise, as soon as I get an answer I'll let you all know.

BTW- I see your post on the other thread, you need to put a disguized email on your post. Will you edit please and add that in and I'll add you to the list.

Thanks,
Lakehouse2012

oh der... of course. I will do that now. thanks for the heads up on that.

Lion2017
08-12-2020, 05:52 PM
please: 1 brass 6 cavity solid grooves GC herrgiessviel at gmail.com

Lakehouse2012
08-12-2020, 11:13 PM
please: 1 brass 6 cavity solid grooves GC herrgiessviel at gmail.com

Thanks Lion, Ive added you to the list

Plate plinker
08-17-2020, 05:31 PM
2 - 8 cavity NLG
plateplinker @ gmail dot com

Lakehouse2012
08-17-2020, 08:56 PM
Thanks, I've got you on the list twice.


2 - 8 cavity NLG
plateplinker @ gmail dot com

Dimner
08-20-2020, 01:00 AM
Can I be a pain and ask you to switch me from the 8 cav aluminum to the 6 cav brass for both of my molds? Let me know if you want me to update my original post. Thanks!

Lakehouse2012
08-20-2020, 09:50 AM
No worries, I've modified yours. Yes will you now modify your original post, just so I can keep my records straight. Thanks!!


Can I be a pain and ask you to switch me from the 8 cav aluminum to the 6 cav brass for both of my molds? Let me know if you want me to update my original post. Thanks!

Dimner
08-20-2020, 01:11 PM
original post updated. thanks again :)

jessdigs
09-04-2020, 11:52 PM
I do want handles and forgot to indicate that in this GB. Is that something that gets added when we pay, or do I need to indicate that when signing up like In the 47-70 pinker? New to GB, thanks


Sent from my iPhone using Tapatalk Pro

Lakehouse2012
09-05-2020, 12:00 AM
no problem, just tell me how many you want. I see you are signed up for a solid and an HP. I put you on for a set with the HP, let me know if you want another set for the solid.


I do want handles and forgot to indicate that in this GB. Is that something that gets added when we pay, or do I need to indicate that when signing up like In the 47-70 pinker? New to GB, thanks


Sent from my iPhone using Tapatalk Pro

jessdigs
09-05-2020, 12:34 AM
no problem, just tell me how many you want. I see you are signed up for a solid and an HP. I put you on for a set with the HP, let me know if you want another set for the solid.Yes I do, two sets please. One for each

Sent from my Pixel 4 XL using Tapatalk

Lakehouse2012
09-08-2020, 04:12 PM
Sorry so slow- I've modified your request for 2 sets of handles.


Yes I do, two sets please. One for each

Sent from my Pixel 4 XL using Tapatalk

Lakehouse2012
09-11-2020, 01:08 AM
Hi guys,

Just talked to Miha, The 65 and 75 pins CAN be combined into same setup. So I expect to see this go into closed soon, stay tuned in....

2manyToys
09-24-2020, 04:19 PM
Please put me down for a 3 cavity, HP, NLG, GC brass mold. tmain99 at g mail dot com. (In addition to the 3 cavity, HP, NLG PB added earlier) Thanks

Lakehouse2012
09-24-2020, 06:38 PM
Please put me down for a 3 cavity, HP, NLG, GC brass mold. tmain99 at g mail dot com. (In addition to the 3 cavity, HP, NLG PB added earlier) Thanks

Awesome, I've got you on the list twice now. Thanks

Steve390Gold
09-25-2020, 01:50 AM
Put me down for a 6 cavity, brassmould with gas check and handles.

Nelson390 at hotmail dot com

Lakehouse2012
09-25-2020, 10:25 AM
Put me down for a 6 cavity, brassmould with gas check and handles.

Nelson390 at hotmail dot com

Thanks Sir, I've got you on the list!

slide
09-29-2020, 07:20 PM
Hey, could you change mine to an 8 cavity aluminum NLG flat base.

Lakehouse2012
09-29-2020, 11:23 PM
Hey, could you change mine to an 8 cavity aluminum NLG flat base.

Yes Sir, all fixed up.

Brick85
09-30-2020, 10:20 PM
Are the HP pins more for accuracy or for expansion?

Lakehouse2012
09-30-2020, 11:12 PM
Are the HP pins more for accuracy or for expansion?

Expansion for sure

DanInCt
10-01-2020, 09:12 PM
6 cav for 65 grain + groove gas check. daneschner at g mail dot com

Lakehouse2012
10-01-2020, 10:33 PM
6 cav for 65 grain + groove gas check. daneschner at g mail dot com

Thanks Dan, I've got you added!

Brick85
10-02-2020, 11:13 PM
Is there any reason you couldn't use PC or Hi-Tek on a boolit with the lube groove? Have never cast for a rifle with a gas port.

Lakehouse2012
10-02-2020, 11:29 PM
Is there any reason you couldn't use PC or Hi-Tek on a boolit with the lube groove? Have never cast for a rifle with a gas port.There is no reason, in fact all my boolits with Hitek are lube groove


Sent from my SM-A102U using Tapatalk

Dsltech1
10-03-2020, 12:41 AM
8 cavity aluminum NLG flat base.
C dot Byers92 at hotmail dot com

huntnman
10-03-2020, 02:09 AM
lube groove, 3 cavity hp, gas check, one for huntnman(at)swbell(dot)net

Brick85
10-03-2020, 06:41 PM
Please put me on the list for a 65gr 3 cav HP gas checked mould. Thanks! house of tang at yahoo dotcom

Lakehouse2012
10-03-2020, 11:58 PM
lube groove, 3 cavity hp, gas check, one for huntnman(at)swbell(dot)net

I've got you on the list, thanks!!

Lakehouse2012
10-04-2020, 12:00 AM
Please put me on the list for a 65gr 3 cav HP gas checked mould. Thanks! house of tang at yahoo dotcom

I've got you on this GB, Thanks!!

Brick85
10-04-2020, 08:23 AM
Please also put me down for one set of mould handles. Thanks!

