PDA

View Full Version : Conversions


gpidaho
03-20-2020, 01:04 PM
Does anyone have a link for a cutting jig 223Rem to 7.62X25? PM me or post please. Gp
nhithaca
03-20-2020, 02:43 PM
Starline does sell 7.62x25 brass new by the bag. Just saying.
gpidaho
03-20-2020, 02:54 PM
Starline does sell 7.62x25 brass new by the bag. Just saying.

Thank you for the reply nhthaca. Yes, I know I have some on the way. Some of us have buckets of 223 brass and being retired like to tinker with things in our hobby. Just because we can. I've made so much Blackout brass I now most likely have enough to last me out.My jig for the BO with the Harbor Freight chop saw works so well that I was hoping to find one for the one inch needed for the Tok. I'll probably just make one. Best Gp
jrayborn
03-22-2020, 08:13 AM
That's what I did. Pretty much exactly. Got one to make blackout brass and made my own for 7.62x25. Works great.
Reverend Al
03-22-2020, 06:11 PM
You can buy one on eBay for $12.00 that will work with your Harbour Freight chop saw ...

https://www.ebay.com/itm/New-223-to-Tokarev-Trimming-Jig-for-HF-2-Mini-Saw-SAFE-Scratchless-Design-/112646170487
gpidaho
03-22-2020, 08:58 PM
You can buy one on eBay for $12.00 that will work with your Harbour Freight chop saw ...

https://www.ebay.com/itm/New-223-to-Tokarev-Trimming-Jig-for-HF-2-Mini-Saw-SAFE-Scratchless-Design-/112646170487
Thank you Reverend Al for the link. I just took a piece of scrap oak and drilled the appropriate size hole in the end grain and locked her down in the clamp. Works great. Another Rednek fix without duct tape. Should have thought of this before the post. Gp