Lakehouse2012
10-04-2020, 09:31 PM
Please also put me down for one set of mould handles. Thanks!

Awesome, I've updated you.

kbstenberg
10-06-2020, 09:03 AM
I can't fight it any longer. Can i have an 8 cavity, lube groove with GC please. k b s t e n 1 at a r v i g dot n e t

Lakehouse2012
10-06-2020, 11:45 AM
[smilie=w:

Thanks, you are on the list!


I can't fight it any longer. Can i have an 8 cavity, lube groove with GC please. k b s t e n 1 at a r v i g dot n e t

2manyToys
10-06-2020, 04:12 PM
Any idea of when the group buy will close?

Lakehouse2012
10-06-2020, 04:43 PM
Any idea of when the will close?

I dont have a date, but at the rate these have been ordering, I would suggest soon. I will call Miha in the next few days and get an update.

Kawacharles
10-07-2020, 06:11 AM
8 cavity SOLID Aluminum mold, NLG

kawacharles1973 at g mail dot com

Lakehouse2012
10-07-2020, 08:46 AM
8 cavity SOLID Aluminum mold, NLG

kawacharles1973 at g mail dot com

Thankyou, you are on the list!

Lakehouse2012
10-08-2020, 11:03 PM
8 cavity aluminum NLG flat base.
C dot Byers92 at hotmail dot com

I apologize for missing your post, thank you for PM'ing me and reminding me. You are now on the list!

Brick85
10-10-2020, 06:53 AM
I will still take the mould but have asked for the handles to be included with then.359 mould. So for this thread, please remove my request for the handles and I would like just the mould. Thank you and sorry for all the rearranging of requests! If these are all done before the election maybe I will ask for them shipped together just to throw another wrench in the works!

Lakehouse2012
10-11-2020, 08:24 PM
I will still take the mould but have asked for the handles to be included with then.359 mould. So for this thread, please remove my request for the handles and I would like just the mould. Thank you and sorry for all the rearranging of requests! If these are all done before the election maybe I will ask for them shipped together just to throw another wrench in the works!

Ok Brick, I've updated your request, to remove handles from this order.

Dsltech1
10-11-2020, 09:06 PM
I apologize for missing your post, thank you for PM'ing me and reminding me. You are now on the list!

Thank you

Teemu
10-12-2020, 01:11 AM
Can I have one mold. 3-cavity Brass, Grooved, HP, GC. Thanks.
paska_10 at hotmail.com

-Teemu

Lakehouse2012
10-12-2020, 10:39 AM
Can I have one mold. 3-cavity Brass, Grooved, HP, GC. Thanks.
paska_10 at hotmail.com

-Teemu

I've added you on the list, thanks!

tja6435
10-15-2020, 05:37 PM
Id like a 3cav HP GC lube groove
1 set of handles

Tja6435 at gmail dot com

Thanks

Lakehouse2012
10-15-2020, 10:25 PM
I’d like a 3cav HP GC lube groove
1 set of handles

Tja6435 at gmail dot com

Thanks

I've added you onto the list.

Dimner
10-24-2020, 03:20 PM
Mr kind sir, lakehouse....

Can you please remove the following from the list? Note: I am still in for the NGL mold. Thanks!

4) (dimner) - 6 cav SOLID, GC - dimner at gmail dot com

Lakehouse2012
10-24-2020, 04:40 PM
Thanks, I've updated you.


Mr kind sir, lakehouse....

Can you please remove the following from the list? Note: I am still in for the NGL mold. Thanks!

4) (dimner) - 6 cav SOLID, GC - dimner at gmail dot com

davidh0302
10-31-2020, 03:07 AM
I'm in for two 3 cavity HP NLG flat base molds. Plus two pairs of handles.

dh03021991 at gmail dot com

As allways, great group buy option!
Thanks a lot!!!

Gesendet von meinem HTC U11 plus mit Tapatalk

Lakehouse2012
11-01-2020, 08:59 AM
Thanks David, I've got you on the list!


I'm in for two 3 cavity HP NLG flat base molds. Plus two pairs of handles.

dh03021991 at gmail dot com

As allways, great group buy option!
Thanks a lot!!!

Gesendet von meinem HTC U11 plus mit Tapatalk

iMigraine
11-22-2020, 12:21 AM
Thanks to the Rona & Biden, I can't find any .223 fmj bullets. So I'll take one, 8 cavity Aluminum solid, NLG, flatbase please.

i m i g r a i n e AT gmail dot com

Lakehouse2012
11-22-2020, 12:31 AM
I hear ya! I've added you to the list, Thank you Sir!


Thanks to the Rona & Biden, I can't find any .223 fmj bullets. So I'll take one, 8 cavity Aluminum solid, NLG, flatbase please.

i m i g r a i n e AT gmail dot com

backriver
11-28-2020, 01:50 PM
Looks Great. 8 cavity Aluminum solid NLG, flatbase
healthAThughes.net

AlHunt
11-28-2020, 05:36 PM
Any update on the pin situation? Last I recall Miha couldn't get pins and was considering buying a lathe to do them himself. He must be backing up, big time.

Not trying to push. Really. Not at all.

Are we there yet?

Lakehouse2012
11-28-2020, 07:27 PM
Thanks Backriver, I've added you on to the GB


Looks Great. 8 cavity Aluminum solid NLG, flatbase
healthAThughes.net

Hi AlHunt, yeah you have the latest that I do right now, Miha wasn't able to get that used lathe, so he is ordering a new one from Korea to get the pin business back on track... Hang in there :)


Any update on the pin situation? Last I recall Miha couldn't get pins and was considering buying a lathe to do them himself. He must be backing up, big time.

Not trying to push. Really. Not at all.

Are we there yet?

AlHunt
11-28-2020, 07:30 PM
Hi AlHunt, yeah you have the latest that I do right now, Miha wasn't able to get that used lathe, so he is ordering a new one from Korea to get the pin business back on track... Hang in there :)

Appreciate the update. Good to know he has a plan and is moving forward.

Dimner
11-28-2020, 07:58 PM
What are the chances we can move forward just the solid molds? Am I correct in assuming that it.is the HP pins that are the bottle neck?

With the solid molds in this group buy....and the NATO Heavy 75gr, that is still quite a bit of molds..maybe worth his time?

backriver
11-29-2020, 10:28 PM
Lakehouse2012
Sorry I have to withdraw from the group buy.
Maybe next time I'll be able to participate.

Lakehouse2012
11-29-2020, 11:47 PM
What are the chances we can move forward just the solid molds? Am I correct in assuming that it.is the HP pins that are the bottle neck?

With the solid molds in this group buy....and the NATO Heavy 75gr, that is still quite a bit of molds..maybe worth his time?

Hi Dimner,

There is a 25 mold minimum to make it worth Miha's time so unfortunately I dont believe he would run this in solid only.

Lakehouse2012
11-29-2020, 11:48 PM
Lakehouse2012
Sorry I have to withdraw from the group buy.
Maybe next time I'll be able to participate.

No problem backriver, I've removed you from the buy.

HiVelocity
12-02-2020, 02:04 AM
Lakehouse2012-

I would like to jump into the group buy, sir:

3 cav, HP, FB, NLG, Quantity of 1 each; HiVelocityzerothree@Aol.com

HV

Lakehouse2012
12-02-2020, 09:04 AM
Morning Sir, I think I have your request documented correctly, please verify.

Thanks!


Lakehouse2012-

I would like to jump into the group buy, sir:

3 cav, HP, FB, NLG, Quantity of 1 each; HiVelocityzerothree@Aol.com

HV

Markopolo
12-02-2020, 09:49 AM
i would like one please...

HP 3 cav brass lube groove gas check all pins

f i g e l s k i at y a h o o dot c o m

Lakehouse2012
12-02-2020, 10:53 AM
Awesome, I've got you on the list.

Thanks,


i would like one please...

HP 3 cav brass lube groove gas check all pins

f i g e l s k i at y a h o o dot c o m

Olsmoky
12-03-2020, 12:19 PM
2-8 cavity NLG Flat base, + Handles

Just asking do these come with sprue cutter handle

olsmoky95@gmail.com

Lakehouse2012
12-03-2020, 08:48 PM
Thanks again!! :)

Yes, all the 8-cav's you put in for today come with the sprue cutter handle.


2-8 cavity NLG Flat base, + Handles

Just asking do these come with sprue cutter handle

olsmoky95@gmail.com

Lloyd Smale
12-06-2020, 07:47 AM
one alum 8 cav grooved gas check. lws43athotmail.com

Lakehouse2012
12-06-2020, 09:07 AM
Thank you Lloyd, I've got you on the list!


one alum 8 cav grooved gas check. lws43athotmail.com

Lloyd Smale
12-07-2020, 07:20 AM
thank you sir

KMac
12-07-2020, 07:38 AM
I would like to get in on this.
1 brass 3 cavity NLG HP GC All Pins
kevmcclain at gmail dot com

Lakehouse2012
12-07-2020, 07:56 AM
Morning KMac,

Miha wasn't cutting multiple Cherries for this. You can't have a NLG and a GC (which is in essence a groove). I'm sorry but you will need to decide if the GC is more important, or the NLG.


I would like to get in on this.
1 brass 3 cavity NLG HP GC All Pins
kevmcclain at gmail dot com

KMac
12-07-2020, 07:11 PM
Morning KMac,

Miha wasn't cutting multiple Cherries for this. You can't have a NLG and a GC (which is in essence a groove). I'm sorry but you will need to decide if the GC is more important, or the NLG.

Well let me try this again.

1 brass 3 cavity HP GC All Pins
kevmcclain at gmail dot com

Thanks!

Lakehouse2012
12-07-2020, 07:31 PM
Well let me try this again.

1 brass 3 cavity HP GC All Pins
kevmcclain at gmail dot com

Thanks!

Excellent, I've updated your request on post #.

Thanks,

dimaprok
12-13-2020, 04:06 AM
The 65g would work well for a 1:9 if you are not pushing to the max powder load. and depending on coating or a GC

According to Berger Twist calculator at such short length 0.656" and such weight - 65gr the stability increases dramatically to the point that it will stabilize in 1:14 twist rate at velocity of 2400 fps and higher. The reason I believe it - is because I shot 60gr NOE cast bullets out of my 221FB which has twist rate of 1:14 and there was no keyholing and accuracy was good. I shot between 2560 - 2700+ fps and got between 1.5 - 2 MOA groups with slower being better. Powder coated and homemade gas checks. Now if that doesn't work out I do have .223 in 1:9 and 1:8 twist rate.

With that being said Lakehouse2012 please add me for brass 6 cavity solid gas check version. I really wish Miha could make NLG with GC but I realize that's not an option. This is going to be my first brass mold. email dimaprok at gmail dot com

Lakehouse2012
12-13-2020, 09:44 PM
Thats good detail dimaprok!

I've put you into the GB in slot #5

Thanks,


According to Berger Twist calculator at such short length 0.656" and such weight - 65gr the stability increases dramatically to the point that it will stabilize in 1:14 twist rate at velocity of 2400 fps and higher. The reason I believe it - is because I shot 60gr NOE cast bullets out of my 221FB which has twist rate of 1:14 and there was no keyholing and accuracy was good. I shot between 2560 - 2700+ fps and got between 1.5 - 2 MOA groups with slower being better. Powder coated and homemade gas checks. Now if that doesn't work out I do have .223 in 1:9 and 1:8 twist rate.

With that being said Lakehouse2012 please add me for brass 6 cavity solid gas check version. I really wish Miha could make NLG with GC but I realize that's not an option. This is going to be my first brass mold. email dimaprok at gmail dot com

HiVelocity
12-15-2020, 06:39 PM
Any idea when this GB will close?

HV

Lakehouse2012
12-15-2020, 11:30 PM
Any idea when this GB will close?

HV

Hopfully very soon HV, I'm pushing Miha to move quickly on this one.

HiVelocity
12-19-2020, 01:15 AM
Lakehouse2012-

Thank you, sir. Sure would be an amazing mold to have about NOW.

HV

gvrj
12-20-2020, 08:09 PM
I'll take a 6-cav brass NLG and FB
george at rayclan dot net

Lakehouse2012
12-20-2020, 08:47 PM
I'll take a 6-cav brass NLG and FB
george at rayclan dot net

Thnks Sir, I've got you on the list!

coog83
01-01-2021, 12:35 PM
I'll take 2 of the 3 cavity HP molds.

3 cavity HP / Grooved / GC -- kpatton at take2 dot us
3 cavity HP / NLG / FLAT -- kpatton at take2 dot us

AlHunt
01-01-2021, 01:55 PM
Lakehouse2012, I think I'm going to jump out of this one. I got an inferior non-HP mold to get me on track.

I'll stay subscribed and might jump back in when it goes to last call.

Thanks

Lakehouse2012
01-03-2021, 01:37 AM
Thanks Coog, I've got you down for 2 molds, fingers crossed they start rolling soon...


I'll take 2 of the 3 cavity HP molds.

3 cavity HP / Grooved / GC -- kpatton at take2 dot us
3 cavity HP / NLG / FLAT -- kpatton at take2 dot us

Lakehouse2012
01-03-2021, 01:38 AM
No Proglem At, I'll take you off.


Hope all is well,


Lakehouse2012, I think I'm going to jump out of this one. I got an inferior non-HP mold to get me on track.

I'll stay subscribed and might jump back in when it goes to last call.

Thanks

Minerat
01-03-2021, 02:44 AM
I'm in for 1- 3 cavity, HP, NLG, GC - SteveOB at outdrs dot net

Thanks

Lakehouse2012
01-03-2021, 10:14 AM
I'm in for 1- 3 cavity, HP, NLG, GC - SteveOB at outdrs dot net

Thanks

Thanks Steve, I've added you onto the list

SeabeeMan
01-03-2021, 03:20 PM
Why did this have to catch my eye?!

I'm in for a brass 6 cavity, 66 grain solid NLG, flat base (only option if I understand right).

rich underscore kildow at hotmail dot com

Lakehouse2012
01-03-2021, 03:36 PM
Well, I'm glad it caught your eye :)

Yes, you are correct, the NLG will only come as a FB.

You are all signed up, thanks!


Why did this have to catch my eye?!

I'm in for a brass 6 cavity, 66 grain solid NLG, flat base (only option if I understand right).

rich underscore kildow at hotmail dot com

Stmtrn
01-05-2021, 03:07 AM
I need to back out of this one at this time. Thanks, stmtrn

Sleeping Dog
01-05-2021, 06:46 AM
Can you put me down for

8 Solid, GC, NLG

Lakehouse2012
01-05-2021, 09:46 AM
I need to back out of this one at this time. Thanks, stmtrn

No problem, I've removed you.

Lakehouse2012
01-05-2021, 09:47 AM
Yes Sir, I will add you, but I need a disguised email to list, so that Miha can send you invoice when complete.


Can you put me down for

8 Solid, GC, NLG

Stewbaby
01-05-2021, 10:04 AM
Ill join if ok: 6 cavity solid GC, handles if available

Cstewy96 at gmail dot com

Lakehouse2012
01-05-2021, 10:52 AM
I’ll join if ok: 6 cavity solid GC, handles if available

Cstewy96 at gmail dot com

Thanks Sir, you are on the list!

1I-Jack
01-06-2021, 09:47 PM
8-cavity, NLG, GC with handles...please
nw_trader at hotmail.com

Lakehouse2012
01-06-2021, 10:02 PM
8-cavity, NLG, GC with handles...please
nw_trader at hotmail.com

Thank you Sir, I've added you to the list!

HiVelocity
01-08-2021, 10:39 PM
Are we going to close this group buy soon? Sorry, I'm anxious to get the molds list to MiHa so he can start; fingers crossed.

Thanks,

HV

jessdigs
01-08-2021, 10:48 PM
Are we going to close this group buy soon? Sorry, I'm anxious to get the molds list to MiHa so he can start; fingers crossed.

Thanks,

HV

I was under the impression the the only holdup was that Miha was purchasing a CNC lathe to manufacture his own HP pins so he doesn't have to rely on outside vendors for orders like this.
Maybe that will result in a smaller number of mold orders required for a group buy since he won't have to order hundreds of pins to make it worth his time and effort.

HiVelocity
01-09-2021, 02:37 AM
jessdigs,

Thanks for the heads up, sir. I didn't know. I'll have to ask a good friend of mine, who, believe it or not, lives within walking distance to MiHa's business. Yeah...........

HV

Lakehouse2012
01-09-2021, 09:33 AM
Mornin Guys,

You are both correct. There has been a pin issue with his supplier. He also just took delivery to a new Hass machine yesterday, but I dont know the status on the CNC lathe he was trying to purchase. I've got a text into him and as soon as I get a response (I'm asking if the 65g and 75g molds can be closed) I will update you all and push to keep these moving.


I was under the impression the the only holdup was that Miha was purchasing a CNC lathe to manufacture his own HP pins so he doesn't have to rely on outside vendors for orders like this.
Maybe that will result in a smaller number of mold orders required for a group buy since he won't have to order hundreds of pins to make it worth his time and effort.


Are we going to close this group buy soon? Sorry, I'm anxious to get the molds list to MiHa so he can start; fingers crossed.

Thanks,

HV

HiVelocity
01-10-2021, 12:00 PM
Yep, folks. I got the same information from my friend who lives nearby MiHa. Nice machine he bought.

Fingers crossed; lets hope there's a short learning curve on the new machine, right? Lol!

HV

bpatterson84
01-11-2021, 02:56 PM
I'm #3 on the list, Id like to change to GC base please and thank you!

Lakehouse2012
01-11-2021, 03:08 PM
I'm #3 on the list, Id like to change to GC base please and thank you!

bp- I can change you to GC, however I see that you wanted NLG, if you want GC, you will have to leave the grooves in... Let me know which way you want to go.

bpatterson84
01-11-2021, 03:10 PM
Its gotta be what its gotta be Lakehouse, thanks for the heads up, put me down for the grooves and chex version! Thank you!

Lakehouse2012
01-11-2021, 03:15 PM
I've got you updated! Personally I think that's the better choice... pushing the 65 or 75g projectile out of a 556 at any long distance it will require a GC...



Its gotta be what its gotta be Lakehouse, thanks for the heads up, put me down for the grooves and chex version! Thank you!

SeabeeMan
01-11-2021, 06:24 PM
I've got you updated! Personally I think that's the better choice... pushing the 65 or 75g projectile out of a 556 at any long distance it will require a GC...

That got me thinking...would there be any down side to shooting a grooved boolit with a alternative coating (Hi-Tek, most likely) instead of lube and still running a gas check with it? I suppose this would be compared to a NLG design and relying on the coating to prevent leading. I may switch as well as I hadn't considered that option.

Lakehouse2012
01-11-2021, 08:18 PM
Actually, I think this works well. I do some of loads as Hitek and then GC on top of the coating. It simply provides extra protection from leading.


That got me thinking...would there be any down side to shooting a grooved boolit with a alternative coating (Hi-Tek, most likely) instead of lube and still running a gas check with it? I suppose this would be compared to a NLG design and relying on the coating to prevent leading. I may switch as well as I hadn't considered that option.

SeabeeMan
01-11-2021, 08:40 PM
Did some reading and I'm going to go with that. Please switch me to a 3 cav HP brass, grooved and gas checked. Forgot you can use the blank pins for a non-hp boolit.

Lakehouse2012
01-11-2021, 08:49 PM
You'll be pleased you moved. I put you in slot #6 of the HP section.


Did some reading and I'm going to go with that. Please switch me to a 3 cav HP brass, grooved and gas checked. Forgot you can use the blank pins for a non-hp boolit.

Double D
01-19-2021, 12:20 AM
Lakehouse2012-

Good day, sir! I would like to jump into the group buy, if there is still time:

One, 3-cavity brass mold, HP and grooved with gas check.

Many thanks!!

l t c d u g g i n s (AT) gmail dot com

Lakehouse2012
01-19-2021, 12:34 AM
Welcome to the forum DD!!! I seem to remember the pic in your thumbnail when the family was in Cali?...

I've added you to the GB Sir, thanks!



Lakehouse2012-

Good day, sir! I would like to jump into the group buy, if there is still time:

One, 3-cavity brass mold, HP and grooved with gas check.

Many thanks!!

l t c d u g g i n s (AT) gmail dot com

Sleeping Dog
01-23-2021, 01:46 AM
email is eric at sleepingdogammo dot com

Lakehouse2012
01-23-2021, 03:33 AM
email is eric at sleepingdogammo dot com

Thank you Sir, now I understand which GB you were in and the email is updated.

kywoodwrkr
01-26-2021, 01:13 PM
Please add:
Brass 3-cavity, Grooved, HP, GC
Thanks.
kywoodwrkr at yahoo dot com
Gotta have this for my toy in avatar

Lakehouse2012
01-26-2021, 09:41 PM
Gotta love that avatar!

You are on the list! Thanks


Please add:
Brass 3-cavity, Grooved, HP, GC
Thanks.
kywoodwrkr at yahoo dot com
Gotta have this for my toy in avatar

HiVelocity
01-27-2021, 01:45 AM
Lakehouse-

Any word back from Miha on the 65gr molds running soon?

HV

kywoodwrkr
01-27-2021, 11:53 AM
Gotta love that avatar!

You are on the list! Thanks

Actually, it is/was a real replica, details on back of limber noted original as from around Bowling Green area.
I bought it from a local dealer in Louisville, Ky.
Back in my 'wood working' days.
Was going to restore it, ended up giving it to Kentucky Mountain Artillery.
They are actually a horse back artillery unit but said they'd be able to use it in trades.
I affectionately referred to it as my unconcealable weapon.
Thanks.

blasternank
01-27-2021, 01:19 PM
I will take a 6-cav Brass Solid NLG Gas check and 8-cav Aluminum Solid grooved GC
Bob Nankervis: trockroofingatgmaildotcom

Lakehouse2012
01-27-2021, 02:51 PM
Thanks Bob, I've added you onto both molds.


I will take a 6-cav Brass Solid NLG Gas check and 8-cav Aluminum Solid grooved GC
Bob Nankervis: trockroofingatgmaildotcom

bronte454
02-03-2021, 04:38 AM
Lakehouse could you put me down for a 3 cavity lube groove , gas checked , HollowPoint mold and add a set of handles please. Email is thadd3220 at yahoo dot com . Thank you sir

Lakehouse2012
02-03-2021, 08:26 AM
Yes Sir, you are on the list!


Lakehouse could you put me down for a 3 cavity lube groove , gas checked , HollowPoint mold and add a set of handles please. Email is thadd3220 at yahoo dot com . Thank you sir

coog83
02-08-2021, 10:42 AM
how close are we now?

Lakehouse2012
02-08-2021, 03:59 PM
Unfortunately I can't put a date on it, these GB's are at the mercy of Miha. However our last conversation - I'd say he will be back onto machining and catching up in weeks to come.

Thanks,


how close are we now?

ryanmattes
02-11-2021, 12:56 AM
Please put me down for 6 cavity Solid NLG with handles

ryanmattes@gmail.com

Lakehouse2012
02-11-2021, 01:42 AM
Awesome, I've got you down!


Please put me down for 6 cavity Solid NLG with handles

ryanmattes@gmail.com

Agarbers
02-11-2021, 02:28 PM
Please put me down for one 8-cavity aluminum mold, solid, flatbase, NLG.

alanjamesgarbers(at)yahoo(dot)com

Lakehouse2012
02-11-2021, 04:45 PM
Thanks Sir, I've updated you to the list!


Please put me down for one 8-cavity aluminum mold, solid, flatbase, NLG.

alanjamesgarbers(at)yahoo(dot)com

mozee
02-11-2021, 05:48 PM
Is it possible to do a 2 cavity for a magma machine?

Lakehouse2012
02-11-2021, 05:57 PM
Is it possible to do a 2 cavity for a magma machine?

Yes, but not in this GB. I'll PM you directly with more details.

jmcghee
02-11-2021, 07:31 PM
I would like a 3 cavity brass, no lube grove, hollow point , thanks

jamesallen1954@gmail,com

Lakehouse2012
02-15-2021, 06:45 PM
Yes Sir, I've added you onto the list! Thanks!



I would like a 3 cavity brass, no lube grove, hollow point , thanks

jamesallen1954@gmail,com

Iskoda
02-16-2021, 05:05 PM
Please add a brass 3cavity hollow no lube or gc

iskoda1@hotmail.com

Lakehouse2012
02-16-2021, 08:51 PM
Hi Iskoda,

I've got you added. Let me know if I read that wrong.


Please add a brass 3cavity hollow no lube or gc

iskoda1@hotmail.com

geslayton
02-18-2021, 10:11 AM
Put me down for a 3 cavity brass hp NLG FB and a set of handles please.

geslayton at gmail dot com

Sent from my moto e5 cruise using Tapatalk

Dimner
02-18-2021, 02:17 PM
sorry for another change...

please remove : Brass 6 cav - (dimner) - 6 cav, NLG, FB - dimner at gmail dot com

And please add: Aluminum 8 cav - (dimner) - 8 cav, Grooved, GC - dimner at gmail dot com

Lakehouse2012
02-18-2021, 08:19 PM
Yes Sir, I've added you to the list!


Put me down for a 3 cavity brass hp NLG FB and a set of handles please.

geslayton at gmail dot com

Sent from my moto e5 cruise using Tapatalk

Lakehouse2012
02-18-2021, 08:21 PM
I've got you updated :)


sorry for another change...

please remove : Brass 6 cav - (dimner) - 6 cav, NLG, FB - dimner at gmail dot com

And please add: Aluminum 8 cav - (dimner) - 8 cav, Grooved, GC - dimner at gmail dot com

Dieselhorses
02-19-2021, 01:11 AM
Gonna do the brass 3 cavity HP, NLG, FB W/handles.

Way2kajun at Yahoo dot com


Sent from my iPhone using Tapatalk

Lakehouse2012
02-19-2021, 09:42 AM
Thankyou Sir, I've got you on the list!



Gonna do the brass 3 cavity HP, NLG, FB W/handles.

Way2kajun at Yahoo dot com


Sent from my iPhone using Tapatalk

iMigraine
02-21-2021, 02:38 PM
Hey Lakehouse,

Could you please edit my original order to this request?

8 CAV, Solid, GAS CHECK, NLG please.

Thanks.

imigraine AT g m a i l DOT c o m

Lakehouse2012
02-21-2021, 07:35 PM
Hi imigraine,

Unfortunately this GB isnt making seperate cherry's for lube and NLB, so you can't have the GC with the NLB. You will have to decide if the GC is more important than the lube groove.




Hey Lakehouse,

Could you please edit my original order to this request?

8 CAV, Solid, GAS CHECK, NLG please.

Thanks.

imigraine AT g m a i l DOT c o m

iMigraine
02-22-2021, 12:08 AM
Hi imigraine,

Unfortunately this GB isnt making seperate cherry's for lube and NLB, so you can't have the GC with the NLB. You will have to decide if the GC is more important than the lube groove.

No problem, want the gas check. 8 Cav, Solid, Gas Check, Lube Grove please.

Lakehouse2012
02-22-2021, 12:13 AM
Ok, cool! I've updated you on the list.


No problem, want the gas check. 8 Cav, Solid, Gas Check, Lube Grove please.

Plate plinker
02-22-2021, 11:10 AM
LH, I need two change my order from 2 molds to just one. Thanks

Lakehouse2012
02-22-2021, 11:23 AM
LH, I need two change my order from 2 molds to just one. Thanks

Ok, no problem, I've updated you on the list.

ilium
02-22-2021, 07:44 PM
6 cavity brass; solid, flat base, NLG with handles.
iliumconst at gmail dot com

Lakehouse2012
02-23-2021, 12:26 AM
Thanks, I've added you to the list!


6 cavity brass; solid, flat base, NLG with handles.
iliumconst at gmail dot com

jessdigs
02-23-2021, 12:46 AM
I have been waiting for this one.
I would like 1 brass 3 cavity NLG HP
And
1 brass 6 cavity solid NLG

2 molds
jessdigs at Gmail dot com

Sent from my Pixel 4 XL using TapatalkI just noticed on the list my second mold is listed as 6 cavity Brass solid GC. I would like it to be 6 cav brass solid nlg
Can we change that please?
Sent from my Pixel 4 XL using Tapatalk

Lakehouse2012
02-23-2021, 01:17 AM
Thanks for catching that jessdigs! I've updated your second mold to NLG.

These are getting close to production, I can feel it....



I just noticed on the list my second mold is listed as 6 cavity Brass solid GC. I would like it to be 6 cav brass solid nlg
Can we change that please?
Sent from my Pixel 4 XL using Tapatalk

coog83
02-23-2021, 04:35 PM
LakeHouse, I hope your feeling is good, as I'm ready to get these.

jessdigs
02-23-2021, 06:35 PM
Thank you lakehouse. Looking forward to it. This will be my first Group buy that closed.


Sent from my iPhone using Tapatalk Pro

1I-Jack
02-23-2021, 11:01 PM
Hi imigraine,

Unfortunately this GB isnt making seperate cherry's for lube and NLB, so you can't have the GC with the NLB. You will have to decide if the GC is more important than the lube groove.

You hadn't mentioned this when I posted my order "15) (1I-Jack 1I-Jack) - 8-cav, NLG, GC +handles". Please change mine to 8-cav, GC , LG + handles.

Lakehouse2012
02-24-2021, 08:28 AM
You hadn't mentioned this when I posted my order "15) (1I-Jack 1I-Jack) - 8-cav, NLG, GC +handles". Please change mine to 8-cav, GC , LG + handles.

I've updated you, thanks,

Wolfdog91
02-25-2021, 06:37 AM
Can you put me down for one HP,gas checked ,No lube grove please ?
wolfdogmcdowell91@gmail.com
Thanks !

Wolfdog91
02-25-2021, 06:40 AM
Nevermind just read their not doing a gas check NLG with this one either ,my apologies. Take me off.

Minerat
02-25-2021, 04:48 PM
Wolf, sure they are look at the 3 cavity brass it is the only HP mould and you can get it NLG with a check.

Wolfdog91
02-25-2021, 07:27 PM
Wolf, sure they are look at the 3 cavity brass it is the only HP mould and you can get it NLG with a check.

Really ? Dang I need to learn to read lol.
Please put me down for 1 HP NLG GC 3 cave brass.
Sorry for all the confusion lol.
wolfdogmcdowell91@gmail.com

Lakehouse2012
02-26-2021, 09:03 AM
Thanks Steve!

Wolfdog, I've added you into the GB. I am reaching back to Miha, to make sure he is cutting Cherrys for grooved and NLG with GC.


Really ? Dang I need to learn to read lol.
Please put me down for 1 HP NLG GC 3 cave brass.
Sorry for all the confusion lol.
wolfdogmcdowell91@gmail.com

Minerat
02-26-2021, 11:09 AM
Glad to help LH, did not want him to miss out if he wanted one of these.

Devon
02-26-2021, 07:01 PM
Put me down for one mold.

3 cavity HP (Brass mold) (Lube groove) with (Gas Check).

hubbardappraisal at gmail.com

Lakehouse2012
02-26-2021, 07:57 PM
You are on the list! Thanks


Put me down for one mold.

3 cavity HP (Brass mold) (Lube groove) with (Gas Check).

hubbardappraisal at gmail.com

Cave
02-28-2021, 06:22 PM
Can you add me for 1-65 grains as an solid w/grooves GC 6cav brass with handles

Lakehouse2012
03-01-2021, 11:30 AM
Welcome to the group! I have added you to the GB. Thanks,


Can you add me for 1-65 grains as an solid w/grooves GC 6cav brass with handles

jessdigs
03-05-2021, 02:28 AM
Thanks Steve!

Wolfdog, I've added you into the GB. I am reaching back to Miha, to make sure he is cutting Cherrys for grooved and NLG with GC.

Is there a possibility that he may be doing NlG with GC?



Sent from my iPhone using Tapatalk Pro

iMigraine
03-05-2021, 08:16 PM
Hi Lakehouse, could you please remove my name off the group buy list? I found a mould that will suit my needs better. Thanks.

10) (iMigraine) - 8 cav, solid, Grooved, GC - i m i g r a i n e AT gmail dot com

Whitecobra
03-06-2021, 05:27 PM
I'd like to get on the list, 6 cavity, NLG, Flat Base,. whitecobra_1997 at msn.com.
How & when do I pay for it? Approximately when will they ship?

jwoolley
03-06-2021, 07:00 PM
I’d like an 8 cav NLG GC, please add me to the list. jwoolley1987 at gmail dot com

Agarbers
03-06-2021, 09:57 PM
Lakehouse2012,
Can you please remove me from the list? I have sold the rifle I was getting this for.
17) (Agarbers) - 8-cav alum, Solid, NLG - alanjamesgarbers(at)yahoo(dot)com

BK7saum
03-06-2021, 10:10 PM
I would like a
1). 6 cavity brass, NLG, gas check mold

Bradleyk4860 at gmail dot

Thanks.

Minerat
03-07-2021, 07:17 PM
Keep discussion in this thread for mould orders only. All others will be deleted.

Steve, Cast Boolits moderator.

Lakehouse2012
03-07-2021, 09:49 PM
Hi Lakehouse, could you please remove my name off the group buy list? I found a mould that will suit my needs better. Thanks.

10) (iMigraine) - 8 cav, solid, Grooved, GC - i m i g r a i n e AT gmail dot com

Yes Sir, I've removed you.

Lakehouse2012
03-07-2021, 09:52 PM
I'd like to get on the list, 6 cavity, NLG, Flat Base,. whitecobra_1997 at msn.com.
How & when do I pay for it? Approximately when will they ship?

Hi Whitecobra, I have added you onto the list. I dont have a date these will build yet, this is from Miha, but I am guessing it will be soon.

Lakehouse2012
03-07-2021, 09:53 PM
Lakehouse2012,
Can you please remove me from the list? I have sold the rifle I was getting this for.
17) (Agarbers) - 8-cav alum, Solid, NLG - alanjamesgarbers(at)yahoo(dot)com

No problem, I've removed you.

Lakehouse2012
03-07-2021, 09:55 PM
Id like an 8 cav NLG GC, please add me to the list. jwoolley1987 at gmail dot com

Hi, I've added you onto the list!

Lakehouse2012
03-07-2021, 09:57 PM
I would like a
1). 6 cavity brass, NLG, gas check mold

Bradleyk4860 at gmail dot

Thanks.

I've added you to the list!

pjh421
03-07-2021, 10:12 PM
Can I get an 8 cav with grooves and gas check please? originalpjh421 AT g mail dot com

Lakehouse2012
03-07-2021, 10:18 PM
Can I get an 8 cav with grooves and gas check please? originalpjh421 AT g mail dot com

Yes Sir, I've added you onto the list!

Lakehouse2012
03-08-2021, 12:44 AM
LAST CALL on 07MAR2021

pjh421
03-08-2021, 12:42 PM
Thank you!

Mr Poison Ivy
03-09-2021, 10:19 PM
Crap I'm late. Still able to hop on this? I JUST saw this in my group on FB

if possible I'd like 8 cav flat base NLG
Garlandivy at Gmail dot com

Lakehouse2012
03-10-2021, 09:53 AM
Crap I'm late. Still able to hop on this? I JUST saw this in my group on FB

if possible I'd like 8 cav flat base NLG
Garlandivy at Gmail dot com

you are on the list!

geslayton
03-10-2021, 08:47 PM
New to group buys here...maybe other are as well.

What does Last Call mean? Are these molds going into production? Or, just got enough orders to get put in the line?

Sent from my moto e5 cruise using Tapatalk

Lakehouse2012
03-10-2021, 09:18 PM
New to group buys here...maybe other are as well.

What does Last Call mean? Are these molds going into production? Or, just got enough orders to get put in the line?

Sent from my moto e5 cruise using Tapatalk

Last call means there are more orders than required, to produce the mold. At this point it means that as soon as Miha has space on his equipment, he will run the GB and start shipping.

Unfortunately there is no exact timing, we all understand that we have to be patient. MP-molds (Miha) is having plenty of issues stocking raw material and keeping up with demand.

geslayton
03-10-2021, 09:27 PM
Last call means there are more orders than required, to produce the mold. At this point it means that as soon as Miha has space on his equipment, he will run the GB and start shipping.

Unfortunately there is no exact timing, we all understand that we have to be patient. MP-molds (Miha) is having plenty of issues stocking raw material and keeping up with demand.Awesome! No problem waiting, just wanted some clarification on what it meant. Thanks for the info!

Sent from my moto e5 cruise using Tapatalk

xiholdtruex
03-14-2021, 11:58 PM
just noticed this thread going is there anyway to still jump in on this GB?

I would like 8-cav, LG, GC
xiholdtruex at gmail dot com

If possible

thanks in advance

Lakehouse2012
03-15-2021, 12:29 AM
You are just in time! I've got you on the list!


just noticed this thread going is there anyway to still jump in on this GB?

I would like 8-cav, LG, GC
xiholdtruex at gmail dot com

If possible

thanks in advance

glockky
03-15-2021, 06:37 AM
Im in 3 cavity hp gas check twgrubb3 at gmail dot com

Lakehouse2012
03-15-2021, 11:54 AM
I’m in 3 cavity hp gas check twgrubb3 at gmail dot com

I've got you on the list, thanks!!

xiholdtruex
03-16-2021, 04:35 PM
Could you also add me to the list for the

3cav, HP, GC, and lube grooves

Thanks in advance

xiholdtruex at gmail dot com

Lakehouse2012
03-16-2021, 06:46 PM
Could you also add me to the list for the

3cav, HP, GC, and lube grooves

Thanks in advance

xiholdtruex at gmail dot com

Yes Sir, I've got you on the list!

Evoken
03-17-2021, 06:26 AM
I would like to get on this if possible.
3 cav HP, gc, nlg, and handles.
Good email is kshj31@yahoo.com
Thanks,
Ken

Whitecobra
03-17-2021, 08:35 AM
Please give a "heads up" here when the invoices start being sent!! I would hate to miss it if it ends up in my "junk" folder.

SeabeeMan
03-17-2021, 02:36 PM
Agreed, I was just worrying about that. A heads up from the honcho or anybody else who has gotten one would be much appreciated.

Now that I've said that, that may well be common practice. I haven't done a group buy since back in the days of JTKnives/HM2 for a buckshot mold I recently sold.

Lakehouse2012
03-17-2021, 06:48 PM
I would like to get on this if possible.
3 cav HP, gc, nlg, and handles.
Good email is kshj31@yahoo.com
Thanks,
Ken

Thanks Ken, you are on the list!

Lakehouse2012
03-17-2021, 06:50 PM
Agreed, I was just worrying about that. A heads up from the honcho or anybody else who has gotten one would be much appreciated.

Now that I've said that, that may well be common practice. I haven't done a group buy since back in the days of JTKnives/HM2 for a buckshot mold I recently sold.

Yes guys, when Miha starts invoicing, he always makes a post on the thread to let us all know.

greekman
03-18-2021, 05:05 PM
8-cav (Aluminum mold) (NLG) with (Flat base) and handles please

greekman1122 at yahoo dot com

thanks
steven thomopoulos

Lakehouse2012
03-18-2021, 06:26 PM
8-cav (Aluminum mold) (NLG) with (Flat base) and handles please

greekman1122 at yahoo dot com

thanks
steven thomopoulos

I've got you on the list!

jessdigs
03-21-2021, 11:35 PM
Lakehouse, I thought you mentioned a while ago that there was a chance that miha may be cutting cherries for nlg with and without gas check. Did anything ever come of that or was I mistaken?

Sent from my Pixel 4 XL using Tapatalk

Lakehouse2012
03-22-2021, 08:32 AM
Lakehouse, I thought you mentioned a while ago that there was a chance that miha may be cutting cherries for nlg with and without gas check. Did anything ever come of that or was I mistaken?

Sent from my Pixel 4 XL using Tapatalk

I have the request into Miha, but have not heard feedback from him on this issue.

pack3480
03-24-2021, 01:25 AM
pack3480, dcasad(at)hotmail(dot)com, 1. 8cav Aluminum solid GC, LG with handles

Lakehouse2012
03-24-2021, 07:26 AM
pack3480, dcasad(at)hotmail(dot)com, 1. 8cav Aluminum solid GC, LG with handles

Thanks, I've got you on the list!

SoonerEd
03-25-2021, 11:47 PM
Please add me for a brass 6 cavity, lube groove, gas check. Thanks

Ed at trilogy-health dot com.